Go Back  Bike Forums > Bike Forums > Fifty Plus (50+)
Reload this Page >

Saddle soreness of the third kind - sit bones

Notices
Fifty Plus (50+) Share the victories, challenges, successes and special concerns of bicyclists 50 and older. Especially useful for those entering or reentering bicycling.

Saddle soreness of the third kind - sit bones

Old 04-13-11, 05:07 PM
  #1  
KillerBeagle
Rabid Member
Thread Starter
 
KillerBeagle's Avatar
 
Join Date: Oct 2010
Location: Olympia, WA
Posts: 198

Bikes: 2006 Trek 2100, 1973 Crescent Mark XX, 196x Peugeot PX-10

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 1 Time in 1 Post
Saddle soreness of the third kind - sit bones

I know there are plenty of types of saddle soreness, such as that caused by friction and that caused by bacterial / dermatological issues. I've been blessed so far not to experience those (knock on wood), either in my college cycling career or in my renewed interest that started last fall.
Unfortunately, I've been suffering from persistent sore "sit bones" (you know the real name) this time around. I have tried several different saddles including at least one that's often recommended here (Fizik Aliante). The only way I can stay marginally comfortable is with an add-on gel pad over top of the saddle - and this even with pretty thick padding on my shorts (PI Elite and Pro).
My past experience, and what I've read on the forums here, is that with conditioning the muscles between the skin and the sit bones should develop and end this problem. However, I've been riding consistently (2-3 times per week, 15 -30 miles each ride) and things aren't really improving. My sit bone area ends up sore, to where sitting on hard chairs is somewhat uncomfortable, for a few days after a longer ride.
My position is fairly, but not very, upright - bars and saddle are about level and I usually ride on the hoods.
Any suggestions on how to get to where I can ride comfortably on a normal saddle without a gel pad and without soreness afterwards?
P.S. not interested in recumbents at this time
KillerBeagle is offline  
Old 04-13-11, 05:12 PM
  #2  
Phil85207
Century bound
 
Phil85207's Avatar
 
Join Date: Jan 2010
Location: Mesa Arizona
Posts: 2,262

Bikes: Felt AR4 and Cannondale hybrid

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 3 Times in 2 Posts
Have you had a "good" bike fit?
Phil85207 is offline  
Old 04-13-11, 05:18 PM
  #3  
Sculptor7
Senior Member
 
Join Date: Oct 2009
Location: New England
Posts: 1,001

Bikes: Trek 1.1

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 5 Times in 2 Posts
My own Trek 1 stock saddle is very hard. At first I thought I would not like it but after putting in over 4000 miles last year I find it is not so bad. What I do is periodically get up out of the saddle so circulation and new muscles come into play, Even just a minute or so seems to help. Keep thinking I am going to get a softer saddle but never get around to it. One thing I like is that, since it is hard, there is minimum contact and therefore minimum chafing. It does depend on the road surface too. A nice smooth road makes it all easier to bear. Lately the spring potholes and ruts are not that pleasant.
Sculptor7 is offline  
Old 04-13-11, 06:00 PM
  #4  
NealH
Senior Member
 
NealH's Avatar
 
Join Date: May 2003
Location: Triangle, NC
Posts: 1,480

Bikes: S-Works Tarmac

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 182 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
The Cobb V-Flow+ is the best I've found so far, though its still not the "perfect" saddle. My advice is to try one, as their return policy is the best in the industry. But everyone's milage will vary with saddles. No one fits all.


NealH is offline  
Old 04-13-11, 06:35 PM
  #5  
berner
Senior Member
 
Join Date: May 2010
Location: Bristol, R. I.
Posts: 4,340

Bikes: Specialized Secteur, old Peugeot

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 496 Times in 299 Posts
I began cycling about this time last year. My experience with saddle pain was much the same as yours until at long last finding one that worked for me for up to 50 miles so far. Another aspect of comfort is learning the best position in which to sit. There is an excellent thread on this on the Road Forum here. https://www.bikeforums.net/showthread...tion-Discovery I've begun to implement the concepts discussed with some immediate success. Read through and you may find useful ideas.
berner is offline  
Old 04-13-11, 07:28 PM
  #6  
horatio 
Hump, what hump?
 
horatio's Avatar
 
Join Date: Dec 2003
Location: SC midlands
Posts: 1,937

Bikes: See signature

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 227 Times in 145 Posts
Perhaps you need a different saddle width, and/or contour. I had similar issues until last fall, when I bought the Secteur. It came with a Specialized Riva 143mm saddle - nothing fancy by any means, but it's the most comfortable I've ever ridden. I, too, had sit bone soreness after long (2+ hour rides), even in the beginning with this saddle, but now I can ride about four hours without significant discomfort. For me, I think getting comfortable was a matter of finding the right shape and width for my anatomy, then getting accustomed to that. I have a 143mm Alias on my Trek, but it's flat at the widest part, whereas the Riva is more rounded. The Alias is not as comfortable after 2+ hours. I also find I'm sitting further back on the saddle now, which places the sit bones in an area where there is more support. Unless you have a Brooks leather saddle, you're breaking in your rear end, not the saddle. LOL Finding the perfect saddle can be a lieflong quest, if you believe some of the posts you read here. Once you find the perfect mate for your posterior, stock up!
__________________
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports


horatio is offline  
Old 04-14-11, 03:29 AM
  #7  
cyclinfool
gone ride'n
 
cyclinfool's Avatar
 
Join Date: Aug 2007
Location: Upstate NY
Posts: 4,050

Bikes: Simoncini, Gary Fisher, Specialized Tarmac

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
bike fit could be the issue, since you are sitting more upright you will need to find a saddle that fits well.
cyclinfool is offline  
Old 04-14-11, 04:05 AM
  #8  
late
Senior Member
 
late's Avatar
 
Join Date: Oct 2002
Location: Southern Maine
Posts: 8,938
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 12172 Post(s)
Liked 1,483 Times in 1,096 Posts
Originally Posted by KillerBeagle

My position is fairly, but not very, upright - bars and saddle are about level and I usually ride on the hoods.
Brooks B17.

Narrow saddles are for a more aggressive riding position.
You have the traditional position, and the traditional saddle will work.

Gel pads should go back to the Hell they came from.

You have some choices....

My usual advice is to get the B17 Special. It's worth the extra dough.

However, they have one with anatomic cutouts now, called the B17 Imperial.
I have one, haven't tried it yet.

And then there is the Brooks Flyer, which is a B17 with springs.
That take some getting used to, but it will definitely take some stress off the sit bones.
I've used one. It's on an old bike I gave Sis. She likes it.

After a while I realised I didn't need it, and on rides lasting a few hours the slight bit
of extra energy that gets wasted made me tired faster. YMMV.

The B17 needs to sit slightly more forward than usual, and slightly tilted up.
A good bike shop will place it correctly. There is also a break in period.

But it's the most popular saddle in history for a reason.
One of the shorts I use with it has no padding at all. The chamois
is three layers of fabric, with the middle layer being super slippery.
I prefer the new style pads in expensive shorts, but I have done
60-70 mile days using it. IOW, with no padding at all.
late is online now  
Old 04-14-11, 06:12 AM
  #9  
BlazingPedals
Senior Member
 
BlazingPedals's Avatar
 
Join Date: Dec 2004
Location: Middle of da Mitten
Posts: 12,474

Bikes: Trek 7500, RANS V-Rex, Optima Baron, Velokraft NoCom, M-5 Carbon Highracer, Catrike Speed

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1511 Post(s)
Liked 733 Times in 454 Posts
I can't offer any suggestions, but I can commiserate. I never did find a saddle that was nice to my butt, although I toughened up to the point I could do 50-milers without getting *too* sore.
BlazingPedals is offline  
Old 04-14-11, 06:42 AM
  #10  
freedomrider1
Senior Member
 
Join Date: Aug 2010
Location: N.W.Ohio
Posts: 1,205
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Liked 0 Times in 0 Posts
Just a guess, maybe back your mileage down for a couple of weeks and let things settle down,heal up,even a few days off. Then go easy.And increase mileage from there.
freedomrider1 is offline  
Old 04-14-11, 07:21 AM
  #11  
RonH
Life is good
 
RonH's Avatar
 
Join Date: Jan 2001
Location: Not far from the Withlacoochee Trail. 🚴🏻
Posts: 18,209

Bikes: 2018 Lynskey Helix Pro

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Likes: 0
Liked 10 Times in 10 Posts
What shorts are you wearing?
__________________
The Lord is merciful and gracious, slow to anger and abounding in steadfast love. - Psalm 103:8

I am a cyclist. I am not the fastest or the fittest. But I will get to where I'm going with a smile on my face.
RonH is offline  
Old 04-14-11, 08:13 AM
  #12  
NOS88
Senior Member
 
NOS88's Avatar
 
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times in 2 Posts
Recommending specific saddles will guarantee one thing - a boost in the economy as you spend lots of money trying one saddle after another. I think it best to approach this from a different angle. First, an upright position will place more weight on your sit bones. Now the question becomes, "Is the saddle is wide enough to allow you sit bones to be on the right place on the saddle?" All saddles are designed with an ideal region where the sit bones should meet the saddle. So, where and how do your sit bones now rest on the saddle? This is something I would want to know so I could compare it with other saddle widths and contours. Second, I would think about the firmness of the saddle. As you probably know a firm saddle allows that sit bones to perch on top. A softer saddle allows the sit bones to sink into the saddle, often creating a different kind of pressure on the sit bones and areas around it. As back-wards as it seems a softer saddle can often cause more sit bone soreness than a firmer one. If it were me, I'd make a trip to a shop with one of the devices to measure just how wide your sit bones are. I'd then take this measurement and see where this places my sit bones on my current saddle. If they are in the center of the intended area, I'd then look at density. If they are not, I'd adjust saddle width accordingly. Unfortunately, IMO, it is a trail and error process with density. It took me a long while to find out that very subtle differences in density make a big difference in comfort. For example, two saddle I like and use seem to work best in different situations. I have the Selle Italia SLK Gel saddle (even with the gel it is fairly firm, because the gel is very, very thin). On some days this saddle is a bear the first 10 minutes of a ride. It feel uncomfortably hard. Yet, on rides over three hours it is my saddle of choice. I also use a Koobi Xenon and it's great up until about two hours. It's slightly softer than the SLK and after two hours my sit bones just aren't as happy on this saddle.

I hope this question isn't offensive, but what are you sitting on hard surfaces after a ride where you sit bones end up being sore? I'd sure work to avoid complicating the situation by not allowing recovery. I would think that sitting on hard chairs is not the best way to facilitate recovery, but I could be wrong on this.


Ah, what the heck. I'll show you how weird the whole saddle thing can be. Below are the five saddles that I currently have in use and with which I have no problem. If there's a discernable pattern I don't know what it is.
Attached Images
File Type: jpg
zselliaitalliaslk.jpg (5.7 KB, 80 views)
File Type: jpg
zspecializedtoupe.jpg (10.4 KB, 79 views)
File Type: jpg
zspecializedalias.jpg (12.3 KB, 77 views)
File Type: jpg
zkoobie xenon.jpg (6.4 KB, 81 views)
File Type: jpg
zselle anatomica.jpg (9.9 KB, 79 views)
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831

Last edited by NOS88; 04-14-11 at 03:18 PM.
NOS88 is offline  
Old 04-14-11, 08:56 AM
  #13  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times in 313 Posts
My '85 Trek 460 has a shock absorbing "System 1" seat that is fairly narrow and not too thick. It's great on the rump, really. For the tailbone pain I usually do what was already suggested in standing up periodically. On downhills I'll stretch back a little and then reposition back into "the groove" when resuming the cadence/pace. I can do 25mi in the saddle without a break by doing this, though when it comes time for that break things are bit uncomfortable back there. And that is the nature of biking in my world.
OldsCOOL is offline  
Old 04-14-11, 09:00 AM
  #14  
TromboneAl
Senior Member
 
TromboneAl's Avatar
 
Join Date: Jun 2008
Location: Far, Far Northern California
Posts: 2,873

Bikes: 1997 Specialized M2Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Checkout this thread if you haven't already:

https://www.bikeforums.net/showthread...tion-Discovery

I discovered that part of my pain was surface pain, although I thought it was sit-bone pain. Using better bike shorts pretty much fixed it.
TromboneAl is offline  
Old 04-14-11, 09:56 AM
  #15  
stapfam
Time for a change.
 
stapfam's Avatar
 
Join Date: Jan 2004
Location: 6 miles inland from the coast of Sussex, in the South East of England
Posts: 19,913

Bikes: Dale MT2000. Bianchi FS920 Kona Explosif. Giant TCR C. Boreas Ignis. Pinarello Fp Uno.

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Take it that you have given enough time for the butt to harden but saddle fit is critical. First of all is saddle width and the buttometer at Specialised dealers can help on this. Wide comfy saddles are fine for a few miles but in general a firmer saddle is required. Not the rock hard ones but just a bit of cuchioning by foam or gel as in the Flite Gel Max saddles do help.

Next is saddle position in relation to height and fore and aft. This does take a bit of adjustment to get right and a friendly LBS to advise will help.

Then there is saddle tilt. I normally start with the saddle level to the ground and adjust from there. I like to get it so that I am taking the weight on the sit bones which should be on the wings of the saddle. Then adjust tilt so that I can just feel the saddle on the pubic bone. Then ride. If It still hurts the pubic bone then tilt the nose downwards. If I am sliding forward on the saddle them adjust the nose upwards.

