Best wheels for commuting?
#1
Junior Member
Thread Starter
Best wheels for commuting?
Hey gang, I wondering what kind of wheels you prefer for commuting? Clinchers, Tubeless, Tubular? I was also wondering if a deep rim would be best for cobblestone and crappy roads? Any help would be great, thanks.
#2
Senior Member
Clinchers! I like and ride 2.0 to 2.35 Schwalbe Big Apples for the bad paved roads just like what you are talking about.
#3
Senior Member
Trick question... obviously you want to be on 1,000 gram (front and rear wheels combined) low-profile carbon tubulars mated with $150, 200 gram tires. The lowest rotating mass of any possible wheel option, almost impervious to pinch flats, and the tires stay put safely stuck tight to the rim if you have a sudden deflation.
However, if you are carrying loads, or riding in the rain over sketchy roads, you'll obviously have to ride something heavier and stronger than the dream setup I just listed.
Life is full of compromises...
However, if you are carrying loads, or riding in the rain over sketchy roads, you'll obviously have to ride something heavier and stronger than the dream setup I just listed.
Life is full of compromises...
#4
Overdoing projects
Join Date: Oct 2011
Location: Rotterdam, former republic of the Netherlands
Posts: 2,397
Bikes: Batavus Randonneur GL, Gazelle Orange Excellent, Gazelle Super Licht, Gazelle Grand Tourist, Gazelle Lausanne, Gazelle Tandem, Koga-Miyata SilverAce, Koga-Miyata WorldTraveller
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 784 Post(s)
Liked 1,238 Times
in
686 Posts
Building a commuter around H+Son Archetype rims and hub brakes. Medium-height V-profile rims should be stiff and wide enough for some 37mm tyres.
#5
Senior Member
Join Date: Jul 2014
Location: Toronto, CANADA
Posts: 6,204
Bikes: ...a few.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 2012 Post(s)
Liked 409 Times
in
235 Posts
The best wheels are the ones that are already on the bike and have been for a while. Anything else is going to cost extra. Mine are heavy and robust. They need to be able to be withstand the rigours of my commute--rain, snow, ice, ruts, carrying heavy loads, etc. On the road bike that I ride to work occasionally, well, that's different.
Likes For mcours2006:
#6
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Just make sure that it's not too hard to fix flats on what you've got. 'Cuz you'll probably need to.
#7
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,707
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1952 Post(s)
Liked 2,013 Times
in
1,112 Posts
I see you have a Volpe. When the roads are clear, your good to go with whatever you have. When the tires wear out, I recommend Gatorskins in 28s or 32s. The only reason for new wheels would be to put some snow tires on them and swap wheelsets for the bad days when only hardcore crazies on this sub-forum would ride to work.
Likes For phughes:
#9
Senior Member
Always clinchers. For commuting and everything else.
Tubeless is not worth the trouble IMHO. Not to mention tubulars...
Tubeless is not worth the trouble IMHO. Not to mention tubulars...
Likes For Amt0571:
#10
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
Wheels with a minimum of 32 spokes, I also have few wheels with 36 spokes. I like the simplicity of tire/tube combo...Tubeless and tubulars are just too much trouble and offer no real advantages over the traditional tube/tire combo.
Likes For wolfchild:
#11
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,368
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6220 Post(s)
Liked 4,221 Times
in
2,367 Posts
As for how the wheels are built, strong wheels don’t have to be heavy. In fact, heavy wheels aren’t necessarily stronger. I use very light rims on my off-road touring mountain bike wheels which get more abuse than commuting wheels do. I use either Mavic XM717 or Velocity Aeroheads for most of my builds. The key to a strong, durable wheel is the spokes. Rims add little to the strength of a wheel. My preferred spokes for all my wheels are triple butted (2.3/2.8/2.0mm spokes) from either Pillar or DT Swiss Alpine III. These wheels will carry 40 lbs of gear on rocky roads for hundreds of miles. My touring bike uses similarly built wheels and have provided great service over thousands of heavily loaded miles.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#12
Junior Member
Thread Starter
Thanks everyone for the great advice, I asked because the idea is to potentially convert my bike to single speed for commuting and city riding and just wanted to see what the best possible options may be.
#13
Senior Member
Join Date: Sep 2017
Posts: 7,887
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6972 Post(s)
Liked 10,970 Times
in
4,692 Posts
Commuting is fundamentally a utilitarian endeavor, and hence simpler is better...Hence the recommendation of standard tubed clinchers.
My only other recommendation is to just ride the wheels you have on the bike, as someone else recommended. My commuter has very cheap, nasty wheels - and they roll just fine and stay in true. I won't replace 'em until they start falling apart.
My only other recommendation is to just ride the wheels you have on the bike, as someone else recommended. My commuter has very cheap, nasty wheels - and they roll just fine and stay in true. I won't replace 'em until they start falling apart.
Likes For Koyote:
#14
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4338 Post(s)
Liked 2,981 Times
in
1,617 Posts
I have a fixed gear commuter with two sets of wheels. It's nice to have a backup pair for a quick swap in case you break a spoke or something.
Both clinchers with tubes, both aluminum, one is box section one is aero, one is a little wider, one will not take tires over 28mm. I keep 32mm on the wide ones but they don't fit under the fenders as well so I use them in the summer and the narrower ones in the Winter.
Both clinchers with tubes, both aluminum, one is box section one is aero, one is a little wider, one will not take tires over 28mm. I keep 32mm on the wide ones but they don't fit under the fenders as well so I use them in the summer and the narrower ones in the Winter.
