Show Your "American Builders Only" Steel Rides
#102
Senior Member
There's nothing better than an American Steel thread. Somebody on the CR list said t'other day that nobody had a more perfectly integrated, essential bicycle frame than Cinelli or DeRosa. Since we're all entitled to our opinions, I'd never challenge that. But I will say that I'd give up more than one Cinelli or DeRosa, in a heartbeat, for one of gomango's Kvales. Kvale, and other kindred builders, sculpt lines out of tubes and lugs that pretty much force me to stop, gaze, ponder, and smile. After seeing a photo of the seat lug cluster on my DiNucci-built '76 Strawberry, Bryant Bainbridge said: "Classic DiNucci Lines everywhere you look." Mark was barely out of his teens when he built it.
I can't say this quality is unique to American builders, but I see a conscious attempt by US builders, particularly from the late '70s, to engage our eyes, and brains, at a different level. Not necessarily by making lug shapes and shorelines more complex, but by sculpting lines that draw our attention and reward our gaze.
I'm at N-x, so I don't have anything new-to-me to show. But to celebrate the 4th, here are my '70s-'80s vintage small-builder bikes...
'76 DiNucci/Strawberry; "...Lines everywhere you look"
'76 Peter Mooney; Peter's a Brit, but he settled in Boston in the '70s, joining a bunch of young Americans who apprenticed in England and returned to the US to build. I can't recall seeing another double-scalloped seat tube top treatment like this.
'78 Bruce Gordon: the lugs are worked and thinned, but this doesn't have Bruce's higher-end asymmetrical hole treatment, which really slays me.
'82 Columbine: This is still kind of an early frame for them, they started building in '79. It has the Columbine flower lug cut-out, but none of the "fancy" lugwork seen later on.
'82 Bernie Mikkelsen: Bernie's been building forever, but isn't very well known. This frame is from what he called his "French period," with French-style fishmouth treatments on the stays and fork blades. I don't seem to have a photo of the stays or blades, though, so there's a pic of the fastback seat cluster.
I can't say this quality is unique to American builders, but I see a conscious attempt by US builders, particularly from the late '70s, to engage our eyes, and brains, at a different level. Not necessarily by making lug shapes and shorelines more complex, but by sculpting lines that draw our attention and reward our gaze.
I'm at N-x, so I don't have anything new-to-me to show. But to celebrate the 4th, here are my '70s-'80s vintage small-builder bikes...
'76 DiNucci/Strawberry; "...Lines everywhere you look"
'76 Peter Mooney; Peter's a Brit, but he settled in Boston in the '70s, joining a bunch of young Americans who apprenticed in England and returned to the US to build. I can't recall seeing another double-scalloped seat tube top treatment like this.
'78 Bruce Gordon: the lugs are worked and thinned, but this doesn't have Bruce's higher-end asymmetrical hole treatment, which really slays me.
'82 Columbine: This is still kind of an early frame for them, they started building in '79. It has the Columbine flower lug cut-out, but none of the "fancy" lugwork seen later on.
'82 Bernie Mikkelsen: Bernie's been building forever, but isn't very well known. This frame is from what he called his "French period," with French-style fishmouth treatments on the stays and fork blades. I don't seem to have a photo of the stays or blades, though, so there's a pic of the fastback seat cluster.
__________________
Fuggedaboutit!
Fuggedaboutit!
#103
Senior Member
Join Date: Apr 2015
Location: S Oregon
Posts: 801
Bikes: Berthoud Randoneusse, Curt Goodrich steel road, Zanconato Minimax road, Jeff Lyon steel all road,
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I hope you end up liking the frame. can't wait to see how it turns out.
#104
Senior Member
Join Date: Apr 2015
Location: S Oregon
Posts: 801
Bikes: Berthoud Randoneusse, Curt Goodrich steel road, Zanconato Minimax road, Jeff Lyon steel all road,
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
There's nothing better than an American Steel thread. Somebody on the CR list said t'other day that nobody had a more perfectly integrated, essential bicycle frame than Cinelli or DeRosa. Since we're all entitled to our opinions, I'd never challenge that. But I will say that I'd give up more than one Cinelli or DeRosa, in a heartbeat, for one of gomango's Kvales. Kvale, and other kindred builders, sculpt lines out of tubes and lugs that pretty much force me to stop, gaze, ponder, and smile. After seeing a photo of the seat lug cluster on my DiNucci-built '76 Strawberry, Bryant Bainbridge said: "Classic DiNucci Lines everywhere you look." Mark was barely out of his teens when he built it.
I can't say this quality is unique to American builders, but I see a conscious attempt by US builders, particularly from the late '70s, to engage our eyes, and brains, at a different level. Not necessarily by making lug shapes and shorelines more complex, but by sculpting lines that draw our attention and reward our gaze.
I'm at N-x, so I don't have anything new-to-me to show. But to celebrate the 4th, here are my '70s-'80s vintage small-builder bikes...
'76 DiNucci/Strawberry; "...Lines everywhere you look"
'76 Peter Mooney; Peter's a Brit, but he settled in Boston in the '70s, joining a bunch of young Americans who apprenticed in England and returned to the US to build. I can't recall seeing another double-scalloped seat tube top treatment like this.
'78 Bruce Gordon: the lugs are worked and thinned, but this doesn't have Bruce's higher-end asymmetrical hole treatment, which really slays me.
'82 Columbine: This is still kind of an early frame for them, they started building in '79. It has the Columbine flower lug cut-out, but none of the "fancy" lugwork seen later on.
