Possible PNX-10 purchase.
#1
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,250
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,287 Times
in
610 Posts
Possible PNX-10 purchase.
With any luck I'm going to look at what I believe to be an '81 Peugeot PNX-10 Super Competition on Saturday if it's still there. It's an hour and a half one way and I have something going on every night this week or I'd go after work. I know little to nothing about Peugeot except they're French. Is there anything I need to watch for? From the pics it hasn't had much TLC for awhile but it is complete and looks to be all original with the exception of bar tape. The pictures aren't the best but when I asked for better pics of the drivetrain the seller just sent me the same pics and said "come see it". I think he's a bit high on his asking price but he did state in the ad that it needed work so maybe he will negotiate realistically. Anyway, here it is and the page from the '81 catalog. The chainstays look pretty beat up, I'm hoping that's grease or road tar not scraped off paint.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#2
Senior Member
Join Date: Mar 2012
Location: Niagara Region, Canada
Posts: 1,455
Bikes: 1970s Alex Singer, 1960s Peugeot PX 10, 1960s Bertin C37, 1973 Carre Bertin C 37, 1972 Carlton Kermesse, 1981 Peugeot PX 14 Super Competition
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 346 Post(s)
Liked 266 Times
in
157 Posts
Murray Missile-
They are very nice bikes. Very quick, agile handling with quite good workmanship and that lovely, pearlescent white paint. The Ideale 2002 plastic saddle is an instrument of torture and should be immediately be sold to some naive bike restorer. Could be all English threaded but it's right in the transition period so check everything for French threads just to be safe.
They are very nice bikes. Very quick, agile handling with quite good workmanship and that lovely, pearlescent white paint. The Ideale 2002 plastic saddle is an instrument of torture and should be immediately be sold to some naive bike restorer. Could be all English threaded but it's right in the transition period so check everything for French threads just to be safe.
Likes For bertinjim:
#3
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3888 Post(s)
Liked 6,487 Times
in
3,211 Posts
Looks pretty good. I usually know what's "in the money" before I look at a bike, so if anything pops up later (botched pedal, etc.), I'll be covered if I need to replace something or part it out to cover cost. I used to check for stuck seatposts and stems, but I don't even do that anymore unless I see a ton of rust and slammed quills. One thing I always do now is run my hand over the frame looking for dents and dings. They can be anywhere. The worst damage can be bulges right behind the head tube on both top and down tubes, so that's where I start. I still don't test ride any of them...
Likes For SurferRosa:
#4
Senior Member
Join Date: Mar 2015
Location: New Zealand
Posts: 1,053
Bikes: Gunnar, Shogun, Concorde, F Moser, Pete Tansley, Rocky Mtn, Diamant, Krapf, Marin, Avanti, Winora, Emmelle, Ken Evans
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 275 Post(s)
Liked 417 Times
in
218 Posts
no advice but i reckon that is a gorgeous bike
Likes For Soody:
#5
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26422 Post(s)
Liked 10,380 Times
in
7,208 Posts
...these 80's PX Super Comp's are nice bikes. As already stated, tighter and quicker than than the 70's decade, and the components are better. Not as much to replace if you want to ride it hard. They do dance around a little bit in situations like bumps or light rail tracks. On mine, it's not unusual to feel it sort of jump sideways a little sometimes in the back. But that's the nice springy road feel you want to absorb shock, so if you're not some "stiff bike so I don't lose any energy" compulsive, you'll probably enjoy it.
If you need to match the paint, It's most easily done in a two step process. first the closest white you can find (usually a shell white or a French white), then a pearlescent transparent over that. Testors sells one called "White Lightning."
If you need to match the paint, It's most easily done in a two step process. first the closest white you can find (usually a shell white or a French white), then a pearlescent transparent over that. Testors sells one called "White Lightning."
Likes For 3alarmer:
#6
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,385 Times
in
3,670 Posts
Murray Missile
I would not drive an hour and a half, 100mi? without pics that you asked for, the seller knows you will be more invested once you drive all that way.
They obviously want you at a disadvantage, once you get there and see something a pic could have shown, they can say "you should have asked about that", I would sweat them out a bit more and tell them you're not coming without more pics. Just denying them is a huge red flag for me, with a high ask as well, this seller thinks they have the upper hand so this is not a amiable situation on top of the travel disparity.
All that being said, I am a fan of these but this seller is not on the up and up.
I would not drive an hour and a half, 100mi? without pics that you asked for, the seller knows you will be more invested once you drive all that way.
They obviously want you at a disadvantage, once you get there and see something a pic could have shown, they can say "you should have asked about that", I would sweat them out a bit more and tell them you're not coming without more pics. Just denying them is a huge red flag for me, with a high ask as well, this seller thinks they have the upper hand so this is not a amiable situation on top of the travel disparity.
All that being said, I am a fan of these but this seller is not on the up and up.
Likes For merziac:
#7
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,250
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,287 Times
in
610 Posts
That is great to know!
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#8
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,250
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,287 Times
in
610 Posts
Murray Missile
I would not drive an hour and a half, 100mi? without pics that you asked for, the seller knows you will be more invested once you drive all that way.
