Crank length preference?
#1
Senior Member
Thread Starter
Crank length preference?
I’ve always used 170 and 172.5, I just bought a Shimano triple crankset with 175’s. I’m waiting on the
derailleurs so I haven’t rode with them yet. Anybody switch to a longer crankset and have issues
with them? I have 170 arms on standby just in case.
derailleurs so I haven’t rode with them yet. Anybody switch to a longer crankset and have issues
with them? I have 170 arms on standby just in case.
__________________
Semper fi
Semper fi
#2
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
I somehow settled on 172.5 for my road bikes long ago, but do have 170s on two bikes for various reasons. I think since I never really learned to spin well the slightly longer crank makes pushing a bigger gear easier.
The only bikes I ever had 175s on were MTBs and they came with them like most MTBs did (still do?). The idea being if your seriously mountain biking the longer cranks gives more torque, at least as explained to me many many moons ago.
The only bikes I ever had 175s on were MTBs and they came with them like most MTBs did (still do?). The idea being if your seriously mountain biking the longer cranks gives more torque, at least as explained to me many many moons ago.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#3
Senior Member
Join Date: Nov 2013
Location: Southern California
Posts: 1,467
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Liked 753 Times
in
410 Posts
This is an interesting video. It's long, but worth the watch in my opinion. I'm definitely going to experiment with some shorter cranks if I find any for cheeeeeep.
#4
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,780
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1677 Post(s)
Liked 3,095 Times
in
913 Posts
It's never made much difference to me. I have all three lengths scattered amongst my bikes. I was thinking about that while riding today. Does 2.5 mm make much of a difference if my butt slides 1 cm along the saddle during the ride? If I measure my femur length 10 times, how often will I get the same measurement within 2.5 mm?
To each his own though; I get it if someone wants it just so.
To each his own though; I get it if someone wants it just so.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
Likes For Spaghetti Legs:
#5
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
It's never made much difference to me. I have all three lengths scattered amongst my bikes. I was thinking about that while riding today. Does 2.5 mm make much of a difference if my butt slides 1 cm along the saddle during the ride? If I measure my femur length 10 times, how often will I get the same measurement within 2.5 mm?
To each his own though; I get it if someone wants it just so.
To each his own though; I get it if someone wants it just so.
#6
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
Oh, you really don't want to get me started on this... I am a crank on the subject,
But shorter is better. There just isn't any advantage to longer cranks. People talk about leverage; yes, you have more leverage with longer cranks. That's great, but you don't need leverage. You need to spin. And you will spin better with shorter cranks.
Since the shortest C&V cranks you can find are 165 mm, I recommend 165's. If you can find shorter ones, go for it. You won't regret it for more than a half hour or so.
But shorter is better. There just isn't any advantage to longer cranks. People talk about leverage; yes, you have more leverage with longer cranks. That's great, but you don't need leverage. You need to spin. And you will spin better with shorter cranks.
Since the shortest C&V cranks you can find are 165 mm, I recommend 165's. If you can find shorter ones, go for it. You won't regret it for more than a half hour or so.
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.
#7
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
I tried a pair of 165s once - felt like I'd lowered my saddle 6" or more. Very, very noticeable and weird. I took them off after one ride and put my normal 170s back and they've been there ever since.
What works for some...
DD
What works for some...
DD
Likes For Drillium Dude:
#8
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,517
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,761 Times
in
634 Posts
I have found the slightly longer 175 cranks can help a bit when running a larger range triple but don't seem to make much difference on a basic double or single where I would actually say go shorter to a. 165 for clearance you should be fine on most 80' though 90's road and mtbs. But with 70's stuff especially French and Italian you will have pedal strike clearance issues. Show us a pic of the bike you want to put the 175 and the crank and someone here will tell if it will work help.
Last edited by zukahn1; 05-12-20 at 07:34 PM.
#9
Senior Member
I'm vertically challenged at 5'4. I played around with 165's and 170's on road bikes until I found folding bikes, and decided to experiment with much shorter cranks. My purpose was twofold: shorter cranks for easier packing of the disassembled bike in a suitcase, and let's see what they do to the power curve.
I had Mark Stonich of www.bikesmithdesign.com shorten a couple cranks, which I still have. An Ultegra triple and a 105 double, which started life at 170mm, now both at 148mm.
Power curve results were not encouraging. Easier spinning, which was nice, but greatly reduced leverage. Hills and wind became more pronounced, or maybe just my ability to deal with them. Felt like a spinning hamster wheel going nowhere fast.
In the end, I removed them and went back to my 165 and 170. Might dig them out again for a project or if I need a short crank for a particular frame setup.
I had Mark Stonich of www.bikesmithdesign.com shorten a couple cranks, which I still have. An Ultegra triple and a 105 double, which started life at 170mm, now both at 148mm.
Power curve results were not encouraging. Easier spinning, which was nice, but greatly reduced leverage. Hills and wind became more pronounced, or maybe just my ability to deal with them. Felt like a spinning hamster wheel going nowhere fast.
In the end, I removed them and went back to my 165 and 170. Might dig them out again for a project or if I need a short crank for a particular frame setup.
Last edited by bargainguy; 05-13-20 at 07:56 AM.
#10
Senior Member
Thread Starter
I’m changing the derailleurs to LX and I just picked up a set of Deore 175’s. I have a set of 170 arms with the same bcd, I might switch them.
__________________
Semper fi
Semper fi
#11
Senior Member
Thread Starter
I’m not worried about them fitting on the bike, I’m just not sure if they would be comfortable to use.
__________________
Semper fi
Semper fi
#12
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,517
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,761 Times
in
634 Posts
Also a point to consider almost all component groups with stock gearing low to high old or new are optimized for a 170mm standard crank.
#13
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
My experience is 175s is only on ATBs- but 170s on all my "road" bikes.
I also have stubby legs.
I also have stubby legs.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#14
Senior Member
I moved down for a 160 mm 105 R7000 on mine. It was 165 mm before and my commuter has a 165 mm.
So far is great and I see my cadence is coming up to 80-90 rpm.
Since my commute was majority or rides before the stay home stay healthy, my cadence was on 70s.
When spinning hard on 165 mm last year I got some discomfort on my right knee that went away after couple days.
Also experimented a 145 mm last year and tried it but was too weird.... If some want to try, is a triple JIS one .
So far is great and I see my cadence is coming up to 80-90 rpm.
Since my commute was majority or rides before the stay home stay healthy, my cadence was on 70s.
When spinning hard on 165 mm last year I got some discomfort on my right knee that went away after couple days.
Also experimented a 145 mm last year and tried it but was too weird.... If some want to try, is a triple JIS one .
#15
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,517
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,761 Times
in
634 Posts
[QUOTE=sloar;21471633]I’m changing the derailleurs to LX and I just picked up a set of Deore 175’s. I have a set of 170 arms with the same bcd, I might switch them.
[/QU
On this bike no stay with the 170's and keep it simple. Trek matched there cranks to the frame set using 160, 165.170 and 175 Why rethink something that was already done.
[/QU
On this bike no stay with the 170's and keep it simple. Trek matched there cranks to the frame set using 160, 165.170 and 175 Why rethink something that was already done.
Last edited by zukahn1; 05-12-20 at 07:51 PM.
#16
Senior Member
Join Date: Mar 2015
Location: Western MI
Posts: 2,769
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 656 Post(s)
Liked 469 Times
in
302 Posts
I’ve long subscribed to the belief longer is more leverage for climbing and accelerating and have ridden 175 for the last 30 years. The video makes interesting points about fatigue and hip injury from longer crank arms. Not getting any younger so I might build something with 170 to see how it feels. I’d finally be able to use the take-offs I’ve accumulated over the years.
#17
Senior Member
I stick with 170’s and my knees seem to like it. I would go 165 but they seem hard to find. Right now I have to use a 172.5 on a project and am hesitant. Too close to 175 which I know causes me knee pain. I switched the rings on the 172.5 with bio-pace to maybe lesson the harshness as I go around and push down.
#18
Senior Member
I prefer 175, mostly because they are the most comfortable for me, and I feel like they fit me best. 172.5 or even 170 are OK too. I can feel the difference between all of these, but I'm not sure it makes a huge difference, or any difference in power. Shorter cranks are easier to spin up. Longer ones feel better for stomping big gears up climbs. I should note that my pbh is 36+ inches.
I remember Jobst B giving some long winded explanation of why it doesn't really matter on a ride a long time ago. Can't remember the reasoning though.
I remember Jobst B giving some long winded explanation of why it doesn't really matter on a ride a long time ago. Can't remember the reasoning though.
#19
Senior Member
Join Date: Sep 2005
Location: Hervey Bay, Qld, Australia.
Posts: 2,928
Bikes: Colnago (82, 85, 89, 90, 91, 96, 03), 85 Cinelli, 90 Rossin, 83 Alan, 82 Bianchi, 78 Fountain, 2 x Pinarello, Malvern Star (37), Hillman (70's), 80's Beretto Lo-Pro Track, 80's Kenevans Lo-Pro, Columbus Max (95), DeGrandi (80's) Track.
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 179 Post(s)
Liked 198 Times
in
124 Posts
Most of my bikes have had a crank length of 170mm but I have had the occasional 172.5mm and 175mm cranks and I don't take much notice of the crank length when riding. I also have one bike with 165mm cranks and they do feel slightly small but not to put me off the bike.
#20
Senior Member
Join Date: Dec 2015
Location: San Diego
Posts: 703
Bikes: 1978 Bruce Gordon, 1977 Lippy, 199? Lippy tandem, Bike Friday NWT, 1982 Trek 720, 2012 Rivendell Atlantis, 1983 Bianchi Specialissima?
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 345 Post(s)
Liked 175 Times
in
107 Posts
[QUOTE=sloar;21471633]I’m changing the derailleurs to LX and I just picked up a set of Deore 175’s. I have a set of 170 arms with the same bcd, I might switch them.
quOTE]
If I had both sizes on hand I would try them both and go with what I liked best.
quOTE]
If I had both sizes on hand I would try them both and go with what I liked best.
#21
Senior Member
Join Date: Jun 2018
Location: SW Ohio
Posts: 2,397
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1104 Post(s)
Liked 1,825 Times
in
878 Posts
It's never made much difference to me. I have all three lengths scattered amongst my bikes. I was thinking about that while riding today. Does 2.5 mm make much of a difference if my butt slides 1 cm along the saddle during the ride? If I measure my femur length 10 times, how often will I get the same measurement within 2.5 mm?
To each his own though; I get it if someone wants it just so.
To each his own though; I get it if someone wants it just so.
#22
Senior Member
Join Date: Aug 2015
Posts: 3,297
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1142 Post(s)
Liked 1,739 Times
in
960 Posts
I've been riding mainly 170, but have recently picked up 172.5 for a couple of rides. 165 is hamster cage for me at 6'2".
This thread reminds me that I have Campy SR in 180. I haven't used that bike in years.
This thread reminds me that I have Campy SR in 180. I haven't used that bike in years.
#23
Senior Member
Join Date: Apr 2020
Posts: 331
Bikes: '68 Masi Special road, Grail bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 70 Times
in
58 Posts
all the fit guides and thigh measurements told me I should use 170s which worked out
well as that was stock on all bikes BITD. after 6+ yrs. of hard riding and many miles
my beloved Campys started to crack. I was able to make a trade with a guy for 165s
I liked how I could spin faster but they seemed a bit much which is how I learned that
the size for me is 167.5 hard to find now. glad I have a NOS backup set!
well as that was stock on all bikes BITD. after 6+ yrs. of hard riding and many miles
my beloved Campys started to crack. I was able to make a trade with a guy for 165s
I liked how I could spin faster but they seemed a bit much which is how I learned that
the size for me is 167.5 hard to find now. glad I have a NOS backup set!
#25
Senior Member
Join Date: Apr 2020
Location: Queens NY
Posts: 60
Bikes: '94 Litespeed Ultimate, Litespeed SS, 72 Raleigh Super Course, 73 Raleigh Super Course SS, 81 Panasonic DX2000 chrome, 74 Panasonic Sport modded, 86' Mongoose ATB Chrome modded, 97 Specialized Stumpjumper modded
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Liked 33 Times
in
21 Posts
165mm
I had a bike with 172.5mm cranks and never though about it, until I got a bike (same model) with 165mm cranks realized how much faster and more comfortable I was. My foldy still has 170mm cranks on it, and I often KT tape my knee when I'm on it all day, but other than that its 165mm all day for me. I'm 5ft 10 with a standover height of 31.5 inches and ride 21 inch 53-54cm frames. I ride mostly flat ground city riding.
Cheers! - John
Cheers! - John