#15
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
Maybe it's just familiarity, but it seems to me that clinchers are the most straightforward when dealing with problems. And with puncture resistant tires, they are virtually maintenance free until they wear out. Resistance to pinch flats doesn't seem like a big enough attraction for tubeless, when riding at fairly high pressure on pavement. Of course that's a YMMV thing.
#17
Senior Member
Join Date: May 2014
Location: USA
Posts: 1,823
Bikes: 1996 Trek 970 ZX Single Track 2x11
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 614 Post(s)
Liked 565 Times
in
429 Posts
Had a set of wheels built-up for commuting on somewhat-rougher urban pavements. Velocity Dyad, DT Swiss spokes/nipples, Continental Tour Ride 47-622 tires, on Shimano Deore XT 36H hubs. Very capable for handling the occasional pothole, lots of seams and upheaved sections, and with the tires it's plenty able to deal with light mud, gravel, sand, and other off-pavement junk. Not the lightest setup around, but quality and durable. Tires I selected exceeded Velocity's recommendation for tire sizes, though they have worked fine. Quite impressed, overall.
If I were to do it again with the same width of tires as the goal, I'd likely select the Velocity Cliffhanger rim over the Dyad.
If I were to do it again with the same width of tires as the goal, I'd likely select the Velocity Cliffhanger rim over the Dyad.
#18
Junior Member
Join Date: May 2013
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Last year, all the punchers are from commuting and not weekend rides. I go with clincher, might get a bit more punchers but a lot easier to fix. Few commuters I know also switch from tubeless to clincher since they got puncher too often due to broken glasses.
#19
☢
Clincher for everything except racing. Otherwise its more trouble than its worth.
Likes For KraneXL:
#21
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
Wider the better to allow more air volume in the tire, this will straighten your sidewalls and let you run fewer PSI in your tires which is beneficial to commuting.
I have run inner tube clinchers, tubulars and tubeless.
I am 100 percent tubeless now which is great because flats self-seal. Cyccocommute is correct in his analysis (per the norm) but I only have one bike to tend to, not 1/2 dozen like him
GOOD LUCK AND HAVE FUN
I have run inner tube clinchers, tubulars and tubeless.
I am 100 percent tubeless now which is great because flats self-seal. Cyccocommute is correct in his analysis (per the norm) but I only have one bike to tend to, not 1/2 dozen like him
GOOD LUCK AND HAVE FUN
Last edited by davei1980; 01-17-20 at 11:23 AM.
#22
Senior Member
I use clinchers for everything, including commuting. I think tubeless is not worth it. Maybe flats are more common with clinchers, but I can fix them in less than 10 minutes without making a mess.
About the rims, all of them work if they can carry the weight you need.
About the rims, all of them work if they can carry the weight you need.
#23
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
I have commuted for some time on both.
I prefer flat bars but drop bars have their advantages.
The main drawback to flatbars is the limited number of hand positions. This is a bigger problem the longer your commute is, if it's short, then maybe not a problem at all. I overcame this problem by mounting MTB bar ends on the inside of the grips to give me a secondary semi-aero position for headwinds or just a change of pace.
My current bike has the Jones H Loop Bar - it's a flat bar by nature but has more hand positions than drops. It's very unorthodox but I highly recommend.
Likes For davei1980:
#24
Very Slow Rider
Join Date: Jul 2017
Location: E Wa
Posts: 1,274
Bikes: Jones Plus LWB, 1983 Centurion Japanese CrMo bike
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 132 Times
in
101 Posts
Had a set of wheels built-up for commuting on somewhat-rougher urban pavements. Velocity Dyad, DT Swiss spokes/nipples, Continental Tour Ride 47-622 tires, on Shimano Deore XT 36H hubs. Very capable for handling the occasional pothole, lots of seams and upheaved sections, and with the tires it's plenty able to deal with light mud, gravel, sand, and other off-pavement junk. Not the lightest setup around, but quality and durable. Tires I selected exceeded Velocity's recommendation for tire sizes, though they have worked fine. Quite impressed, overall.
If I were to do it again with the same width of tires as the goal, I'd likely select the Velocity Cliffhanger rim over the Dyad.
If I were to do it again with the same width of tires as the goal, I'd likely select the Velocity Cliffhanger rim over the Dyad.
I am currently running 3" tires on 50mm rims, no such thing as TOO wide lol!
#25
Full Member
Join Date: Jun 2014
Location: Lakeland,Fl
Posts: 483
Bikes: 2008 Trek Police bike 2019 Jamis Coda Sport 2021 Surly Bridgeclub
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Liked 924 Times
in
304 Posts
That's a matter of deep controversy and personal opinion.
I have commuted for some time on both.
I prefer flat bars but drop bars have their advantages.
The main drawback to flatbars is the limited number of hand positions. This is a bigger problem the longer your commute is, if it's short, then maybe not a problem at all. I overcame this problem by mounting MTB bar ends on the inside of the grips to give me a secondary semi-aero position for headwinds or just a change of pace.
My current bike has the Jones H Loop Bar - it's a flat bar by nature but has more hand positions than drops. It's very unorthodox but I highly recommend.
I have commuted for some time on both.
I prefer flat bars but drop bars have their advantages.
The main drawback to flatbars is the limited number of hand positions. This is a bigger problem the longer your commute is, if it's short, then maybe not a problem at all. I overcame this problem by mounting MTB bar ends on the inside of the grips to give me a secondary semi-aero position for headwinds or just a change of pace.
My current bike has the Jones H Loop Bar - it's a flat bar by nature but has more hand positions than drops. It's very unorthodox but I highly recommend.
Likes For 257 roberts: