Rummage Sale Super Course
#26
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Looks like a 72. Same as me, but I’m not as greasy.
When I’d posted earlier on the SC thread, Daka had straightened me out on seatpost size. This was the way the 26.2 Promax looked when I pulled it out.
it seemed counter-intuitive to me that it actually needed a larger seatpost, but he suggested that someone had just distorted the collar. A little prying and filing with a 1” radius file, and a 26.4 went in. This is the post from my 87 Hardrock, which I had to replace because it was a bit short. Nothing fancy, but it’s got a pretty nice finish on it.
When I’d posted earlier on the SC thread, Daka had straightened me out on seatpost size. This was the way the 26.2 Promax looked when I pulled it out.
it seemed counter-intuitive to me that it actually needed a larger seatpost, but he suggested that someone had just distorted the collar. A little prying and filing with a 1” radius file, and a 26.4 went in. This is the post from my 87 Hardrock, which I had to replace because it was a bit short. Nothing fancy, but it’s got a pretty nice finish on it.
#27
Senior Member
Join Date: Jun 2006
Posts: 20,315
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3447 Post(s)
Liked 2,786 Times
in
1,967 Posts
Many of those pumps had alternate hoses with a fitting that would screw on to a presta end but really designed for a Westwood valve.
Even if you found one the integrity would be suspect now.
Might be possible to use one with a valve adapter. Never tried.
Even if you found one the integrity would be suspect now.
Might be possible to use one with a valve adapter. Never tried.
#28
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Time for some Lugshots!
Not sure how these rank on the Raleigh Meter. This cable guide almost looks like it was meant for a front derailleur.
A little off-center, but at least it’s there.
Not sure how these rank on the Raleigh Meter. This cable guide almost looks like it was meant for a front derailleur.
A little off-center, but at least it’s there.
#29
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Now for some fork details!
First I had to struggle with the headset, which had bizarre wrench sizing. 1 5/8”? Geeze, time for a larger crescent wrench.
48 loose ball bearings. Races looked good, but still not very smooth when it went back together.
I love this little nail holding the crown to the steerer. It even got a chrome coating on its backside.
Found this bit of tape in the headtube. Looks like it was on the steerer at some point.
The blue on the steerer looks much darker than the blue undercoating on the frame.
Interesting old beast!
First I had to struggle with the headset, which had bizarre wrench sizing. 1 5/8”? Geeze, time for a larger crescent wrench.
48 loose ball bearings. Races looked good, but still not very smooth when it went back together.
I love this little nail holding the crown to the steerer. It even got a chrome coating on its backside.
Found this bit of tape in the headtube. Looks like it was on the steerer at some point.
The blue on the steerer looks much darker than the blue undercoating on the frame.
Interesting old beast!
#30
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,277
Mentioned: 413 Post(s)
Tagged: 1 Thread(s)
Quoted: 3766 Post(s)
Liked 3,256 Times
in
2,124 Posts
-----
Congratulations!
you have the famous/notorious Raleigh 26TPI headset
prior to reassembly
a) use a file to cut yourself a keyway in the steerer so that a keyed headset washer can be fitted. this permits easier adjusting of the headset and better adjustment retention.
b) have the ends of the head tube and the fork crown milled.
these two steps will give you a better functioning headset with less grief/problems. it will not be glass smooth but it will be much better than if you do not do them.
-----
Congratulations!
you have the famous/notorious Raleigh 26TPI headset
prior to reassembly
a) use a file to cut yourself a keyway in the steerer so that a keyed headset washer can be fitted. this permits easier adjusting of the headset and better adjustment retention.
b) have the ends of the head tube and the fork crown milled.
these two steps will give you a better functioning headset with less grief/problems. it will not be glass smooth but it will be much better than if you do not do them.
-----
#31
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,758
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 925 Post(s)
Liked 2,809 Times
in
954 Posts
Lucky dog...
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#32
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
-----
Congratulations!
you have the famous/notorious Raleigh 26TPI headset
prior to reassembly
a) use a file to cut yourself a keyway in the steerer so that a keyed headset washer can be fitted. this permits easier adjusting of the headset and better adjustment retention.
b) have the ends of the head tube and the fork crown milled.
these two steps will give you a better functioning headset with less grief/problems. it will not be glass smooth but it will be much better than if you do not do them.
-----
Congratulations!
you have the famous/notorious Raleigh 26TPI headset
prior to reassembly
a) use a file to cut yourself a keyway in the steerer so that a keyed headset washer can be fitted. this permits easier adjusting of the headset and better adjustment retention.
b) have the ends of the head tube and the fork crown milled.
these two steps will give you a better functioning headset with less grief/problems. it will not be glass smooth but it will be much better than if you do not do them.
-----
#33
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,639
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 507 Post(s)
Tagged: 0 Thread(s)
Quoted: 7251 Post(s)
Liked 2,322 Times
in
1,357 Posts
The Raleigh headset isn't bad. It's not super smooth or precise, but it's extremely durable. I think you can probably get replacement parts easily enough since Raleighs are so common. Just assume you'll never replace it and take care of it.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#34
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Good news. Yeah, that’s the plan. I also just read that you can install a lower race from any headset, if you want a seal and caged bearings. Not sure how that affects stack height. I’m going to put it together for now, and see how the bike fits me. At least I got standard bb threading and a good bottom bracket!
#35
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,277
Mentioned: 413 Post(s)
Tagged: 1 Thread(s)
Quoted: 3766 Post(s)
Liked 3,256 Times
in
2,124 Posts
-----
You found the headset locknut and adjustable race to be of odd dimension because they are................................................yes, you guessed it...........Whitworth.
