1st gen Deore derailleur?
#1
Phyllo-buster
Thread Starter
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
1st gen Deore derailleur?
Has anyone made this work with 7 speed indexed? It was made for 6 speed but I have the 7 speed thumbies and a wheel to go with it. Thanks.
#2
Senior Member
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,989
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Mentioned: 166 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 466 Times
in
256 Posts
Doubt there will be a problem, assuming sufficient lateral travel.
#3
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,802 Times
in
1,800 Posts
I have Deore LX (M550) and nearly identical Exage CX500 nominally 7-speed derailleurs. Both will index shift reliably over 7-speed cogs, but to cover 8 speeds I need to switch the shifters to friction mode.
I examined both derailleurs closely and there's a tiny nub inside each that limits the pivot or swing. It's just enough to cause the derailleurs to nudge out of the 8th largest cog into the 7th with any serious pressure on the pedals in index mode; but it'll hold in friction mode.
One of my bucket list projects is to use a moto tool or jeweler's file to grind down the little nub that limits RD cage swing. If I screw it up on one RD, no biggie, the two models are nearly identical with only minor cosmetic differences and a hyphenated model number distinguishing the two.
I examined both derailleurs closely and there's a tiny nub inside each that limits the pivot or swing. It's just enough to cause the derailleurs to nudge out of the 8th largest cog into the 7th with any serious pressure on the pedals in index mode; but it'll hold in friction mode.
One of my bucket list projects is to use a moto tool or jeweler's file to grind down the little nub that limits RD cage swing. If I screw it up on one RD, no biggie, the two models are nearly identical with only minor cosmetic differences and a hyphenated model number distinguishing the two.
#4
Senior Member
I have used that derailleur with a 7 speed freewheel and downtube shifters. I don’t see why it wouldn’t work with thumbies?
Last edited by trailmix; 09-16-20 at 04:59 PM.
#5
Phyllo-buster
Thread Starter
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
OK, jury says most likely, excellent.
#6
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
I've run one indexed with 10 speed with bar end shifters and it worked surprisingly well. It's now paired with 8 speed on my GF's bike and that's somehow working too. Maybe mine has enough slop in it to be universal.
#7
Senior Member
Go ahead & hook it all up & try it out. If it doesn't work, then get one of these. It will work just fine. (M591's have been a real problem solver on many bikes for me). These work perfect w/7 speed shifters.
Sale on Shimano Deore RD-M591 SGS 9-Speed Rear Derailleur For All type of Bicycles, Mountain Bikes, Mountain Bicycles, Enduro, Gravel and Cross Bikes even eBikes
Sale on Shimano Deore RD-M591 SGS 9-Speed Rear Derailleur For All type of Bicycles, Mountain Bikes, Mountain Bicycles, Enduro, Gravel and Cross Bikes even eBikes
Last edited by ramzilla; 09-16-20 at 07:13 PM.
#8
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
First generation Deore was the so-called "Deer Head" group in 1981, and wasn't designed for indexed shifting.
Likes For JohnDThompson:
#9
Phyllo-buster
Thread Starter
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
Thanks, I meant the post-Deerhead version from '87/88. '89 got the pseudo carbon screen background under 'Deore' and was 7 speed.
#10
Phyllo-buster
Thread Starter
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
Thanks, I meant the post-Deerhead MT-60 version from '87/88. '89 got the MT-62 pseudo carbon screen background under 'Deore' and was 7 speed.
#11
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,502
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,465 Times
in
1,433 Posts
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#12
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,193
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,295 Times
in
865 Posts
The OP's Deore should work well as a 7s SIS derailer.
It looks like the spring from inside of the cable adjuster detent barrel has been placed outside of the plastic detent barrel, instead of inside of it where it is supposed to be. The barrel won't offer retention detents the way it sits now.
It looks like the spring from inside of the cable adjuster detent barrel has been placed outside of the plastic detent barrel, instead of inside of it where it is supposed to be. The barrel won't offer retention detents the way it sits now.
Likes For dddd:
#13
Full Member
Go ahead & hook it all up & try it out. If it doesn't work, then get one of these. It will work just fine. (M591's have been a real problem solver on many bikes for me). These work perfect w/7 speed shifters.
Sale on Shimano Deore RD-M591 SGS 9-Speed Rear Derailleur For All type of Bicycles, Mountain Bikes, Mountain Bicycles, Enduro, Gravel and Cross Bikes even eBikes
Sale on Shimano Deore RD-M591 SGS 9-Speed Rear Derailleur For All type of Bicycles, Mountain Bikes, Mountain Bicycles, Enduro, Gravel and Cross Bikes even eBikes
#14
Senior Member
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,989
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Mentioned: 166 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 466 Times
in
256 Posts
The cassette is a different story.
#15
Senior Member
Yes absolutely. My go to chain for the last few years is the KMC X8.93. It works great on 5, 6, 7, & 8 speed drivetrains. (Also, I've recently noticed that KMC is changing their numbering system on their chains and, it's getting harder to find X8.93's). The most important thing to know about these KMC chains is the X designation. It describes the "double X bridge shape" and, helps make indexed drivetrains work perfectly.
#16
Senior Member
Join Date: Feb 2017
Location: Northern Shenandoah Valley
Posts: 4,141
Bikes: More bikes than riders
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1446 Post(s)
Liked 762 Times
in
570 Posts
Yes, KMC's new designation for the X8.__ chains is simply X8. I think the X8 Silver/Grey is the old X8.93 and the X8 Silver is the old X8.99.
8 Speed Archives - KMC Chain
The X8 series is also my go-to chain for nearly everything. You can often find them for $10-12 online, which is a solid value for a good chain.
8 Speed Archives - KMC Chain
The X8 series is also my go-to chain for nearly everything. You can often find them for $10-12 online, which is a solid value for a good chain.
#17
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
The one with the cranks with the big pedal holes...
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#18
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,157
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 246 Post(s)
Liked 334 Times
in
192 Posts