Mezzo seatpost clamp problem ? Any ideas ?
#1
Senior Member
Thread Starter
Join Date: Sep 2006
Location: NW England/Aveiro
Posts: 638
Bikes: Joey Sport; Mezzo D9;Curve D3; Surly LHT self build cargoesque
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Mezzo seatpost clamp problem ? Any ideas ?
I got a mezzo on ebay, and think/thought I got a bargain.
however, the seatpost won't stay up - I am wondering if there is something missing from the seatpost/qr clamp.
Here are some pictures. Does anyone have any suggestions ? Is something missing ?
Hope it is something simple - advice welcome.
however, the seatpost won't stay up - I am wondering if there is something missing from the seatpost/qr clamp.
Here are some pictures. Does anyone have any suggestions ? Is something missing ?
Hope it is something simple - advice welcome.
#2
Senior Member
I got a mezzo on ebay, and think/thought I got a bargain.
however, the seatpost won't stay up - I am wondering if there is something missing from the seatpost/qr clamp.
Here are some pictures. Does anyone have any suggestions ? Is something missing ?
Hope it is something simple - advice welcome.
however, the seatpost won't stay up - I am wondering if there is something missing from the seatpost/qr clamp.
Here are some pictures. Does anyone have any suggestions ? Is something missing ?
Hope it is something simple - advice welcome.
#3
Senior Member
I don't know anything about Mezzos but that clamp doesn't look right. The top area should be the same diameter as the inside of the seattube.
#5
Senior Member
#7
Senior Member
Thread Starter
Join Date: Sep 2006
Location: NW England/Aveiro
Posts: 638
Bikes: Joey Sport; Mezzo D9;Curve D3; Surly LHT self build cargoesque
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Dear all, there was a shim that got stuck under the saddle which now is sat back where it should be. I have another problem, but will post that on the mezzo thread...
thanks for your help
thanks for your help
#8
Senior Member
Join Date: Sep 2008
Location: York UK
Posts: 3,027
Bikes: 2X dualdrive Mezzo folder,plus others
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 107 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Hi.
you are missing a rubber shim. You can proberly make one.
the mezzo seatpost has no slippage issues.
it can crack as there is a degign fault.
good luck with getting it running.
you are missing a rubber shim. You can proberly make one.
the mezzo seatpost has no slippage issues.
it can crack as there is a degign fault.
good luck with getting it running.
#9
Banned
non Mezzo specific..
I slipped a De lipped frame seat post QR band directly around the seat post itself,..
Stopped post slipping down,
Fold is Just having 2 QR levers stacked on top of each other, to open ..
Stopped post slipping down,
Fold is Just having 2 QR levers stacked on top of each other, to open ..
Thread
Thread Starter
Forum
Replies
Last Post
mattkime
Bicycle Mechanics
5
03-29-18 08:13 PM
shuru421
Classic & Vintage
23
07-31-16 07:19 PM
tiiger
Road Cycling
23
03-31-16 10:49 AM