Disposable latex gloves
#1
Senior Member
Thread Starter
Disposable latex gloves
On top of your biking gloves?
Did someone try it to make it windproof/waterproof? Thinking on some cheap solution for the cold temps in the early morning
Did someone try it to make it windproof/waterproof? Thinking on some cheap solution for the cold temps in the early morning
#2
Senior Member
Join Date: Aug 2017
Location: Central Io-way
Posts: 2,672
Bikes: LeMond Zurich, Giant Talon 29er
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1221 Post(s)
Liked 627 Times
in
471 Posts
Sweat is the enemy of warmth imo. If your trying to minimize air flow I'd suggest bar mitts. Those latex gloves will just cause moisture to accumulate quickly, giving heat a rapid path away from your hands. Layering gloves that breathe is the best solution.
#3
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,546
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5223 Post(s)
Liked 3,579 Times
in
2,341 Posts
I can barely get those things on w bare hands, never mind over a glove
this used to be my inexpensive go-to cold-weather solution. the trick is finding another pair of gloves big enough to fit over your regular gloves
this used to be my inexpensive go-to cold-weather solution. the trick is finding another pair of gloves big enough to fit over your regular gloves
#4
Banned
The Crab Trap Handlers off the Alaska Coast Use heavy neoprene gloves, 2 pair ,
seawater there is cold.
For just cold, not wet, get pogies ..
....
seawater there is cold.
For just cold, not wet, get pogies ..
....
Last edited by fietsbob; 10-20-18 at 11:23 AM.
#6
Senior Member
Join Date: Aug 2018
Location: Allen, TX
Posts: 2,633
Bikes: 2021 S-Works Turbo Creo SL, 2020 Specialized Roubaix Expert
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 762 Post(s)
Liked 4,029 Times
in
1,427 Posts
I can tell you that at 10 degrees F, at 70 MPH on a motorcycle, they seem to have no effect at all.
-Matt
-Matt
#7
☢
At the right temperature/wind doesn't sound like a bad idea. You have to experiment with those ratios and let us know the results.
#8
Banned
Other concepts
Is Vapor barrier, Perspiration is a way to lose excess heat, by evaporation,
Blocking that perspiration with a vapor barrier stops the cooling evaporation
and also blocks the insulation from holding the wet condensed perspiration vapor,
so when really cold your insulating layer retains it's loft.
an aluminized vapor barrier also reflects heat back in... your space blanket function..
..
Blocking that perspiration with a vapor barrier stops the cooling evaporation
and also blocks the insulation from holding the wet condensed perspiration vapor,
so when really cold your insulating layer retains it's loft.
an aluminized vapor barrier also reflects heat back in... your space blanket function..
..
#9
Senior Member
Join Date: Jun 2016
Location: Boston Roads
Posts: 975
Bikes: 2012 Canondale Synapse 105, 2017 REI Co-Op ADV 3.1
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 507 Post(s)
Liked 237 Times
in
133 Posts
Is Vapor barrier, Perspiration is a way to lose excess heat, by evaporation,
Blocking that perspiration with a vapor barrier stops the cooling evaporation
and also blocks the insulation from holding the wet condensed perspiration vapor,
so when really cold your insulating layer retains it's loft.
an aluminized vapor barrier also reflects heat back in... your space blanket function..
..
Blocking that perspiration with a vapor barrier stops the cooling evaporation
and also blocks the insulation from holding the wet condensed perspiration vapor,
so when really cold your insulating layer retains it's loft.
an aluminized vapor barrier also reflects heat back in... your space blanket function..
..
There's an explanation of VBL and a lengthy discussion from Andrew Skurka himself here:
https://andrewskurka.com/2011/vapor-...y-application/
Last week I actually saw a cyclist with ziplock bags sticking out of his shoes. It wasn't even in the 30s that morning - low 40s.
#10
Senior Member
Sweat is the enemy. I have a pair of Specialized cold weather gloves from around 2008. They are a two layer system with the outer glove water and wind proof. Can only use the inner glove because my hands freeze with the outer glove on due to sweat buildup. Bar Mitts are a superior solution. You can easily make them yourself out of any waterproof material, too.
#11
Newbie
Join Date: Mar 2018
Location: Colorado
Posts: 2
Bikes: CO-OP Cycles ADV 1.1, CO-OP Cycles ADV 3.1, CO-OP Cycles ARD 1.3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I found it was much warmer to wear the disposable gloves underneath your gloves. I learned about it a few years ago and since I have "sweaty hands", it helps me keep them much warmer. However, they get very wet inside the disposable glove after an hour........
#12
Senior Member
Thread Starter
I got ammex nitrile L size ones from a->z to try out.
On low 40F early morning ride, after some 20 min, it gets sweaty, then I just remove on my traffic stop and move on.
On last Sunday, I was riding under some rain, so had it on top of my bike gloves - after rain passed I just remove them and put into side of my socks.
Then when cleaning and lubing the bike I just used the same gloves and didn't get my hands dirty
So, 100 gloves for below 10 bucks seems a great cheap thing to have around and they are strong enough I can use multiple times without disposing after each use.
On low 40F early morning ride, after some 20 min, it gets sweaty, then I just remove on my traffic stop and move on.
On last Sunday, I was riding under some rain, so had it on top of my bike gloves - after rain passed I just remove them and put into side of my socks.
Then when cleaning and lubing the bike I just used the same gloves and didn't get my hands dirty
So, 100 gloves for below 10 bucks seems a great cheap thing to have around and they are strong enough I can use multiple times without disposing after each use.
#13
vespertine member
Join Date: Jul 2013
Location: Land of Angora, Turkey
Posts: 2,476
Bikes: Yes
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 687 Post(s)
Liked 220 Times
in
163 Posts
I've worn them under other gloves a few times for cool weather downpour conditions.
Something with a waterproof and breathable membrane (like Gore Tex) is likely a better long term solution. Not as cheap initially, but worth it if you're doing lots of cool/cold weather riding!
Something with a waterproof and breathable membrane (like Gore Tex) is likely a better long term solution. Not as cheap initially, but worth it if you're doing lots of cool/cold weather riding!
#14
Junior Member
Join Date: Jan 2016
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I work in an operating room and occasionally take sterile gloves home for just this purpose. We have lots of sizes available so I go for size 9 (for those people with huge hands).....I wear them over a pair of those coated freezer gloves when its cold and there is heavy rainfall on my 10 mile commute. My hands are pretty much dry when I get home, much, much dryer than with bike specific ‘waterproof ‘ gloves.
Thread
Thread Starter
Forum
Replies
Last Post
RandomTroll
General Cycling Discussion
7
06-29-16 06:58 PM
WonderMonkey
General Cycling Discussion
23
11-06-15 07:03 AM