PARTING OUT: 1976 Eisentraut Touring Limited
#1
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
PARTING OUT: 1976 Eisentraut Touring Limited
Financial circumstances & changing life goals necessitate sale.
This is not a sale for a complete bike. I have a ton of money sunk into this bike and the only way that to recoup most of it is to part it out.
Below is a photo of the Eisentraut as I built it last autumn. It shows the frame and every part which will be offered for sale here separately:
---
No item should be considered as officially for sale until photos, description, and prices have been provided for that item. I will list items with that information as time allows by updating this thread accordingly.
---
Please note: All sales will ship within CONUS only. Payment will be accepted through PayPal only.
---
Here is the list of what will be offered. As mentioned, when items become officially for sale they will be added to this thread to include photos, descriptions, and prices:
• '76 Eisentraut Touring Limited (54.5 cm) frame and fork w/ Campy Pista headset, Campy Pat. seat post binder bolt, and three lovely unbranded top tube cable cable guides. TBA
•Mavic MA-40 700c & Campy Record (NR) 36h wheelset SOLD LOCALLY
•Campy Record hub replacement axels (chromo rear & titanium front) SOLD LOCALLY
•Rene Herse Stampede Pass "Extra Light" 700c x 32 tires SOLD
•TA Cyclotouriste crankset 28-42-46 SOLD
•PYC 9 speed Super Light chain SOLD
•White Industries cartridge bearing floating bottom bracket w/ two spindles (one chromo 123 mm and one titanium 114 mm) SOLD LOCALLY
• Ritchey Logic titanium crank bolts AVAILABLE
•Suntour Cyclone derailleurs SOLD
•Suntour Blue Line down tube shift levers SOLD
•Suntour Superbe brake calipers (nutted, standard reach) & levers SOLD
• Campy Brev. rear brake drop bolt TBA
•Suntour New Winner 13-15-18-21-25-30 6sp Ultra freewheel SOLD
•Selle San Marco Rolls Titiano saddle (titanium rails) SOLD
•3ttt Record stem - 85 mm reach, 26 mm clamp SOLD
•3ttt Criterium seat post - 27.2 mm SOLD
•3ttt Competizione TDF drop bars w/ 3ttt synthetic leather tape & bar end plugs SOLD
•SR SP-11 pedals SOLD
• Bruce Gordon stainless toe clips SOLD
•Vetta front rack SOLD LOCALLY
• Jim Blackburn rear rack AVAILABLE
• Jim Blackburn bottle cage AVAILABLE
•Honjo hammered fenders SOLD LOCALLY
This is not a sale for a complete bike. I have a ton of money sunk into this bike and the only way that to recoup most of it is to part it out.
Below is a photo of the Eisentraut as I built it last autumn. It shows the frame and every part which will be offered for sale here separately:
---
No item should be considered as officially for sale until photos, description, and prices have been provided for that item. I will list items with that information as time allows by updating this thread accordingly.
---
Please note: All sales will ship within CONUS only. Payment will be accepted through PayPal only.
---
Here is the list of what will be offered. As mentioned, when items become officially for sale they will be added to this thread to include photos, descriptions, and prices:
• '76 Eisentraut Touring Limited (54.5 cm) frame and fork w/ Campy Pista headset, Campy Pat. seat post binder bolt, and three lovely unbranded top tube cable cable guides. TBA
•
•
•
•
•
•
• Ritchey Logic titanium crank bolts AVAILABLE
•
•
•
• Campy Brev. rear brake drop bolt TBA
•
•
•
•
•
•
• Bruce Gordon stainless toe clips SOLD
•
• Jim Blackburn rear rack AVAILABLE
• Jim Blackburn bottle cage AVAILABLE
•
Last edited by deux jambes; 03-20-22 at 07:49 PM.
Likes For deux jambes:
#3
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #1
SOLD
TA Pro 5 Vis Cyclotouriste triple crankset. Set up for half step plus granny. Nearly brand new 46t outer and 42t inner chainrings with hardly any miles ridden. 28t granny is hardly used vintage. Bolts for triple chainrings are recent NOS replacement. Crank arm to chainring bolts are like new Velo Orange upgrades. Vintage crank arms with scuffs and scratches. 9/16th x 20 tpi pedal threads.