Can take a fair time to get right but if the butt cannot get comfortable then it is down to trying new saddles---In the plural. For some of us it takes a long time to find the comfy saddle for a 100 miler.
__________________
How long was I in the army? Five foot seven.


Spike Milligan
stapfam is offline  
Old 04-14-11, 11:13 AM
  #16  
az_cyclist
Senior Member
 
az_cyclist's Avatar
 
Join Date: Jun 2007
Location: Arizona
Posts: 1,960

Bikes: Trek Domane 4.5, Trek 1500

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 1 Time in 1 Post
The Bontrager saddle that came with my 2006 Trek 1500 was fine. When I needed to replace it, I tried a Selle Italia gel, but my sit bones became extremely sore after about 75 miles. I switched to a men's Terry Liberator Y, and was happy with it from the start.

Last edited by az_cyclist; 04-15-11 at 09:09 AM.
az_cyclist is offline  
Old 04-14-11, 07:13 PM
  #17  
ModeratedUser150120149
Senior Member
 
Join Date: May 2008
Posts: 2,712
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Well, I am a relative newbie also. My first summer of serious riding was last summer. I say that to encourage you to take in all you read but to not concentrate too much on specific saddles. They seem to make a difference once you get toughened up but not before.

However, in the midst of all my pain I discovered one thing that no one had mentioned. My problem was not the saddle. As I said a butt will adapt to a lot of different saddles. It was chafing. Once I started putting something on my butt my comfort level went up markedly. I put it right on the area behind the scrotum and following the medial portion of the glutes around to the tail bone. In other words the exact areas that make contact with the saddle. I use Vaseline Lip Therapy.

So far this year my longest ride has been just shy of 40 miles and no pain (in the butt that is). The legs are another matter.

Also, keep in mind that different body types lend themselves to different sports. It may be your body (butt) type is such you may never get over the pain. I know some people like that. They just have to limit their miles or accept the pain.
ModeratedUser150120149 is offline  
Old 04-14-11, 08:48 PM
  #18  
scwowgph
Newbie
 
Join Date: Aug 2008
Location: Peru, IN
Posts: 43
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
selle anatomica saved my butt
scwowgph is offline  
Old 04-14-11, 10:14 PM
  #19  
B. Carfree
Senior Member
 
Join Date: Jan 2010
Location: Eugene, Oregon
Posts: 7,048
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 509 Post(s)
Likes: 0
Liked 9 Times in 8 Posts
There are lots of good suggestions here. I really like the notion of getting out of the saddle regularly to improve the circulation. I used to live in the flattest land in the West (Sacramento Valley), and everyone seemed to figure this out pretty quickly since there were no hills that would encourage standing anyone who didn't get out of the saddle every so often would find their rear and often their knees would be unhappy.

Have you considered that you are just not riding hard enough to get the load off your saddle and onto your pedals? The faster you ride the less of a beating your rear end will take.
B. Carfree is offline  
Old 04-16-11, 06:48 AM
  #20  
bruce19
Senior Member
 
bruce19's Avatar
 
Join Date: Jul 2006
Location: Lebanon (Liberty Hill), CT
Posts: 8,456

Bikes: CAAD 12, MASI Gran Criterium S, Colnago World Cup CX & Guru steel

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1722 Post(s)
Liked 1,272 Times in 734 Posts
Saddle fit and comfort is a mystery to me. Last year I rode with a Selle Italia Trans Am Gel Flow (now there's a mouthful) until mid-season when I switched to a Selle San Marco Arrowhead that is aptly named. Why? I have no idea. It just seemed like the "guy thing" to do. At age 65 you'd think I'd be over that macho thing. In any event neither saddle was a problem. This year I went out for the first 6-7 rides on that arrowhead and had nothing but soreness. Switched back to the first saddle (I am not typing that entire name again.), moved the saddle forward a bit to spin better and.....no soreness. I don't get it but I'm not changing back. At least I don't think so.
bruce19 is offline  
Old 04-16-11, 08:49 AM
  #21  
FrenchFit 
The Left Coast, USA
 
FrenchFit's Avatar
 
Join Date: Feb 2008
Posts: 3,757

Bikes: Bulls, Bianchi, Koga, Trek, Miyata

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 361 Post(s)
Liked 25 Times in 18 Posts
Originally Posted by berner
I began cycling about this time last year. My experience with saddle pain was much the same as yours until at long last finding one that worked for me for up to 50 miles so far. Another aspect of comfort is learning the best position in which to sit. There is an excellent thread on this on the Road Forum here. https://www.bikeforums.net/showthread...tion-Discovery I've begun to implement the concepts discussed with some immediate success. Read through and you may find useful ideas.
+1: For rotating the pelvis and getting off those sit bones.
FrenchFit is offline  
Old 04-19-11, 08:30 PM
  #22  
KillerBeagle
Rabid Member
Thread Starter
 
KillerBeagle's Avatar
 
Join Date: Oct 2010
Location: Olympia, WA
Posts: 198

Bikes: 2006 Trek 2100, 1973 Crescent Mark XX, 196x Peugeot PX-10

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 1 Time in 1 Post
Thanks for all the suggestions - the tax man has interfered with me responding in a meaningful way before now.

Phil and others suggested a good bike fitting, and that is something I had planned, and forgotten, for after I got set up with clipless pedals (which I have been using for a month or so now). I have some good references for a local guy to try.

I did see the "riding position discovery" thread when it first started, but now I see there is MUCH more information in there. I've read through it once, but I think it will take several more reads before I fully comprehend it.

I went on a 50-mile charity ride with my niece and there was not much of a problem until about 40 miles, and then only on the right side for some reason. I have been standing up every few miles, weight off the saddle, previously, but made even more effort to do so on this ride. I think that helped. I'm not riding at max speed since I'm with my niece, so I could probably get more weight on the pedals riding alone. I didn't have much soreness afterwards, but I definitely would not have been able to do many more miles, and I'd really like to build up to full centuries by the end of this season.

There is only one hard chair in the house that makes me notice; the thing that really made me notice the sore sit bones was when I was at a party and ended up sitting on the stone fireplace slab for half an hour.

I attached a picture to give somewhat of an idea of my "typical" position. I flipped the stem when I first got the bike, because the lower position was making my hands/wrists numb almost immediately. If I understand the "ride position discovery" thread, raising the bar may have been the wrong thing to do. However, when I started, I had very little core strength - couldn't even do 10 situps. Now I can do 40 (urged on by my niece, who can do 130), so again if I understand that thread, lowering the bars could actually reduce the weight on my hands by causing my core to hold up the upper body instead.

So, first to get a bike fit - I am pretty happy with my saddle height, but I think the forward/back and bars need some adjustment to get a more efficient position. Then I'll start experimenting with the "ride position" ideas and finally work on the saddle itself when my position is "finalized".

Attached Images
File Type: jpg
me.jpg (88.4 KB, 179 views)
KillerBeagle is offline  
Old 04-20-11, 02:12 PM
  #23  
TromboneAl
Senior Member
 
TromboneAl's Avatar
 
Join Date: Jun 2008
Location: Far, Far Northern California
Posts: 2,873

Bikes: 1997 Specialized M2Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
After thinking I had solved this problem, I went on an 80 mile ride yesterday with excellent Aerotechdesigns bib shorts, and still had pain for the last 30 miles! Like you, the problem is mostly on one side, and I'm considering angling the seat slightly to one side (as recommended by Cobb).

Not for the faint-hearted, but after a ride in which you were sore, take a mirror and check out your butt. You may see red skin, which suggests that there is at least some surface component to the pain.

Too many variables:

Seat height relative to handlebars
Seat height relative to pedals
Seat fore/aft
Seat pitch
Shorts & Chamois
Butt cream present/absent
Saddle
Saddle yaw
Ride distance
How hard you ride
Positioning (spill the bowl or not)
Cleat position

Last edited by TromboneAl; 04-20-11 at 02:15 PM.
TromboneAl is offline  
Old 04-21-11, 07:23 PM
  #24  
DubT
Senior Member
 
Join Date: Sep 2009
Location: Central Illinois
Posts: 1,180

Bikes: Trek Speed Concept 9.9, 2011 Calfee Tetra Tandem

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
Liked 18 Times in 9 Posts
Typically if I have sits bone pain my seat is to high, in your picture it looks like it might be to high. Try lowering it in 1mm increments. When my saddle is to low my knees will start talking to me. There IS a happy medium.

Wayne
DubT is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ciclista_pazza
General Cycling Discussion
26
08-26-19 10:33 PM
Psychbiker
Fitting Your Bike
7
09-06-18 10:40 AM
shady oaks
General Cycling Discussion
8
09-04-13 08:08 PM
Bluestraveler
Fifty Plus (50+)
7
04-16-12 04:04 PM
bianchi10
Clydesdales/Athenas (200+ lb / 91+ kg)
65
07-30-10 01:44 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.