Pedal Re-build Question
#1
Member
Thread Starter
Pedal Re-build Question
The Wellgo M141A pedal on my 2013 Trek started making a clicking noise the other day.
Naturally without doing any research, I removed the pedal and immediately the dust seal on the inside of the pedal closest to the crank arm broke (more like crumbled) in half. I continued with the disassembly and removed the spindle only to find a fair amount of grit inside the bearing race. After cleaning the bearing race out, I noticed there was no scoring or surface damage...the races passed visual inspection.
Now that I can reassemble the pedal...does anybody have any tips on where to find bearing "seals"?
I know most people are going to say "Just toss 'em and buy a new pair", but I like these pedals....they're anodized aluminum and match the bike really well.
Thanks
Naturally without doing any research, I removed the pedal and immediately the dust seal on the inside of the pedal closest to the crank arm broke (more like crumbled) in half. I continued with the disassembly and removed the spindle only to find a fair amount of grit inside the bearing race. After cleaning the bearing race out, I noticed there was no scoring or surface damage...the races passed visual inspection.
Now that I can reassemble the pedal...does anybody have any tips on where to find bearing "seals"?
I know most people are going to say "Just toss 'em and buy a new pair", but I like these pedals....they're anodized aluminum and match the bike really well.
Thanks
#2
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,291
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,910 Times
in
1,884 Posts
the pedals I've ever dealt with [that could be "serviced"] ended up in the trash.
The bearing assembly tends to cost enough to not make sense in committing to the service. The seals were never found a la carte when needed. Cheaper to buy new & move forward. Buy a few pairs next time you order your favorite "ones". Personally, I like to try out different designs of pedals.
The bearing assembly tends to cost enough to not make sense in committing to the service. The seals were never found a la carte when needed. Cheaper to buy new & move forward. Buy a few pairs next time you order your favorite "ones". Personally, I like to try out different designs of pedals.
__________________
-Oh Hey!
-Oh Hey!
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,003
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4172 Post(s)
Liked 3,793 Times
in
2,272 Posts
Agree with Troul but for the trying different pedals part. get a spare or three. And do the rebuild far sooner on the replacement pair next time. Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Senior Member
Join Date: Sep 2017
Posts: 7,768
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 6882 Post(s)
Liked 10,875 Times
in
4,639 Posts
If you really want to keep these pedals, just put 'em back together with as much thick grease as you can stuff into them. They'll last a while.
#5
Senior Member
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,457
Bikes: 2013 Custom SA5w / Rohloff Tourster
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 314 Times
in
241 Posts
It's amazing these original pedals lasted that far, with or without service. Would a plumbing O ring do? Or is the broken piece part of a bushing? If not just put them back together and try them.
I have V Sixty platform pedals that went 30,000 miles with once or twice yearly lubing. One side sealed bearing. They don't even have a separate O ring.
I have V Sixty platform pedals that went 30,000 miles with once or twice yearly lubing. One side sealed bearing. They don't even have a separate O ring.
#6
Member
Thread Starter
It's amazing these original pedals lasted that far, with or without service. Would a plumbing O ring do? Or is the broken piece part of a bushing? If not just put them back together and try them.
I have V Sixty platform pedals that went 30,000 miles with once or twice yearly lubing. One side sealed bearing. They don't even have a separate O ring.
I have V Sixty platform pedals that went 30,000 miles with once or twice yearly lubing. One side sealed bearing. They don't even have a separate O ring.
#7
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,936
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3571 Post(s)
Liked 3,368 Times
in
1,916 Posts
An O-ring might work as a seal replacement. Some older pedals from e.g. Zeus and Campagnolo used O-ring seals on pedals, but the axle had a groove to hold the ring in place. Without such retention, the ring might not stay in place well. But O-rings are cheap enough that it ought to be worth a try.
#8
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,651
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 835 Post(s)
Liked 1,056 Times
in
741 Posts
Yes, worth a try. OP just has to make sure it's the correct type of rubber which, I think, most plumbing o-rings sold at hardware stores are. Nitrile (Buna N) is what is most common and works well. Stay away from EPDM though as it's not made for petroleum greases and is used in some plumbing applications. Chart here. https://www.applerubber.com/products/o-rings/
#9
Member
Thread Starter
Yes, worth a try. OP just has to make sure it's the correct type of rubber which, I think, most plumbing o-rings sold at hardware stores are. Nitrile (Buna N) is what is most common and works well. Stay away from EPDM though as it's not made for petroleum greases and is used in some plumbing applications. Chart here. https://www.applerubber.com/products/o-rings/