They obviously want you at a disadvantage, once you get there and see something a pic could have shown, they can say "you should have asked about that", I would sweat them out a bit more and tell them you're not coming without more pics. Just denying them is a huge red flag for me, with a high ask as well, this seller thinks they have the upper hand so this is not a amiable situation on top of the travel disparity.
All that being said, I am a fan of these but this seller is not on the up and up.
I would not drive an hour and a half, 100mi? without pics that you asked for, the seller knows you will be more invested once you drive all that way.
They obviously want you at a disadvantage, once you get there and see something a pic could have shown, they can say "you should have asked about that", I would sweat them out a bit more and tell them you're not coming without more pics. Just denying them is a huge red flag for me, with a high ask as well, this seller thinks they have the upper hand so this is not a amiable situation on top of the travel disparity.
All that being said, I am a fan of these but this seller is not on the up and up.
About 20 bikes ago he might have had an advantage on distance but not now. I've driven farther than that and came home empty handed over a $50 difference. I've also used the drive distance to my advantage, especially on something that's been listed more than a week or so. Money talks, a buyer with cash in hand standing in your driveway carries more weight than some tire kicker on the internet. I'm sure if it's still there and I do get a shot it's going to be am interesting negotiation. Like I said, long drive or not I WILL leave without it if he's too hard nosed. I'm Scots-Irish, that's how we roll...... "deep pockets and short arms"
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#9
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
I have a 1979 that I built up after repainting the frame. I was actually doing that one so I could experiment with materials and methods to be better prepared to paint the 1971 Jeunet that I'm doing right now. It turned out that the Peugeot is a fine riding bike, especially with sew-ups. Really, really great and beyond all of my expectations. It's one of my favorites to ride.
On the one shown, what's the seller's price? Also, it is a tall frame, so the number of buyers is more limited, good for you.
On the one shown, what's the seller's price? Also, it is a tall frame, so the number of buyers is more limited, good for you.
Likes For Phil_gretz:
#10
Senior Member
Join Date: Aug 2015
Posts: 3,302
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1143 Post(s)
Liked 1,740 Times
in
961 Posts
Murray Missile-
They are very nice bikes. Very quick, agile handling with quite good workmanship and that lovely, pearlescent white paint. The Ideale 2002 plastic saddle is an instrument of torture and should be immediately be sold to some naive bike restorer. Could be all English threaded but it's right in the transition period so check everything for French threads just to be safe.
They are very nice bikes. Very quick, agile handling with quite good workmanship and that lovely, pearlescent white paint. The Ideale 2002 plastic saddle is an instrument of torture and should be immediately be sold to some naive bike restorer. Could be all English threaded but it's right in the transition period so check everything for French threads just to be safe.
Likes For Mr. 66:
#11
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,250
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,287 Times
in
610 Posts
I rather not say at the moment. He's not insanely high, just a bit more than myself and a "trusted consultant" feel is appropriate given it's current state. It may still be there because he won't deal but more likely because of the condition in the pictures. I think my chances of bringing it home at a fair price are better than good though.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#13
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,250
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,287 Times
in
610 Posts
Did some more digging and it looks like the guy is a flipper but mostly cars, motorcycles, furniture and BSO's. That explains a lot and now I can pick it apart with a clear conscience.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#14
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
I had and rode an '82 for a while. Nice bike, and my rear even liked the Ideale 2001 saddle.
The only issue I really didn't catch up front was that one of the plastic surrounds on a brake lever cable adjuster was cracked.
Pic of mine. It had its share of little paint imperfections and touches of rust, but overall a nice ride, if a little smaller than my usual.
The only issue I really didn't catch up front was that one of the plastic surrounds on a brake lever cable adjuster was cracked.
Pic of mine. It had its share of little paint imperfections and touches of rust, but overall a nice ride, if a little smaller than my usual.
Last edited by Ex Pres; 10-14-20 at 12:25 PM.
Likes For Ex Pres:
#15
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
The 80s PXN 10 series are fine bikes and in some ways "better" than the 70s PX 10s. The parts as 3alarmer said are top notch (atom 700 hubs, spidel brakes, stronglight 106 crank, good bar and stem (atax philippe), and good derailleurs. In fact that rear derailleur can handle 30 teeth no problem. Also at least on my '82, the hubs are english threaded. I'm reasonably confident that the BB and HS are french threaded. Also this generation simplex drop out is better than the earlier ones because you can run a campy style RD if you want (it is threaded and there is a stop).
This is my '82 with a 6 speed 13-30 new winner freewheel:
This is my '82 with a 6 speed 13-30 new winner freewheel:
Likes For bikemig:
#16
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,326 Times
in
837 Posts
Murray Missile-
They are very nice bikes. Very quick, agile handling with quite good workmanship and that lovely, pearlescent white paint. The Ideale 2002 plastic saddle is an instrument of torture and should be immediately be sold to some naive bike restorer. Could be all English threaded but it's right in the transition period so check everything for French threads just to be safe.