'82 Bernie Mikkelsen: Bernie's been building forever, but isn't very well known. This frame is from what he called his "French period," with French-style fishmouth treatments on the stays and fork blades. I don't seem to have a photo of the stays or blades, though, so there's a pic of the fastback seat cluster.
I can't say this quality is unique to American builders, but I see a conscious attempt by US builders, particularly from the late '70s, to engage our eyes, and brains, at a different level. Not necessarily by making lug shapes and shorelines more complex, but by sculpting lines that draw our attention and reward our gaze.
I'm at N-x, so I don't have anything new-to-me to show. But to celebrate the 4th, here are my '70s-'80s vintage small-builder bikes...
'76 DiNucci/Strawberry; "...Lines everywhere you look"
'76 Peter Mooney; Peter's a Brit, but he settled in Boston in the '70s, joining a bunch of young Americans who apprenticed in England and returned to the US to build. I can't recall seeing another double-scalloped seat tube top treatment like this.
'78 Bruce Gordon: the lugs are worked and thinned, but this doesn't have Bruce's higher-end asymmetrical hole treatment, which really slays me.
'82 Columbine: This is still kind of an early frame for them, they started building in '79. It has the Columbine flower lug cut-out, but none of the "fancy" lugwork seen later on.
'82 Bernie Mikkelsen: Bernie's been building forever, but isn't very well known. This frame is from what he called his "French period," with French-style fishmouth treatments on the stays and fork blades. I don't seem to have a photo of the stays or blades, though, so there's a pic of the fastback seat cluster.
#106
Senior Member
Join Date: Mar 2011
Location: Cowan Heights, CA
Posts: 850
Bikes: Wizard, Eisentraut, Paramount, Litton, Turner, Surley, Trek, Kona, Landshark, Hujsak, Masi, Tesch, Holland, Retrotec, Spectrum
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
#107
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 14,491
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 821 Post(s)
Liked 255 Times
in
142 Posts
@ PCB
Beautiful bikes pictured above. Right up my alley.
After riding a lot of bikes, most of us settle in on exacting frameset characteristics that click all the boxes.
People like what they like and I like Chris Kvale at this point. His handwork is top notch and the framesets ride beautifully.
The nice thing is his shop is ten minutes from our house.
I intend to replace my Bilenky tourer with something a little fancier in a few years and I sure hope he's still building at that point.
[IMG]Untitled by gomango1849, on Flickr[/IMG]
Beautiful bikes pictured above. Right up my alley.
After riding a lot of bikes, most of us settle in on exacting frameset characteristics that click all the boxes.
People like what they like and I like Chris Kvale at this point. His handwork is top notch and the framesets ride beautifully.
The nice thing is his shop is ten minutes from our house.
I intend to replace my Bilenky tourer with something a little fancier in a few years and I sure hope he's still building at that point.
[IMG]Untitled by gomango1849, on Flickr[/IMG]
#108
Senior Member
Join Date: Mar 2012
Location: Ocean County, NJ
Posts: 2,914
Bikes: Looking for a Baylis or Wizard in 59-62cm range
Mentioned: 65 Post(s)
Tagged: 0 Thread(s)
Quoted: 374 Post(s)
Liked 344 Times
in
115 Posts
Well said PCB, beautiful bikes you have there.
Last edited by Vonruden; 07-06-15 at 06:08 AM.
#109
Full Member
Proteus Touring Bike
Made in College Park, MD around 1974.
I traded this away a few years ago because it was too small for me.
I traded this away a few years ago because it was too small for me.
#110
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,466 Times
in
1,434 Posts
@pcb, I think I see your point. There does seem to be a particular approach unique to some American builders. @gomango's Kvale ahead is a good example.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#112
Full Member
Thread Starter
Bruce Gordon site >>>>Nothing is better than a bike that fits
#113
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
Well, I just so happen to have a couple/three that bleed red, white and blue
Early 80s Davidson:
2002 Davidson:
1979 Sparrow:
DD
Early 80s Davidson:
2002 Davidson:
1979 Sparrow:
DD
#115
Senior Member
77 Romic & 89 Trek
Romic 75 frame made for me in 1977. All DB Champion #1 :
And an 89 Trek.... notable for American made tubing (True Temper Team) and because AFAIK, it was the last year
Trek made steel road bikes....although they continued to make steel touring bikes into the 90's:
And an 89 Trek.... notable for American made tubing (True Temper Team) and because AFAIK, it was the last year
Trek made steel road bikes....although they continued to make steel touring bikes into the 90's:
Last edited by vtchuck; 10-01-15 at 01:18 PM.
#116
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,580
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
#119
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,653
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1025 Post(s)
Liked 2,526 Times
in
1,056 Posts
#121
Disciple of St. Tullio
Join Date: Jul 2008
Location: State of Jefferson
Posts: 743
Bikes: Ciöcc, Bianchi, DeRosa, Eddy Merckx, Frejus, Hampsten, Kondor, Losa, Magni, Pegoretti, Pelizzoli, Pogliaghi, Scapin
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 334 Times
in
140 Posts
Let me be the first to throw a Hampsten in the mix.
#123
Senior Member
Join Date: Jul 2012
Location: Mullumbimby, Australia
Posts: 85
Bikes: Trek Modone 6.5 (08), 1930's Healing, 1994 Ritchey Road Logic, Kuwuhara T/T early 90's, Shogun Prairie Breaker Expert 1992,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
My 94 Ritchey Road Logic
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
#125
Cyclist