The "Show off your Japanese bike." thread
#77
Lanky Lass
I think ChilliPepper advertised it as a 46, if I remember correctly, but I could be mistaken. It is tiny, and it fits me perfectly .
East Hill
East Hill
__________________
___________________________________________________
TRY EMPATHY & HAVE LOVE IN YOUR HEART, PERHAPS I'LL SEE YOU ON THE ROAD...
___________________________________________________
TRY EMPATHY & HAVE LOVE IN YOUR HEART, PERHAPS I'LL SEE YOU ON THE ROAD...
#78
Senior Member
Join Date: Jun 2006
Posts: 1,404
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
That deep red looks good East Hill!
Mine is an '83 (KC 32018) and all the components appear original except the wheelset. The seller tried to do a bait and switch and sent me some junk wheels that had dried mud caked in the axles so hard there was no way a skewer had been in them for years. The set shown in the auction was on another bike a week later. The replacement wheelset he sent has a 6D code on the Suzue hubs while all the other component date codes are from mid '83. I like how the gold anodized rims match the rest of the bike, so no gripes here.
Original components with date codes:
SR seatpost - F 83
Sugino RT crankset - GC
SR Sakae Custom stem and bars - J 83
Suntour ARX Front DR - ZC
Suntour ARX Rear DR - ZH
Diacompe 500 Brakes - 0983 M
Non-original parts:
Suzue hubs 6D with Araya 700c gold alloy rims and Shimano Z2012 6 sp freewheel.
Next seat and Nashbar pedals.
BTW This 52cm bike is too small for me so will be for sale soon.
Mine is an '83 (KC 32018) and all the components appear original except the wheelset. The seller tried to do a bait and switch and sent me some junk wheels that had dried mud caked in the axles so hard there was no way a skewer had been in them for years. The set shown in the auction was on another bike a week later. The replacement wheelset he sent has a 6D code on the Suzue hubs while all the other component date codes are from mid '83. I like how the gold anodized rims match the rest of the bike, so no gripes here.
Original components with date codes:
SR seatpost - F 83
Sugino RT crankset - GC
SR Sakae Custom stem and bars - J 83
Suntour ARX Front DR - ZC
Suntour ARX Rear DR - ZH
Diacompe 500 Brakes - 0983 M
Non-original parts:
Suzue hubs 6D with Araya 700c gold alloy rims and Shimano Z2012 6 sp freewheel.
Next seat and Nashbar pedals.
BTW This 52cm bike is too small for me so will be for sale soon.
#79
Lanky Lass
Darn it, that 52cm is too big for me!
In case anyone wants to look at all of my Nishikis (except for the International, which bigbossman is childminding until I get down to California in mid-April), here is the link:
https://www.bikeforums.net/showthread.php?t=282606
New member ricohman has a beautiful Nishiki Continental in this thread too.
East Hill
In case anyone wants to look at all of my Nishikis (except for the International, which bigbossman is childminding until I get down to California in mid-April), here is the link:
https://www.bikeforums.net/showthread.php?t=282606
New member ricohman has a beautiful Nishiki Continental in this thread too.
East Hill
__________________
___________________________________________________
TRY EMPATHY & HAVE LOVE IN YOUR HEART, PERHAPS I'LL SEE YOU ON THE ROAD...
___________________________________________________
TRY EMPATHY & HAVE LOVE IN YOUR HEART, PERHAPS I'LL SEE YOU ON THE ROAD...
#80
Senior Member
Hi all,
Here pics of my 1981 Koga Miyata ProRacer & 1984(my guess) ProRacer-S =>
More pics of my:
81 ProRacer
84 ProRacer-S
Unfortunately I have currently no pics available of my '80 FullPro-L and '91 GentsRacer Carbolite.
Here pics of my 1981 Koga Miyata ProRacer & 1984(my guess) ProRacer-S =>
More pics of my:
81 ProRacer
84 ProRacer-S
Unfortunately I have currently no pics available of my '80 FullPro-L and '91 GentsRacer Carbolite.
#81
*
Join Date: Jan 2007
Posts: 3,458
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I owned all 3 of these Dave Scott Ironman (men?), but all 3 are now in the hands of other riders.
The red one I bought new in '86, and had upgraded it over time to a 7 speed rear, with a DA RD, DA hubs
and the matching red Vuelta Airline2 rims. The other 2 (an '88 and '89) were built up from refurbished
frames with rattlecan paintjobs and homemade decals.
#82
Full Member
elev12k,
where do you find all those SWEET koga-miyatas?
very nice samples you have. oh and i love those old dura ace heasdsets with the funky locknuts.
where do you find all those SWEET koga-miyatas?
very nice samples you have. oh and i love those old dura ace heasdsets with the funky locknuts.
#83
I am not a deer
Join Date: Oct 2006
Location: Michigan
Posts: 64
Bikes: 1987 Centurion Ironman Master, 1984 Fuji touring series IV
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here's my Centurion
I also have a an 84 Fuji Touring series IV, but no picture.
I also have a an 84 Fuji Touring series IV, but no picture.
Last edited by knewbike; 04-01-07 at 07:47 PM.
#86
Look KG386i
Join Date: Feb 2007
Location: Baltimore, MD
Posts: 230
Bikes: 2004 Look KG386i
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by barba
Why no rear brake?
I always keep everything I take off, however!
#87
Senior Member
Join Date: Nov 2005
Posts: 4,083
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by cmyke
I took it off because a) I can get along fine with just a front brake b) I like the way the rear end looks when there aren't any cables, etc.
I always keep everything I take off, however!
I always keep everything I take off, however!
Elev12K: That '81 Koga-Miyata is a stunner (though I like both).
#90
Senior Member
Join Date: Sep 2005
Location: Philadelphia's western 'burbs
Posts: 238
Bikes: '89 Bridgestone MB-3, '91 Bridgestone CB-0, '92 Bridgestone RB-2, '94 Bridgestone MB-2, '96 Trek 8000, '05 Jamis Dakar XC Expert
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Here's my '92 Bridgestone RB-2:
#91
WoodBadge NE-VI-1
Join Date: Oct 2005
Location: Baltimore
Posts: 386
Bikes: 1983 Sequoia by Specialized; 1989 Panasonic
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Hi,
I have two Fuji Sagres, circa 1980. View them via my signature.
Email if you have a comment.
I'm also looking for a long fork - 295/296mm - from the bearing to the top.
I have two Fuji Sagres, circa 1980. View them via my signature.
Email if you have a comment.
I'm also looking for a long fork - 295/296mm - from the bearing to the top.
#93
Lanky Lass
Originally Posted by vgoose
Made in Japan for Schwinn Chicago!
East hill
__________________
___________________________________________________
TRY EMPATHY & HAVE LOVE IN YOUR HEART, PERHAPS I'LL SEE YOU ON THE ROAD...
___________________________________________________
TRY EMPATHY & HAVE LOVE IN YOUR HEART, PERHAPS I'LL SEE YOU ON THE ROAD...
#94
Senior Member
Hi,
I earlier posted my '81 ProRacer and '84 ProRacer-S, both Koga Miyatas. I now also have pics of two other rides in my stable: a 1980 Koga Miyata FullPro-L and a 1984 Pro Am.
Anyone rember the IJsboerke and Capri Sonne teams of the late seventies, early nineties??? They raced FullPros (Team Miyata in the US). The FullPro-L is in fact a slimmed down and shortened version of that bike aimed at short, fast stages and time trail. My particular FPL is a custom job. There is a name engraved on top the bb housing, under the paint. Probably it is an ex competition bike. The bike has some patin. Cosmeticly there are some things, but mechanicly it is still superb! I can now agree from own experience 1st gen DA hubs really kick butt! They didn't go very well when I picked the bike up. There was some stuff in them that long ago could be considered grease. I put new grease and balls in the hubs and they go supersmooth again.
The bike is equipped with a mix of 1st gen DA and DA EX. The Nuovo Record rear mech is by Campagnolo. DA post & stem, Cinelli bar.
The frame is EXTREMELY well made, and detailling is VERY nice. The M's that are cut out the bb housing and the Miyata logos on top the forkcrown are nice touches for example. Tubing is Tange Champion #1. It is a light frame. The non custom FPL in 54 weighs 1700gr according to Koga.
I used to put more time in my pics. Hope to have nicer ones and in particular more close ups in future.
The FPL and the Pro Am:
The Pro Am resorted below the FullPros and ProRacer in the Koga line up and it was sold as frameset only. This one is built up with 600 AX/600. Though lower than the FPL, it is still a nicely made frame. Lugs look neat and have the little M's in them. Also with this bike the bb housing is open. Holes this time, no M's.
Tubing is Miyatas own Hardtlite FM-2. By 1984 Miyata had its own tubing.
I bought it at a nearby farmhouse several weeks ago. I couldn't resist - again
AX brakes =>
I like those brakes. They look so cool.
Friday a week ago I picked up my second FullPro-L. I have both years now. With the 1981 model Miyata strived for improving aerodynamics. Forks with less drag, stays attach at the back of the seattube, little bits that cause drag disappeared as much as possible. Of course the bike had also the DA AX groupset fitted. According to Shimano they managed to reduce drag by 20% with the AX groupset.
Weight of the 81 FPL frame is 1840gr. Forks = 640gr.
It the FPL's successor is the FullPro-A. A for Aero. That bike had dropshaped headtube, seattube and bb and was completely fillet brazed. It is not very likely I will ever get my hands on one.
Thanks
I earlier posted my '81 ProRacer and '84 ProRacer-S, both Koga Miyatas. I now also have pics of two other rides in my stable: a 1980 Koga Miyata FullPro-L and a 1984 Pro Am.
Anyone rember the IJsboerke and Capri Sonne teams of the late seventies, early nineties??? They raced FullPros (Team Miyata in the US). The FullPro-L is in fact a slimmed down and shortened version of that bike aimed at short, fast stages and time trail. My particular FPL is a custom job. There is a name engraved on top the bb housing, under the paint. Probably it is an ex competition bike. The bike has some patin. Cosmeticly there are some things, but mechanicly it is still superb! I can now agree from own experience 1st gen DA hubs really kick butt! They didn't go very well when I picked the bike up. There was some stuff in them that long ago could be considered grease. I put new grease and balls in the hubs and they go supersmooth again.
The bike is equipped with a mix of 1st gen DA and DA EX. The Nuovo Record rear mech is by Campagnolo. DA post & stem, Cinelli bar.
The frame is EXTREMELY well made, and detailling is VERY nice. The M's that are cut out the bb housing and the Miyata logos on top the forkcrown are nice touches for example. Tubing is Tange Champion #1. It is a light frame. The non custom FPL in 54 weighs 1700gr according to Koga.
I used to put more time in my pics. Hope to have nicer ones and in particular more close ups in future.
The FPL and the Pro Am:
The Pro Am resorted below the FullPros and ProRacer in the Koga line up and it was sold as frameset only. This one is built up with 600 AX/600. Though lower than the FPL, it is still a nicely made frame. Lugs look neat and have the little M's in them. Also with this bike the bb housing is open. Holes this time, no M's.
Tubing is Miyatas own Hardtlite FM-2. By 1984 Miyata had its own tubing.
I bought it at a nearby farmhouse several weeks ago. I couldn't resist - again
AX brakes =>
I like those brakes. They look so cool.
Friday a week ago I picked up my second FullPro-L. I have both years now. With the 1981 model Miyata strived for improving aerodynamics. Forks with less drag, stays attach at the back of the seattube, little bits that cause drag disappeared as much as possible. Of course the bike had also the DA AX groupset fitted. According to Shimano they managed to reduce drag by 20% with the AX groupset.
Weight of the 81 FPL frame is 1840gr. Forks = 640gr.
It the FPL's successor is the FullPro-A. A for Aero. That bike had dropshaped headtube, seattube and bb and was completely fillet brazed. It is not very likely I will ever get my hands on one.
Thanks
#95
ILOVEOLDBIKES
Join Date: Oct 2005
Location: Houston
Posts: 266
Bikes: 1986 Schwinn Paramount, 1995 Schwinn Homegrown Pro, 1973 Lawwill Pro Cruiser, 2000 Cannondale r 600, 1987 Nishiki Medalist, 1964 Schwinn American, 1986 Alan
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 9 Times
in
5 Posts
1986 Nishiki Medalist
1986 Nishiki Medalist, I love this bike !
Last edited by gwhunter; 05-12-07 at 02:07 PM.
#96
Yet another vegan biker
Join Date: Dec 2005
Location: Trapped behind the corn curtain
Posts: 965
Bikes: Sakae Prism, Vintage Fuji bike(S), too many bikes, one from scratch bike.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Originally Posted by BDS
could you do me a favor? what serial number info is stamped on your bottom bracket? -- Here's why: I've been riding an older steel Fuji roadbike for about 10 years (I don't have any decent pictures of it, though, or I'd post 'em) but I've never been able to determine its pedigree.
...
There's a scarcity of Fuji info on the web as many of us know. Anyone have any thoughts?
...
There's a scarcity of Fuji info on the web as many of us know. Anyone have any thoughts?
I've got a couple of Fujis. The mystery one is by far my favorite ride:
#98
Senior Member
Join Date: Jun 2006
Posts: 1,404
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I pulled out this 1979 Puch Pathfinder to take photos with the intent to sell it as I don't ride it often. It's got all the dorky bits that I actually enjoy in a bike... turkey wings, stem shifters, a chainring guard, beautiful shiny chrome steel rims, and it even has a kickstand! It also has a Suntour Spirt reverse pull front deraileur, another favorite of mine... because it just makes sense.
After taking photos and a ride and looking it over again (it's practically like new), I decided it stays.
After taking photos and a ride and looking it over again (it's practically like new), I decided it stays.
#99
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,925
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,093 Times
in
640 Posts
Those Koga-Miyatas are really nice bikes, but weren't they actually built in Europe?
__________________
In search of what to search for.
In search of what to search for.
#100
Senior Member
Join Date: Dec 2005
Posts: 17,159
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,707 Times
in
2,613 Posts
Seems like this thread is calling out for a shot of the downtube decal on a Kabuki I sold over the weekend. Fwiw, I've also seen this decal on other Japanese bikes.
Neal
Neal