They are very nice bikes. Very quick, agile handling with quite good workmanship and that lovely, pearlescent white paint. The Ideale 2002 plastic saddle is an instrument of torture and should be immediately be sold to some naive bike restorer. Could be all English threaded but it's right in the transition period so check everything for French threads just to be safe.
For what it's worth, here are my observations regarding my 1980 PKN-10:
1) BB threading is Swiss;
2) ride quality is superb;
3) craftsmanship is sub-par, compared with my same-vintage Bianchi, with braze splatter, a rear dropout brazing void, and paint that has not withstood the test of time;
4) versatile frame geometry easily accommodates 32mm tires
5) these frames run a bit long in the top tube, which was the main reason I gave mine to my son (it is 2cm too tall for me, but the "extra" 2cm of top tube length was a greater concern);
Erik and Henry waiting for their dad to give them a ride. My son is grateful for my triple chainring conversion, which provides a 35 gear-inch low.
6) bottom line: a PXN-10 of that vintage would be a delight, assuming it is in good shape and your size
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#17
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,250
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,287 Times
in
610 Posts
Been there ... done that / almost.
For what it's worth, here are my observations regarding my 1980 PKN-10:
1) BB threading is Swiss;
2) ride quality is superb;
3) craftsmanship is sub-par, compared with my same-vintage Bianchi, with braze splatter, a rear dropout brazing void, and paint that has not withstood the test of time;
4) versatile frame geometry easily accommodates 32mm tires
5) these frames run a bit long in the top tube, which was the main reason I gave mine to my son (it is 2cm too tall for me, but the "extra" 2cm of top tube length was a greater concern);
Erik and Henry waiting for their dad to give them a ride. My son is grateful for my triple chainring conversion, which provides a 35 gear-inch low.
6) bottom line: a PXN-10 of that vintage would be a delight, assuming it is in good shape and your size
For what it's worth, here are my observations regarding my 1980 PKN-10:
1) BB threading is Swiss;
2) ride quality is superb;
3) craftsmanship is sub-par, compared with my same-vintage Bianchi, with braze splatter, a rear dropout brazing void, and paint that has not withstood the test of time;
4) versatile frame geometry easily accommodates 32mm tires
5) these frames run a bit long in the top tube, which was the main reason I gave mine to my son (it is 2cm too tall for me, but the "extra" 2cm of top tube length was a greater concern);
Erik and Henry waiting for their dad to give them a ride. My son is grateful for my triple chainring conversion, which provides a 35 gear-inch low.
6) bottom line: a PXN-10 of that vintage would be a delight, assuming it is in good shape and your size
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#18
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,385 Times
in
3,670 Posts
Likes For merziac:
#19
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,385 Times
in
3,670 Posts
You could be right but I'm not getting that vibe. From his FB page I think he's bucks up and just doesn't want to bother. High dollar house, cars, motorcycle. He's not a "bike guy", probably bought it in college or shortly after for exercise, rode it awhile then parked it.
About 20 bikes ago he might have had an advantage on distance but not now. I've driven farther than that and came home empty handed over a $50 difference. I've also used the drive distance to my advantage, especially on something that's been listed more than a week or so. Money talks, a buyer with cash in hand standing in your driveway carries more weight than some tire kicker on the internet. I'm sure if it's still there and I do get a shot it's going to be am interesting negotiation. Like I said, long drive or not I WILL leave without it if he's too hard nosed. I'm Scots-Irish, that's how we roll...... "deep pockets and short arms"
About 20 bikes ago he might have had an advantage on distance but not now. I've driven farther than that and came home empty handed over a $50 difference. I've also used the drive distance to my advantage, especially on something that's been listed more than a week or so. Money talks, a buyer with cash in hand standing in your driveway carries more weight than some tire kicker on the internet. I'm sure if it's still there and I do get a shot it's going to be am interesting negotiation. Like I said, long drive or not I WILL leave without it if he's too hard nosed. I'm Scots-Irish, that's how we roll...... "deep pockets and short arms"
Likes For merziac:
#20
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,385 Times
in
3,670 Posts
Hopefully you can wind him up and drop him like a stone or grind him into a good deal, my expectations would be too grand to go there without more cooperation from him.
Likes For merziac:
#21
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,250
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,287 Times
in
610 Posts
No surprise there, still a dick tude about more pics, info, clearly thinks his time is worth more than ours IMO.
Hopefully you can wind him up and drop him like a stone or grind him into a good deal, my expectations would be too grand to go there without more cooperation from him.
Hopefully you can wind him up and drop him like a stone or grind him into a good deal, my expectations would be too grand to go there without more cooperation from him.
I'm not sure I'll even get that far on this deal now. Sent "Peugeot Man" a message yesterday that I might be able to make it Friday after work if he was available. His reply was "That might work." Nothing else. I'm beginning to wonder if it's worth the aggravation.
#22
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
Did anyone notice the mid-80s Fiero bonnet badge in the first photo? See what he wants for that...
#24
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,447
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4236 Post(s)
Liked 2,949 Times
in
1,808 Posts
Let us know if you pick it up (the Peugeot, not the Fiero).
Likes For himespau:
#25
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
I'd be interested to hear about either, or both, as a package deal for … $3750?
Likes For Phil_gretz: