Schwinn High Sierra?
#1
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 551
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 277 Times
in
108 Posts
Schwinn High Sierra?
I'm looking to build up a winter bike and came across this one. I'm not sure what the different years offered, but is this one worth spending the time and money to refurb? What size does it appear to be? Thanks!
If you've seen any of my other recent posts... it looks like I have a new hobby.
If you've seen any of my other recent posts... it looks like I have a new hobby.
#2
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
That's an interesting one. U-brakes front and rear but not on the chainstays (they look like Deore or perhaps Dia Compe brakes). Fillet-brazed headtube but TIG-welded rear end. Lugged unicrown fork. Black chrome.
I would guess it's a 1987.
As to whether it's worth getting/restoring, yes these are great bikes. The High Sierra was Schwinn's top of the line mountain bike until 1985, when the Cimarron was introduced, after which it was the 2nd best until Schwinn revamped it's MTB models a few years later. Yours was most likely made by Giant of Taiwan under contract, and the build quality and weight on these is pretty good for a production MTB of this period. The one you found has some wear but would clean up well.
I have an '86 High Sierra that I use for touring and gravel riding and it's a pretty dang good bike. Mine was built from the frame so no stock parts, but the OEM parts on these were pretty much always very good. One thing to note is I think the '87 would have come with Suntour XC Sport Roller Cam brakes, so yours might have been switched out for those U-brakes at some point.
I would guess it's a 1987.
As to whether it's worth getting/restoring, yes these are great bikes. The High Sierra was Schwinn's top of the line mountain bike until 1985, when the Cimarron was introduced, after which it was the 2nd best until Schwinn revamped it's MTB models a few years later. Yours was most likely made by Giant of Taiwan under contract, and the build quality and weight on these is pretty good for a production MTB of this period. The one you found has some wear but would clean up well.
I have an '86 High Sierra that I use for touring and gravel riding and it's a pretty dang good bike. Mine was built from the frame so no stock parts, but the OEM parts on these were pretty much always very good. One thing to note is I think the '87 would have come with Suntour XC Sport Roller Cam brakes, so yours might have been switched out for those U-brakes at some point.
Last edited by TenGrainBread; 09-11-19 at 08:13 AM.
Likes For TenGrainBread:
#3
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 551
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 277 Times
in
108 Posts
That's an interesting one. U-brakes front and rear but not on the chainstays (they look like Deore or perhaps Dia Compe brakes). Fillet-brazed headtube but TIG-welded rear end. Lugged unicrown fork. Black chrome.
I would guess it's a 1987.
As to whether it's worth getting/restoring, yes these are great bikes. The High Sierra was Schwinn's top of the line mountain bike until 1985, when the Cimarron was introduced, after which it was the 2nd best until Schwinn revamped it's MTB models a few years later. Yours was most likely made by Giant of Taiwan under contract, and the build quality and weight on these is pretty good for a production MTB of this period. The one you found has some wear but would clean up well.
I have an '86 High Sierra that I use for touring and gravel riding and it's a pretty dang good bike. Mine was built from the frame so no stock parts, but the OEM parts on these were pretty much always very good. One thing to note is I think the '87 would have come with Suntour XC Sport Roller Cam brakes, so yours might have been switched out for those U-brakes at some point.
I would guess it's a 1987.
As to whether it's worth getting/restoring, yes these are great bikes. The High Sierra was Schwinn's top of the line mountain bike until 1985, when the Cimarron was introduced, after which it was the 2nd best until Schwinn revamped it's MTB models a few years later. Yours was most likely made by Giant of Taiwan under contract, and the build quality and weight on these is pretty good for a production MTB of this period. The one you found has some wear but would clean up well.
I have an '86 High Sierra that I use for touring and gravel riding and it's a pretty dang good bike. Mine was built from the frame so no stock parts, but the OEM parts on these were pretty much always very good. One thing to note is I think the '87 would have come with Suntour XC Sport Roller Cam brakes, so yours might have been switched out for those U-brakes at some point.
#4
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Oh yes, sorry I was going to comment on size but forgot. It does look like one of the smaller sizes. I think the smallest sizes these came in were 18" and 20". I would guess this one is one of those sizes, probably an 18". You can always ask the seller to measure the seat tube from the middle of the crank fixing bolt to the middle of the top tube.
