cudak888 

Putting up some more stuff to add to my list from about a month or two ago. Photos (will be updated throughout the evening): https://www.flickr.com/photos/432401...57714949704172

NOTE: As before, the things specifically marked some off for trade is because I've either received them in prior trades with BF members (and wouldn't feel right about selling whatever it might be), the parts might have been given to me somewhere along the line (as such, a trade trades keep the good bike karma going), or they may be spares from rough Spin dockless bikes I've broken down for parts through the bike donation I've been working on.

If you're interested in anything in particular, PM me. PRICES DO NOT INCLUDE SHIPPING. Local social-distanced pickup is a-OK, if you're in Miami, Florida (but please follow through).

COMPLETE BICYCLES:

• Riese and Müller Birdy BD-1 18" folder w/full elastomer suspension - $350

WHEELS / RIMS / HUBS

• Sunshine ProAim 1978(?) dated, low-flange Nuovo Record clone front hub, 36h $15
• Current-production Sturmey SRF-3 hubs. Have some spare twist-shifters too - TRADES
• A matching pair of Mavic Ksyrium wheels. Same era as the DA7900 group (see below); need to check the model. TRADES ONLY
• One Sturmey-Archer 40 hole 27" 630mm steel rim hoop from a Raleigh Sprite. Very nice condition. Sorry, don't have the front. $10
• One Raleigh Twenty / Chopper rear wheel. Original w/AW hub, AW hub does not engage. Straight, good chrome, galvanized spokes. $30
• One Raleigh Twenty / Chopper rear rim / hoop. Straight, decent chrome. $15
• A 36h 1975(? - need to verify) Sturmey AW I had hoped to lace into the Raleigh Twenty rear rim above. SOLD
• A Raleigh 90mm front hub, 36h. This was also sourced from a Twenty, if I'm not mistaken. $10

TIRES

• NOS Vredestein Paragon EA1 26x1-1/4" tires, blackwall w/brick tread. $20
• Schwinn Stingray 24" tire - NOS, but shopworn. $20

GROUPSETS

• Dura-Ace 7900 crankset, brifters, brakeset, derailers. Crankset has some rash, probably needs new rings. TRADES ONLY

CRANKSETS and CHAINRINGS

• NIB Origin 8 XLT Road Standard crankset w/bottom bracket, black. 53/39t, 172.5mm. $50
• ROTOR noQ 110bcd ramped CNC chainring, black, 52t, $35
• NOS Sugino 144bcd ring, black, factory drillium, 54t - SOLD

BRAKES

• Some rear brake linkage doo-dads from a ProFlex 753. $10
• Virtually new (but used twice), boxed Tektro CR710 low-profile cantilevers, black, one pair - $30

DERAILERS:

• Campagnolo Triomphe RD. Rider quality with ugly and rounded-off Nuovo Grand Sport upper pivot bolt...but it works. Put some Crappy Campy on your Crusty Commuter for Cheap. $15
• Shimano Positron II with shifter. I don't know why anyone would want it...but here it is. $5

SEATPOSTS

• Gipiemme micro-adjust 26.6mm post, black flutes and top. Complete, but needs a polish. Rear edge is rougher as it was gouged up and resurfaced w/o polishing. SOLD

SHIFTERS:

• Accushift-era Suntour friction/index shifters, rider quality at best. No model #. $10

HEADSETS:

• Beat Shimano 600EX HP6200 Arabesque headset. 26.4 crown race, English, but the crown race has a crack, and all the bearing surfaces have divots with exception to the upper cup, which only has three small markings, of which only one really amounts to a pit. The scallop wrench flats have been attacked on the nut, upper raceway meh. Only really usable parts are the upper nut and upper cup. $10 for the whole mess

HANDLEBARS / STEMS

• ATAX 60mm 25.0/22.0 "lugged" French-sized quill stem. Expander slot has been drilled to prevent cracking - $10
• NOS ControlTech quill stem - 22.2mm quill, for 26.0 bars - $15
• Cinelli Giro D'Italia bars w/100mm 1R stem (22.2). New logo. Rider quality; worn surfaces. $60
• Raleigh-badged SR bars and stem, 105mm/22.2. $25

KICKSTANDS

• Brand-new, basic dual-leg kickstands suitable for 26" and some 27" bicycles with kickstand plates. No bolt, but conventional threads (can measure). These are from the Spins. TRADES

SUNDRIES:

• Weinmann/Dia-Compe style clamps, NOS but rusty - $10/set of two
• Weinmann/Dia-Compe style straddle wires, NOS but crusty. 94 and 104mm long - $10/pair
• Tiny cable adjusters - not sure what they're for - but they might fit Raleigh centerpull brake bridges? EDIT: These are 5mm in diameter. I'm told a Raleigh bridge is 4mm, so they won't work. 4 for $10
• Under-the-BB cable guides, purple and black. $5/ea
• A bunch of rusted brake bolts and some crank dustcaps. TA dustcap hex is stripped! $15

-Kurt

top506

Interested in the Ksyrium wheels. What do you need for trade?

Top

cudak888 

PM sent.

BFisher

Pm sent on the AW.

3speedslow

cudak888

Real interested to read the reveal on the English or Italian threading on the 600 headset.

cudak888 

Did the sleuthing. All the gory details have been PM'ed and the listing has been updated.

-Kurt

clubman 

Can I see the Control tech stem? Length?
thx!

cudak888 

Length is 120mm.





-Kurt

clubman 

Thanks Kurt, not quite it.

cudak888 

Couldn't do more than 10 pictures embedded. Some of the rest: