Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Capable chain repair tool? Does one exist that can be carried on the bike?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Capable chain repair tool? Does one exist that can be carried on the bike?

Old 05-19-19, 11:15 AM
  #26  
woodcraft
Senior Member
 
woodcraft's Avatar
 
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times in 569 Posts
Originally Posted by HillRider
Yeah, I have a couple of those and have them on my daily ride bikes. I used it one time to repair another rider's chain and it worked but it certainly isn't a "shop quality" tool. I haven't seen them for sale in years and wonder if they are still being made.


ooh, want. That would save 10g over my current one.
woodcraft is offline  
Old 05-19-19, 12:09 PM
  #27  
JanMM
rebmeM roineS
 
JanMM's Avatar
 
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,215

Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 345 Times in 225 Posts
I started carrying a Park CT-5 a few years ago and have used it twice on club rides. Once to help another rider by removing the mangled part of a dropped chain and then joining the non-mangled ends back together. Got my hands dirty but she was able to finish the ride. Second time I let a stranded rider use it to fix his chain. Can't remember his problem but he was able to fix it and finish the ride. Kept my hands clean that time.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
JanMM is offline  
Old 05-19-19, 12:25 PM
  #28  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 17,960

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4153 Post(s)
Liked 3,751 Times in 2,245 Posts
Originally Posted by fietsbob
Modern bushing-less flush rivet head derailleur chains are never lengthened,
only shortened and joined with a quick link.


to effect repairs you bring a section of the same chain and more quick links...

So for pressing out the rivet pin, the chain tool can be simple , though it needs to be reliable..


gave a trusty, but not the lightest one, to a friend , he found a lighter, more aluminum one , brought it instead ..

and somewhere in the southern Argentine Andes foothills he had to find a nail and use a rock ,

when the lighter chain tool broke.......
I take it you have never worked on a tandem or recumbent. Both are well known for their longer the common single up right bikes use. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Old 05-19-19, 12:27 PM
  #29  
krecik
Full Member
 
Join Date: Jun 2018
Posts: 358
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Liked 86 Times in 54 Posts
​​​​​​​

Last edited by krecik; 01-13-21 at 02:10 PM.
krecik is offline  
Old 05-19-19, 01:10 PM
  #30  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
We deal with them , Andy.. specialist recumbent shops buy 100 foot reels of chain ..

out in the Goondocks we use more quick links and join together the boxed chains for single bikes..
fietsbob is offline  
Old 05-19-19, 04:16 PM
  #31  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2025 Post(s)
Likes: 0
Liked 1,095 Times in 741 Posts
Originally Posted by woodcraft
ooh, want. That would save 10g over my current one.
Probably save more than that. The Chain Pup weighs only 25 grams!
HillRider is offline  
Old 05-19-19, 05:06 PM
  #32  
Sapperc
Junior Member
 
Join Date: Feb 2019
Location: Lompoc, CA
Posts: 153

Bikes: Specialized Roubaix SL4 Comp, Trek 930, Nishiki International

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 64 Post(s)
Liked 25 Times in 15 Posts
Check out Topeak multi tools. It’s the only thing o use how installing links and repairing chains. It works that well!
Sapperc is offline  
Old 05-19-19, 09:14 PM
  #33  
drlogik 
Senior Member
 
drlogik's Avatar
 
Join Date: Mar 2016
Location: North Carolina
Posts: 1,763

Bikes: '87-ish Pinarello Montello; '89 Nishiki Ariel; '85 Raleigh Wyoming, '16 Wabi Special, '16 Wabi Classic, '14 Kona Cinder Cone

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 698 Post(s)
Liked 405 Times in 251 Posts
I use a Top-end Hozan C-371 chain tool in my home shop; however, I keep a Park CT-5 in each of my bike saddle bags. I have rarely had any trouble using this tool.

This tip is a good one and spot on:

But I'll add a tip. Once the chain is positioned in the tool, the pin is screwed onto the chain's rivet and it begins to move slightly. Then back off the tool's pin and restart the screwing in. What this does is let the tool's pin better center on the chain's rivet before plunging into the chain's holes.
Another tip is make sure the pin on the tool is straight to start with and go slowly and carefully until you are sure the pin is being driven out straight. A mistake some folks make is going too fast. Slow and steady is the way to go.

Working in shops years ago I figured that out by myself as do most mechanics. This tip is good for all chain tools btw.
drlogik is offline  
Old 05-20-19, 07:31 AM
  #34  
JanMM
rebmeM roineS
 
JanMM's Avatar
 
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,215

Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 345 Times in 225 Posts
Originally Posted by fietsbob
We deal with them , Andy.. specialist recumbent shops buy 100 foot reels of chain ..

out in the Goondocks we use more quick links and join together the boxed chains for single bikes..
And some recumbent/tandem owners purchase chain by the foot. But joining sections with quick links as needed is fine.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
JanMM is offline  
Old 05-20-19, 08:58 AM
  #35  
well biked
Senior Member
 
well biked's Avatar
 
Join Date: Jul 2005
Posts: 7,486
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 159 Times in 88 Posts
Another vote for the Park CT-5 chain tool for carrying in your tool kit. Reasonably small and light, works great, have carried the CT-5 for years on my bikes.
well biked is offline  
Old 05-20-19, 09:20 AM
  #36  
KC8QVO
Senior Member
Thread Starter
 
Join Date: Apr 2013
Posts: 1,173

Bikes: Surly Disk Trucker, 2014 w/Brooks Flyer Special saddle, Tubus racks - Duo front/Logo Evo rear, 2019 Dahon Mariner D8, Both bikes share Ortlieb Packer Plus series panniers, Garmin Edge 1000

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 405 Post(s)
Liked 115 Times in 99 Posts
Thanks for the info All.

As far as having a durable tool and using it a lot - I have not had any luck with the one I do have, not that I have used it very often, but found it worthless when I did try to use it. So I don't anticipate needing to use it "a lot", but I need something that I can trust will work when I do need to use it. To that point is why I want a durable tool - something nice that will last and be reliable.

The hydraulic press I have is a 20t floor mount. I use it for pressing truck parts - ball joints, bearings, seals, etc. One tool with a bazillion uses. I've fixed chains before with it too - with a bit of finesse, chainsaw chains not bike chains.
KC8QVO is offline  
Old 05-20-19, 09:39 AM
  #37  
KC8QVO
Senior Member
Thread Starter
 
Join Date: Apr 2013
Posts: 1,173

Bikes: Surly Disk Trucker, 2014 w/Brooks Flyer Special saddle, Tubus racks - Duo front/Logo Evo rear, 2019 Dahon Mariner D8, Both bikes share Ortlieb Packer Plus series panniers, Garmin Edge 1000

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 405 Post(s)
Liked 115 Times in 99 Posts
What are everyones thoughts on the CT-3.3 and CT-3.2 tools? I'm not sure what the difference is, maybe the anvil?

For what it is worth, the main bike I have is a 2014 Disk Trucker. I am not sure what chain is on it but the new models on their website show KMC x10 chain. The other bike I have is a Dahon Mariner D8 folder. No ideal what the chain is on it, either. I don't think any of the chain pins have the divots in them with the outer edges peened. They are flat pins, but not sure how much of a flange there is on them, if any, after being pressed in? Will that affect tool selection any?
KC8QVO is offline  
Old 05-20-19, 09:41 AM
  #38  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
https://www.parktool.com/product/min...category=Chain
I had this on my last bike tour.. in my tool bag, in a pannier.. CT-5

fietsbob is offline  
Old 05-20-19, 09:43 AM
  #39  
88Tempo
Senior Member
 
Join Date: Jun 2018
Posts: 280
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Likes: 0
Liked 19 Times in 15 Posts
Originally Posted by KC8QVO
Thanks for the info All.

As far as having a durable tool and using it a lot - I have not had any luck with the one I do have, not that I have used it very often, but found it worthless when I did try to use it. So I don't anticipate needing to use it "a lot", but I need something that I can trust will work when I do need to use it. To that point is why I want a durable tool - something nice that will last and be reliable.

The hydraulic press I have is a 20t floor mount. I use it for pressing truck parts - ball joints, bearings, seals, etc. One tool with a bazillion uses. I've fixed chains before with it too - with a bit of finesse, chainsaw chains not bike chains.
A long time ago when I used to buy chainsaw chain by the roll I owned a chain tool that looked like a modified pair of vise grips. I've often thought something like that would be nice for bicycle chains. For shop use of course.
88Tempo is offline  
Old 05-20-19, 10:39 AM
  #40  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
when chains had to be narrower to fit in smaller spaces,, (9+ speeds)
the pin/rivets had to no longer be proud above the side plates..









...
fietsbob is offline  
Old 05-20-19, 11:03 AM
  #41  
goldensprocket
Banned.
 
Join Date: May 2019
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Originally Posted by 88Tempo
A long time ago when I used to buy chainsaw chain by the roll I owned a chain tool that looked like a modified pair of vise grips. I've often thought something like that would be nice for bicycle chains. For shop use of course.
goldensprocket is offline  
Old 05-20-19, 11:13 AM
  #42  
88Tempo
Senior Member
 
Join Date: Jun 2018
Posts: 280
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Likes: 0
Liked 19 Times in 15 Posts
That looks like it would work pretty well. When I went looking for a chain tool I ended up with one like Fietsbob posted. Right now it serves double duty for both work in the garage and getting tossed in a bike bag when I remember it.
88Tempo is offline  
Old 05-27-19, 08:38 AM
  #43  
Last ride 76 
1/2 as far in 2x the time
 
Last ride 76's Avatar
 
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,935

Bikes: Yes, Please.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times in 222 Posts
Originally Posted by Bill Kapaun
The OP wanted a LIGHT WEIGHT TOOL to carry.
Not a heavy chain.
oops...

I guess I should have read the thread more carefully.
Last ride 76 is offline  
Old 05-29-19, 06:27 PM
  #44  
djb
Senior Member
 
Join Date: Jul 2010
Location: Montreal Canada
Posts: 13,175
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 2725 Post(s)
Liked 948 Times in 781 Posts
KC, consider getting a really good quality multi tool, Mine has a chain breaker and its what I use to size chains when I put on new ones, and it works great.
I have a couple of old crappy ones that have busted pins or whatever and cant use them anymore but my Lezyne multi tool chain tool works wonderfully.
I know you are looking into touring, and I highly recommend getting a lezyne or other good quality multitool that has one in it. yes, they are more expensive than cheap multitools, but totally worth it, and small and compact.

https://ride.lezyne.com/collections/multi-tools

I dont recall whtich one I have, but they all appear to have the same chain tool.

and a good multitool is worth it in the long run anyway.
djb is offline  
Old 05-29-19, 08:25 PM
  #45  
Mitkraft
Junior Member
 
Join Date: Aug 2018
Posts: 152
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 62 Post(s)
Liked 14 Times in 11 Posts
I carry a Topeak Hexus II and it has worked great on a few chains including one that broke my dedicated chain breaker I’d had for a while.
Mitkraft is offline  
Old 05-29-19, 10:31 PM
  #46  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3124 Post(s)
Liked 2,101 Times in 1,366 Posts
Originally Posted by Last ride 76
oops...

I guess I should have read the thread more carefully.
That’s clearly a forgery
Darth Lefty is offline  
Old 05-29-19, 10:37 PM
  #47  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3124 Post(s)
Liked 2,101 Times in 1,366 Posts
In the world of today with quick links I think it would be pretty good to have a chain tool that’s only designed to push the pin out. The links could be held more securely since there’s only one position and the pin could be a tiny bit larger. Only on a multi tool, let the traditional tools stay versatile
Darth Lefty is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.