$135 shipped
NOTE: I can offer a J.A. Stein T.A. crank arm removal tool that is in used but excellent condition for an additional $30 if interested.
SOLD
NOTE: I can offer a J.A. Stein T.A. crank arm removal tool that is in used but excellent condition for an additional $30 if interested.
Last edited by deux jambes; 03-08-22 at 06:59 PM.
#4
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,053
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4513 Post(s)
Liked 6,388 Times
in
3,673 Posts
But GLWS's
Likes For merziac:
#5
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Items #2 & #3
SOLD
Suntour Cyclone 1st gen derailleurs. Rear GT long cage is a custom deal. I swapped cages between two rears to create a long cage black body derailleur. It works wonderfully with good spring tension and pully cogs show minimal wear. Front derailleur in great cosmetic and functional condition.
Selling derailleurs together as a pair.
$100 shipped
-- -- --
SOLD
Suntour Blue Line shift levers with black infill. Taken apart, cleaned, and rebuilt. Works smooth.
$30 shipped
SOLD
Selling derailleurs together as a pair.
$100 shipped
-- -- --
SOLD
$30 shipped
Last edited by deux jambes; 03-07-22 at 07:40 PM.
#6
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
Sorry to hear that, DJ. Good luck selling.
Love the black Cyclone stuff. Very sharp/cool. Is there a difference between the Sun Tour blue line and black line shifters? I know the ARX were similar but assigned a higher model number and not painted.
Love the black Cyclone stuff. Very sharp/cool. Is there a difference between the Sun Tour blue line and black line shifters? I know the ARX were similar but assigned a higher model number and not painted.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#7
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #4
SOLD
Suntour New Winner Ultra 6 speed freewheel. A custom build. I started the wide range FW and swapped a couple of cogs with another in order to end up with a desired range of 13t, 15t, 18t, 21t, 25t, 30t to use in a half step set up. Cogs show minimal wear, body is flushed and lubed with nicely clicking but quiet pawls. Donor body and remaining cogs are included (note: it has two 14t cigs), as is a Park Tool FR-2 removal tool.
$55 shipped
SOLD
$55 shipped
Last edited by deux jambes; 03-08-22 at 09:09 PM.
#8
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #5
SOLD
Selle San Marco Rolls Titiano saddle with titanium rails. Early version in well worn, but solid condition.
$60 shipped
SOLD
$60 shipped
Last edited by deux jambes; 03-08-22 at 09:10 PM.
#9
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #6
SOLD
Suntour Superbe brake set. 4700 standard reach nutted calipers. Great spring tension. Superbe branding is engraved on caliper while rear caliper is printed. Fairly new Kool Stop salmon pads with little wear. Levers come with Soma gum hoods that fit like a glove and are very comfortable.
$80 shipped$70 shipped
SOLD
Last edited by deux jambes; 03-10-22 at 09:29 AM.
#10
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Items #7 & #8
#7 SOLD LOCALLY
Vetta front rack. Solid condition with some paint wear.
$40 shipped
-- -- --
#8 AVAILABLE FOR SALE:
Jim Blackburn rear rack. Originally raw aluminum silver. Has been spray painted black and is showing some wear to that finish. Otherwise structurally sound.
$40 shipped (includes Jim Blackburn bottle cage previously listed separately)
#7 SOLD LOCALLY
$40 shipped
-- -- --
#8 AVAILABLE FOR SALE:
Jim Blackburn rear rack. Originally raw aluminum silver. Has been spray painted black and is showing some wear to that finish. Otherwise structurally sound.
$40 shipped (includes Jim Blackburn bottle cage previously listed separately)
Last edited by deux jambes; 03-16-22 at 07:39 AM.
#11
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Items #9 & #10
-- -- --
Item #9
SOLD
3ttt Record stem. 85 mm reach. 26 mm clamp.
$50 shipped
-- -- --
Item #10
SOLD
3ttt Competizione bars. TDF bend is a nice shallow drop. 42 cm from end to end. 26 mm clamping. Comes with 3ttt brand synthetic leather, ultra thin, textured, non-adhesive tape. Cream color with some smudging from light use. Can't remember what they called this stuff but apparently it was all the rage back in the day. Extremely comfortable. Black plastic 3ttt bar end plugs included.
$55 shipped
-- -- --
Item #9
SOLD
$50 shipped
-- -- --
Item #10
SOLD
Last edited by deux jambes; 03-08-22 at 06:39 PM.
#12
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Items #11 & #12
Note: Purchase separately as listed below, or purchase together for an additional price break of ten dollars ($100 total, shipped).
-- -- --
Item #11
SALE PENDING
SR SP-11 pedals. Both spin smooth. Super nice for wide feet, and the flip tabs are the best ever!
$60 shipped$55 shipped
-- -- --
Item #12
SOLD
Bruce Gordon stainless steel cages. Size medium. "boot fit" to accommodate size 10 to 11.5 large toe shoes. Very lightweight, yet stout, and a joy to use.
$60 shipped
$55 shipped SOLD
Note: Purchase separately as listed below, or purchase together for an additional price break of ten dollars ($100 total, shipped).
-- -- --
Item #11
SALE PENDING
SR SP-11 pedals. Both spin smooth. Super nice for wide feet, and the flip tabs are the best ever!
-- -- --
Item #12
SOLD
Last edited by deux jambes; 03-20-22 at 07:51 PM.
#13
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
Items #11 & #12
Note: Items are shown paired together, but are sold separately.
-- -- --
Item #11
Available for sale:
SR SP-11 pedals. Both spin smooth. Super nice for wide feet, and the flip tabs are the best ever!
$60 shipped
-- -- --
Item #13
Available for sale:
Bruce Gordon stainless steel cages. Size medium. Boot version to accommodate thicker street shoes and boots. Very lightweight and a joy to use.
$60 shipped
Note: Items are shown paired together, but are sold separately.
-- -- --
Item #11
Available for sale:
SR SP-11 pedals. Both spin smooth. Super nice for wide feet, and the flip tabs are the best ever!
$60 shipped
-- -- --
Item #13
Available for sale:
Bruce Gordon stainless steel cages. Size medium. Boot version to accommodate thicker street shoes and boots. Very lightweight and a joy to use.
$60 shipped
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#14
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #13
SOLD
3ttt Criterium 27.2 seat post. Light scuffs, zig zags, and top tube imprint up to just below flutes. Pretty clean higher up. All should buff and polish out nicely. Clamp and hardware are good. 140 mm from insert line to rail cradle.
$45 shipped
SOLD
Last edited by deux jambes; 03-08-22 at 06:40 PM.
#15
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,679
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2326 Post(s)
Liked 4,997 Times
in
1,780 Posts
Item #6
Available for sale:
Suntour Superbe brake set. 4700 standard reach nutted calipers. Great spring tension. Superbe branding is engraved on caliper while rear caliper is printed. Fairly new Kool Stop salmon pads with little wear. Levers come with Soma gum hoods that fit like a glove and are very comfortable.
$80 shipped
Available for sale:
Suntour Superbe brake set. 4700 standard reach nutted calipers. Great spring tension. Superbe branding is engraved on caliper while rear caliper is printed. Fairly new Kool Stop salmon pads with little wear. Levers come with Soma gum hoods that fit like a glove and are very comfortable.
$80 shipped
__________________
Steel is real...and comfy.
Steel is real...and comfy.
Last edited by jamesdak; 03-08-22 at 09:00 AM.
Likes For jamesdak:
#16
Senior Member
Item #13
Available for sale:
3ttt Criterium 27.2 seat post. Light scuffs, zig zags, and top tube imprint up to just below flutes. Pretty clean higher up. All should buff and polish out nicely. Clamp and hardware are good. 140 mm from insert line to rail cradle.
$45 shipped
Available for sale:
3ttt Criterium 27.2 seat post. Light scuffs, zig zags, and top tube imprint up to just below flutes. Pretty clean higher up. All should buff and polish out nicely. Clamp and hardware are good. 140 mm from insert line to rail cradle.
$45 shipped
#18
Senior Member
Join Date: Sep 2012
Location: Calgary
Posts: 665
Bikes: Condor, Cinelli SC, MKM Metcalfe, Peugeot AE08, Bianchi, Cougar, Miyata, Harry Hall, Holdsworth Special, Raleigh Int'l, Le Croco, Bob Jackson, Zeus
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 102 Times
in
53 Posts
PM coming on the TA crank.
thanks.
Brad
thanks.
Brad
__________________
Better bike .. Better life!
Better bike .. Better life!
#20
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #14
Sorry for the poor house lighting in this next round of photos.
AVAILABLE FOR SALE:
Jim Blackburn bottle cage. Straight. Sturdy. Normal paint wear where water bottle contacts cage. Hardly detectable with a bottle in place.
$25 shipped
Included with Jim Blackburn rear rack previously listed separately. Take both for $40 shipped
Sorry for the poor house lighting in this next round of photos.
AVAILABLE FOR SALE:
Jim Blackburn bottle cage. Straight. Sturdy. Normal paint wear where water bottle contacts cage. Hardly detectable with a bottle in place.
Included with Jim Blackburn rear rack previously listed separately. Take both for $40 shipped
Last edited by deux jambes; 03-16-22 at 07:43 AM.
#21
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #15
SOLD
White Industries floating bottom bracket. Mish mash of comparable parts includes the following:
• 123 mm chomo spindle
• 114 mm titanium spindle
• 2 aluminum locking outer collars
• 4 aluminum bearing cups
• 2 recently installed Enduro 6903 cartridge bearings
I used the longer steel spindle for a TA Pro 5 Vis crank. The titanium spindle could work great for a double.
I can't promise, but I believe these are JIS tapers.
Not the best design for a BB in my opinion. But still serviceable, and perhaps handy. Difficult to set the collars just so. Expect a tiny bit of spindle play perpendicular to the bottom bracket. Just enough to be noticable. Of course, you might be able to dial it in better than I was.
$50 shipped SOLD LOCALLY
SOLD
• 123 mm chomo spindle
• 114 mm titanium spindle
• 4 aluminum bearing cups
• 2 recently installed Enduro 6903 cartridge bearings
I used the longer steel spindle for a TA Pro 5 Vis crank. The titanium spindle could work great for a double.
Not the best design for a BB in my opinion. But still serviceable, and perhaps handy. Difficult to set the collars just so. Expect a tiny bit of spindle play
Last edited by deux jambes; 03-20-22 at 01:48 AM.
#22
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #16
AVAILABLE FOR SALE
Richey Logic 14 mm titanium crank bolts. These were NOS prior to a recent one time installation using copper TI prep. Threading and wrench flats are good as new. Nice stout little bolts that are feather weight and look great if you leave your crank caps off!
$15 shipped
AVAILABLE FOR SALE
Richey Logic 14 mm titanium crank bolts. These were NOS prior to a recent one time installation using copper TI prep. Threading and wrench flats are good as new. Nice stout little bolts that are feather weight and look great if you leave your crank caps off!
$15 shipped
Last edited by deux jambes; 03-20-22 at 01:49 AM.
#23
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #17
SOLD
PYC 9 speed super light chain.
No more than a couple dozen miles on this chain. It performed very well with a 3 x 6 set up using an Ultra spaced Suntour freewheel and Cyclone derailleurs. Wiped clean with a little White Lightning residue left behind, and maybe the tiniest amount of road grime.
108 links plus master link. The 6 links and pins cut from length when new are included as well.
$15 shipped
SOLD
Last edited by deux jambes; 03-09-22 at 07:50 PM.
#24
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Item #18
SOLD LOCALLY
Axle upgrades for Campy Record hubs.
Wheels Manufacturing cro moly quick release rear axle 10 mm x 26 tpi and 146 mm long.
6AI-4V Titanium, QR front axle. USA made, machined from solid billet. 9 mm x 26 tpi and 109.10 mm long.13.6078 grams.
Both brand new and never installed.
Selling as a pair.
$45 shipped
SOLD LOCALLY
Wheels Manufacturing cro moly quick release rear axle 10 mm x 26 tpi and 146 mm long.
Both brand new and never installed.
Selling as a pair.
Last edited by deux jambes; 03-16-22 at 07:51 AM.
#25
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
PM on chain. I’ll take it, please!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super