The cycle's Gripfast seat binder is also Whitworth and were the wedgebolts used on the original chainset.
-----
You found the headset locknut and adjustable race to be of odd dimension because they are................................................yes, you guessed it...........Whitworth.
The cycle's Gripfast seat binder is also Whitworth and were the wedgebolts used on the original chainset.
-----
#36
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
-----
You found the headset locknut and adjustable race to be of odd dimension because they are................................................yes, you guessed it...........Whitworth.
The cycle's Gripfast seat binder is also Whitworth and were the wedgebolts used on the original chainset.
-----
You found the headset locknut and adjustable race to be of odd dimension because they are................................................yes, you guessed it...........Whitworth.
The cycle's Gripfast seat binder is also Whitworth and were the wedgebolts used on the original chainset.
-----
I wouldn’t have thought to try it on my headset, but there it is!
Whitworth! I read up on that stuff at the time, and it was interesting. First time a “standard” had been set. You’d think the Germans would have thought of it first. I also love that the bolt sizes were called out by the size of wrench that would fit the head. User friendly.
#37
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,277
Mentioned: 413 Post(s)
Tagged: 1 Thread(s)
Quoted: 3766 Post(s)
Liked 3,256 Times
in
2,124 Posts
-----
"Verily, Don Roberto ist thine oncle!"
-----
"Verily, Don Roberto ist thine oncle!"
-----
Likes For juvela:
#38
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,758
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 925 Post(s)
Liked 2,809 Times
in
954 Posts
Thanks for confirming that. I’d read about that issue, and the locknut was so weird, I figured I had won the lottery, the bad lottery. At least the races look good, so if I follow you prescriptions, I should be good. The steerer has a flat spot where the keyway should be, so I guess that’s the spot I cut a channel in.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#39
Senior Member
I lived in WLA for a long time GRanite exchange... the 47 numbers... when General Telephone ruled. They bet big on electromechanical Switching then touch tone arrived and you could get a touch tone but the central switching had to convert that to pulse!
Charlie worked for Hans Ohrt for a while- then bought Sugden & Lynch and renamed it C Harding’s Westwood Cyclery
another shop opened five blocks or so south on the other side of the street- they sold Peugeot and another brand.
charlie sold Raleigh, Phillips, Carlton, Legnano, Hetchins, holdsworth. My first bike, a Phillips Pilot was from there.
Charlie worked for Hans Ohrt for a while- then bought Sugden & Lynch and renamed it C Harding’s Westwood Cyclery
another shop opened five blocks or so south on the other side of the street- they sold Peugeot and another brand.
charlie sold Raleigh, Phillips, Carlton, Legnano, Hetchins, holdsworth. My first bike, a Phillips Pilot was from there.
Likes For daka:
#40
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,639
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 507 Post(s)
Tagged: 0 Thread(s)
Quoted: 7251 Post(s)
Liked 2,322 Times
in
1,357 Posts
Good news. Yeah, that’s the plan. I also just read that you can install a lower race from any headset, if you want a seal and caged bearings. Not sure how that affects stack height. I’m going to put it together for now, and see how the bike fits me. At least I got standard bb threading and a good bottom bracket!
My 1971 Super Course is the same. Standard thread BB and Whitworth headset. If the headset ever wears out, I'll know what to do.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#42
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
I never thought of that, and it's brilliant. The lower race is the more critical one, and it often wears out when the upper one is still like new.
My 1971 Super Course is the same. Standard thread BB and Whitworth headset. If the headset ever wears out, I'll know what to do.
My 1971 Super Course is the same. Standard thread BB and Whitworth headset. If the headset ever wears out, I'll know what to do.
#43
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
I noticed they came in two thicknesses: 5mm and 10mm. I didn’t measure anything, but seems like it would be hard to fit even the 5mm with the brake cable hanger.
#44
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,758
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 925 Post(s)
Liked 2,809 Times
in
954 Posts
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#45
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,488
Bikes: https://www.theheadbadge.com
Mentioned: 121 Post(s)
Tagged: 0 Thread(s)
Quoted: 2396 Post(s)
Liked 4,338 Times
in
2,071 Posts
Likes For cudak888:
#46
Senior Member
Mix and match according to how much threaded portion is available on the steerer tube. The brake hanger counts as a washer too - having a spacer underneath it makes it easier to adjust the top race but, if you don't have enough threads, you can leave the spacer out - it just makes the headset less convenient to adjust since you have to unthread the locknut back far enough to lift the hanger in order get a tool on the upper race. Though, in my experience, hand-tight is usually plenty, since the locknut compresses things further.
#47
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
The spacer on mine is almost 3mm thick. With the brake hanger over it I’ve got 5mm of threads left.
Here’s a 5mm threadless spacer, and bracket over it.
I dunno. Seems a little skimpy. Sorry about the thumbnail.
Here’s a 5mm threadless spacer, and bracket over it.
I dunno. Seems a little skimpy. Sorry about the thumbnail.
#48
Senior Member
I agree, with the 5mm spacer there are only a couple of threads available. I'd go with the 3mm spacer. If you were going to convert to brakes that don't require the hanger, then the 5mm would be correct.
#49
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,758
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 925 Post(s)
Liked 2,809 Times
in
954 Posts
Yup, that's tight.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#50
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 900
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Weinmann rim, no name hub, sunrace ramped freewheel, bummer of a quick release. Races are badly pitted, two nds spokes had already been replaced with DT’s, and a third was broken. Freewheel feels really loose. By some miracle, I had two spokes laying around, and one of them fit.