Normandy competition rear hub with simplex QR.
#1
Senior Member
Thread Starter
Join Date: Aug 2014
Location: Bronx, NYC
Posts: 1,885
Bikes: '19 Fuji Gran Fondo 1.5, '72 Peugeot PX10, '71ish Gitane Super Corsa, '78 Fuji Newest, '89 Fuji Ace, '94 Cannondale R600, early '70s LeJeune Pro project
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 293 Post(s)
Liked 218 Times
in
101 Posts
Normandy competition rear hub with simplex QR.
An orphaned Normandy Competition rear hub with Simplex quick release. It has been cleaned and repacked. $25 plus shipping or open to an offer.
#2
Senior Member
Join Date: Mar 2012
Location: Niagara Region, Canada
Posts: 1,455
Bikes: 1970s Alex Singer, 1960s Peugeot PX 10, 1960s Bertin C37, 1973 Carre Bertin C 37, 1972 Carlton Kermesse, 1981 Peugeot PX 14 Super Competition
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 266 Times
in
157 Posts
greg3rd48 -
Is it French or English threading? Is it 120 or 126 mm spacing?
Is it French or English threading? Is it 120 or 126 mm spacing?
#3
Senior Member
Thread Starter
Join Date: Aug 2014
Location: Bronx, NYC
Posts: 1,885
Bikes: '19 Fuji Gran Fondo 1.5, '72 Peugeot PX10, '71ish Gitane Super Corsa, '78 Fuji Newest, '89 Fuji Ace, '94 Cannondale R600, early '70s LeJeune Pro project
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 293 Post(s)
Liked 218 Times
in
101 Posts
#4
Senior Member
Thread Starter
Join Date: Aug 2014
Location: Bronx, NYC
Posts: 1,885
Bikes: '19 Fuji Gran Fondo 1.5, '72 Peugeot PX10, '71ish Gitane Super Corsa, '78 Fuji Newest, '89 Fuji Ace, '94 Cannondale R600, early '70s LeJeune Pro project
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 293 Post(s)
Liked 218 Times
in
101 Posts
Confirmed English thread but for some unknown reason my calipers are measuring right around 130mm for the axle. Could this even be possible?
#5
“Senior” Member
I will take it if bertinjim is not ahead of me and if the cups and cones were clean/not pitted?
#6
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,588
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
That's a heck of a deal, I paid almost $80 for one of those Q/R skewers back when I was building my PX-10.
#8
Senior Member
Join Date: Mar 2012
Location: Niagara Region, Canada
Posts: 1,455
Bikes: 1970s Alex Singer, 1960s Peugeot PX 10, 1960s Bertin C37, 1973 Carre Bertin C 37, 1972 Carlton Kermesse, 1981 Peugeot PX 14 Super Competition
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 266 Times
in
157 Posts
obuckler -
I asked for the clarifications so people can make a decision, not as a preliminary move towards purchasing. I just got a set of tubular wheels with Luxe Competitions and one set of odd cones is enough.The 130 mm measurement may refer to the overall axle length rather than the locknut face to locknut face measurement.
I asked for the clarifications so people can make a decision, not as a preliminary move towards purchasing. I just got a set of tubular wheels with Luxe Competitions and one set of odd cones is enough.The 130 mm measurement may refer to the overall axle length rather than the locknut face to locknut face measurement.
#9
Senior Member
Thread Starter
Join Date: Aug 2014
Location: Bronx, NYC
Posts: 1,885
Bikes: '19 Fuji Gran Fondo 1.5, '72 Peugeot PX10, '71ish Gitane Super Corsa, '78 Fuji Newest, '89 Fuji Ace, '94 Cannondale R600, early '70s LeJeune Pro project
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 293 Post(s)
Liked 218 Times
in
101 Posts
Sold.
#10
“Senior” Member
My new matched pair of hubs
Ok
lots of rain in Dallas gave me time to shine up the new to me rear hub. Thanks Greg.
Last edited by obuckler; 10-20-18 at 10:55 AM. Reason: Add
Thread
Thread Starter
Forum
Replies
Last Post
Dougbloch
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
8
05-19-18 06:36 PM