Likes For TenGrainBread:
#5
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Just some info about the bike for your knowledge, if you do end up picking it up:
- From the pictures, the wheels look pretty new. I don't see much in the way of brake track wear and the rims and hubs look clean. This could either mean they are the stock wheels and the bike hasn't been ridden much, or that the wheels were replaced recently. I would ask if they are the original wheels when meeting the seller. If they are replacement wheels, ask if the bike has been in an accident, and check the fork and front end of the frame for crash damage.
- The stem is the stock stem, but was originally black-anodized and now that anodizing has faded to bronze, which is common for certain black anodizing solutions used on bicycle parts over the last 30 years. The fading is a result of sun exposure. So I would guess that bike has seen some time outside, perhaps stored on a porch or against a tree, which means it might have seen some rain. Be prepared with allen keys when you meet the seller to test that the stem and seatpost are not stuck. If they are, you can reconsider purchasing or at least use these points to negotiate the price down.
- If you ever need to replace the headset for some reason, I believe these bikes had JIS forks/frames, not the more common ISO standard. Meaning the headset cup size and crown race are slightly different than normal. JIS headsets are available.
Likes For TenGrainBread:
#7
Senior Member
Join Date: Oct 2012
Location: Twin Cities, Minnesota, USA
Posts: 1,257
Bikes: 2017 Salsa Carbon Mukluk frame built with XT, 2018 Kona Rove NRB build with Sram Apex 1,2008 Salsa El Mariachi, 1986 Centurion Ironman
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Liked 100 Times
in
65 Posts
That's an interesting one. U-brakes front and rear but not on the chainstays (they look like Deore or perhaps Dia Compe brakes). Fillet-brazed headtube but TIG-welded rear end. Lugged unicrown fork. Black chrome.
I would guess it's a 1987.
As to whether it's worth getting/restoring, yes these are great bikes. The High Sierra was Schwinn's top of the line mountain bike until 1985, when the Cimarron was introduced, after which it was the 2nd best until Schwinn revamped it's MTB models a few years later. Yours was most likely made by Giant of Taiwan under contract, and the build quality and weight on these is pretty good for a production MTB of this period. The one you found has some wear but would clean up well.
I have an '86 High Sierra that I use for touring and gravel riding and it's a pretty dang good bike. Mine was built from the frame so no stock parts, but the OEM parts on these were pretty much always very good. One thing to note is I think the '87 would have come with Suntour XC Sport Roller Cam brakes, so yours might have been switched out for those U-brakes at some point.
I would guess it's a 1987.
As to whether it's worth getting/restoring, yes these are great bikes. The High Sierra was Schwinn's top of the line mountain bike until 1985, when the Cimarron was introduced, after which it was the 2nd best until Schwinn revamped it's MTB models a few years later. Yours was most likely made by Giant of Taiwan under contract, and the build quality and weight on these is pretty good for a production MTB of this period. The one you found has some wear but would clean up well.
I have an '86 High Sierra that I use for touring and gravel riding and it's a pretty dang good bike. Mine was built from the frame so no stock parts, but the OEM parts on these were pretty much always very good. One thing to note is I think the '87 would have come with Suntour XC Sport Roller Cam brakes, so yours might have been switched out for those U-brakes at some point.
__________________
Don't complain about the weather and cower in fear. It's all good weather. Just different.
Don't complain about the weather and cower in fear. It's all good weather. Just different.
Likes For revcp:
#8
Senior Member
Join Date: Jul 2014
Location: socal
Posts: 4,250
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 878 Post(s)
Liked 812 Times
in
613 Posts
Agree '86 or '87 and great bikes IMO (I have an earlier but very similar model with cantilever brakes). AFAIK, made in Japan which is a big plus to me (mine had a sticker stating that, but was a "barn find" and threw away everything but the frame, had it dipped and powder-coated).
Likes For 2old:
Likes For TenGrainBread:
#10
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
For those saying it might be an '86, it is most likely not. In 1986, the High Sierra frame was TIG-welded. Only the Cimarron that year featured fillet-brazing. Also, this bike is finished in black chrome and in 1986 only the regular Sierra had the black chrome option.
If anyone has a scan of the 1987 ATB catalog spec, that would be greatly appreciated. Below is 1986.
If anyone has a scan of the 1987 ATB catalog spec, that would be greatly appreciated. Below is 1986.
