Spokes for a kasai hub
09-19-20, 10:14 PM
#1
Senior Member
Thread Starter
Spokes for a kasai hub
Can any one tell me the specs on a the Kasai fs qr dynamo hub? Quick release 36 h for rim brakes. 100mm old. I'm replacing a shiminano alfine dynamo and would like to reuse my spokes if there the correct length. I have tried a dozen spoke calculators but none have the kasai in there database. I have searched the web but comeing up empty handed. I found the specs for a disc brake model though.
Rim is 622 dt swiss tk540 36 h. Erd 600. Lacing pattern 3 cross spokes dt swiss double butted with brass nipples.
Rim is 622 dt swiss tk540 36 h. Erd 600. Lacing pattern 3 cross spokes dt swiss double butted with brass nipples.
09-20-20, 05:15 AM
#2
Senior Member
Join Date: Aug 2017
Posts: 135
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 51 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Is the hub flange diameter & distance between the two flanges on your new hub the same as your old hub? If yes then you should be good (if you're okay with using old spokes), and vice versa if the dimensions don't match.
09-20-20, 05:26 AM
#3
Senior Member
Thread Starter
I guess I should of added I orderd the Kasai hub and do not have it yet. I was hoping to have the spokes on hand when it arrives. The spokes arent really old I built that wheel a few months ago. It only has about 300 hundred miles on it.
09-20-20, 06:57 AM
#5
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
Have you tried calling or emailing the manufacturer?
09-20-20, 10:57 AM
#6
Senior Member
Thread Starter
No sir. Not yet I will do that on monday.