Likes For TenGrainBread:
#11
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 551
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 277 Times
in
108 Posts
Thanks for the input guys. I didn't make it there in time last night and someone else grabbed it!
#12
Senior Member
Join Date: Oct 2012
Location: Twin Cities, Minnesota, USA
Posts: 1,257
Bikes: 2017 Salsa Carbon Mukluk frame built with XT, 2018 Kona Rove NRB build with Sram Apex 1,2008 Salsa El Mariachi, 1986 Centurion Ironman
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Liked 100 Times
in
65 Posts
That's a bummer. Keep your eyes open for another. I'm happy to facilitate if one shows up in the Twin Cities area. Let me know.
__________________
Don't complain about the weather and cower in fear. It's all good weather. Just different.
Don't complain about the weather and cower in fear. It's all good weather. Just different.
Likes For revcp:
#13
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,641
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2607 Post(s)
Liked 1,693 Times
in
932 Posts
That one was an 87-
The 87 High Sierras are really cool, unique and intriguing bikes.
These are from are from the time when MTBs were All Terrain Bikes. Rough Stuff Tourers.
Dual rack/fender mounts on dropouts/fork ends, rack mounts on chain stays and mid-fork, pump peg behind the seat tube, dual bottle eyelets.
This was the 2nd from the top ATB from Schwinn that year (3rd down if you consider the Paramountain frameset TOTL). The High Sierra had full CrMo frame/fork, fillet brazed front end, TIG welded back end and BB, the cool lugged unicrown fork (back then they didn’t trust TIG welding to be strong enough to hold the fork legs together!!!), the outrageously cool black chrome finish, Suntour roller cam brakes, Suntour XC Sport levers, a Shimano Deore (MT-60) drivetrain (when Deore was 2nd from the top under XT) and Joytech sealed bearing hubs with Araya rims. Top it off with the Schwinn “High Sierra” headbadge.
It it was a really really cool and good bike.
The 87 High Sierras are really cool, unique and intriguing bikes.
These are from are from the time when MTBs were All Terrain Bikes. Rough Stuff Tourers.
Dual rack/fender mounts on dropouts/fork ends, rack mounts on chain stays and mid-fork, pump peg behind the seat tube, dual bottle eyelets.
This was the 2nd from the top ATB from Schwinn that year (3rd down if you consider the Paramountain frameset TOTL). The High Sierra had full CrMo frame/fork, fillet brazed front end, TIG welded back end and BB, the cool lugged unicrown fork (back then they didn’t trust TIG welding to be strong enough to hold the fork legs together!!!), the outrageously cool black chrome finish, Suntour roller cam brakes, Suntour XC Sport levers, a Shimano Deore (MT-60) drivetrain (when Deore was 2nd from the top under XT) and Joytech sealed bearing hubs with Araya rims. Top it off with the Schwinn “High Sierra” headbadge.
It it was a really really cool and good bike.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
#14
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 551
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 277 Times
in
108 Posts
Total bummer! Guess I should've jumped fast. It sold for $20!
#15
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 551
Bikes: 1985 Cannondale SR500, 1990 Cannondale ST600, 1993 Cannondale M700
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 277 Times
in
108 Posts
https://www.facebook.com/marketplace...4705549708348/
Here's one listed in excellent condition in Kansas for $350.
Here's one listed in excellent condition in Kansas for $350.
#18
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,641
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2607 Post(s)
Liked 1,693 Times
in
932 Posts
I need to take more pix of my High Sierra-
High Sierra Fillet Brazed by Dave The Golden Boy, on Flickr
1987 Schwinn High Sierra by Dave The Golden Boy, on Flickr
1987 Schwinn High Sierra by Dave The Golden Boy, on Flickr
High Sierra Fillet Brazed by Dave The Golden Boy, on Flickr
1987 Schwinn High Sierra by Dave The Golden Boy, on Flickr
1987 Schwinn High Sierra by Dave The Golden Boy, on Flickr
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
Thread
Thread Starter
Forum
Replies
Last Post
TenGrainBread
Classic & Vintage
42
02-02-23 08:11 PM
corrado33
General Cycling Discussion
9
04-09-17 11:42 PM
waterboy5281
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
11
09-16-15 09:47 AM
starlet119
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
10
11-19-10 01:23 PM