Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Do I need narrow wide chain ring for x1 setup?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Do I need narrow wide chain ring for x1 setup?

Old 06-16-19, 06:31 AM
  #1  
Andiroo99
Brit Rider
Thread Starter
 
Andiroo99's Avatar
 
Join Date: Jun 2011
Location: DC
Posts: 196

Bikes: Mercian King of Mercia (1983), Balance XR-550 (1993), Surly Cross Check, 1948 Condor British steel lightweight.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Do I need narrow wide chain ring for x1 setup?

Hi All

I am building up a x1 road set-up on a late 80s steel frame. I want to use a SRAM 10 or 11 speed cassette on rear and a x1 chain ring. I plan to also use one of the new rear derailleur with a clutch. The question is do I need to use a narrow wide chain ring up front, say from SRAM, Wolf Tooth, Praxis etc or can I just use a more standard config. I obviously dont want to run into issues with the chain coming off.

Many Thanks

Arb
Andiroo99 is offline  
Old 06-16-19, 06:57 AM
  #2  
rhenning
Senior Member
 
Join Date: Apr 2006
Posts: 3,653
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Likes: 0
Liked 106 Times in 80 Posts
The chainring must match the rear sprockets you use so if you use 10 then a 10 speed chain and the same is true if you use 11. You need a narrow chain ring. Roger
rhenning is offline  
Old 06-16-19, 07:07 AM
  #3  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2025 Post(s)
Likes: 0
Liked 1,095 Times in 741 Posts
Most current road or MTB chainrings intended for double or triple cranks have ramps and shaped teeth to improve shifting, which is exactly what you don't want. An old-fashion "flat" chainring such as the ones Surly offers would be better but may not match the newer narrow 10 and 11-speed chains. A narrow-wide suitable for 10 and 11-speed chains would be the most reliable. As long as you are making the change, go with the most suitable chainring.
HillRider is offline  
Old 06-16-19, 07:41 AM
  #4  
AlmostTrick
Tortoise Wins by a Hare!
 
AlmostTrick's Avatar
 
Join Date: Feb 2006
Location: Looney Tunes, IL
Posts: 7,398

Bikes: Wabi Special FG, Raleigh Roper, Nashbar AL-1, Miyata One Hundred, '70 Schwinn Lemonator and More!!

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 941 Times in 504 Posts
I think the narrow/wide ring is more important for chain retention than the clutch rear D. On the road, anyway. I run a Wolf Tooth with standard rear D and haven't had a chain drop issue yet.

The clutch adds a little drag, N/W CR does not.
AlmostTrick is offline  
Old 06-16-19, 08:15 AM
  #5  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 8,553

Bikes: Nekobasu, Pandicorn, Lakitu

Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 4905 Post(s)
Liked 1,731 Times in 958 Posts
If it's spending the money that's your primary concern, USA Made chainrings are excellent, and $28 shipped.
__________________
DrIsotope is offline  
Old 06-16-19, 08:19 AM
  #6  
ChinookTx
Full Member
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 293

Bikes: Lynskey GR270

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 69 Times in 49 Posts
I have a narrow-wide wolftooth 1x as well and despite having an XT rear derailleur with clutch, the clutch is always off. Never dropped a chain.

I second the "narrow wide is more important than a clutch" opinion.
ChinookTx is offline  
Old 06-16-19, 09:05 AM
  #7  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
No ..
fietsbob is offline  
Old 06-16-19, 09:25 AM
  #8  
well biked
Senior Member
 
well biked's Avatar
 
Join Date: Jul 2005
Posts: 7,486
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 159 Times in 88 Posts
I say go with a narrow-wide chainring. They're available in a wide variety of tooth counts and BCD's, and aren't all that expensive in the big picture when you are building up a drivetrain as it sounds like you're doing. Especially with the clutch-type RD you mention, you will eliminate chain drop as a concern. Not all that many years ago, chain retention devices were common and necessary on many 1x setups. With narrow-wide chainrings, those days are gone for the most part.
well biked is offline  
Old 06-16-19, 01:42 PM
  #9  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
I have several 1 by IGH bikes they're fine with simple flat old style chainrings ..


you may feel you need it, then I'm not going to talk you out of it ..
fietsbob is offline  
Likes For fietsbob:
Old 06-16-19, 02:55 PM
  #10  
well biked
Senior Member
 
well biked's Avatar
 
Join Date: Jul 2005
Posts: 7,486
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 159 Times in 88 Posts
Originally Posted by fietsbob
I have several 1 by IGH bikes they're fine with simple flat old style chainrings ..
.
That's good info if the OP were talking about converting to singlespeed or an IGH, i.e. chainline is presumably very good and doesn't change. But the OP is not talking about that, his chainline will change radically as he shifts from one end of the cassette to the other.
well biked is offline  
Old 06-17-19, 03:57 AM
  #11  
Stormy Archer
Peugeot PSV10 or somethin
 
Stormy Archer's Avatar
 
Join Date: Jun 2018
Posts: 216

Bikes: yes

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 100 Post(s)
Liked 14 Times in 10 Posts
You can use like a BMX chainring. Works pretty well. But yeah don't use an indexed chainring. BMX/singlespeed chainrings are super cheap.

Of course there are a few single speed and track chainrings that are thick and exclusively made for 1/8th" chains but those are rare, it's much more common with freewheels and cogs.
Stormy Archer is offline  
Old 06-17-19, 05:06 AM
  #12  
JonathanGennick 
Senior Member
 
JonathanGennick's Avatar
 
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131

Bikes: Priority 600, Priority Continuum, Devinci Dexter

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times in 37 Posts
Originally Posted by Andiroo99
The question is do I need to use a narrow wide chain ring up front, say from SRAM, Wolf Tooth, Praxis etc or can I just use a more standard config. I obviously dont want to run into issues with the chain coming off.
Are you buying new? It's one thing if you're reusing old parts. If buying new though, then buy the right stuff. Consider a clutch derailleur too, imho, if you are buying a derailleur for the build.
JonathanGennick is offline  
Old 06-17-19, 06:42 AM
  #13  
Moe Zhoost
Half way there
 
Moe Zhoost's Avatar
 
Join Date: Sep 2015
Location: North Carolina
Posts: 2,955

Bikes: Many, and the list changes frequently

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 879 Times in 526 Posts
I put over a thousand miles on a non-ramped inner chainring on a road bike I set up as a 1x1l without a drop, even without a clutch derailleur. I did change to a Wolf Tooth narrow-wide primarily because I wanted to switch to a 42t from a 39t and I thought that a bit of extra protection was worth it. For smooth surface riding, as long as your return chain tension is good you should be ok, but as @JonathanGennick points out, why not go N-W if buying new.
Moe Zhoost is offline  
Old 06-17-19, 08:20 AM
  #14  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
Cyclocross racing single ring, uses regular chain rings too , simply has other chain retention devices
such as added outer ring guards .. polished, anodized or carbon fiber..


narrow-wide is just today's trend.. as is gravel racing in the farmlands..





>>>
fietsbob is offline  
Likes For fietsbob:
Old 06-17-19, 08:22 AM
  #15  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2025 Post(s)
Likes: 0
Liked 1,095 Times in 741 Posts
Originally Posted by Moe Zhoost
For smooth surface riding, as long as your return chain tension is good you should be ok........
Apparently you have never ridden in my area. For all practical purposes there are no smooth surfaces.
HillRider is offline  
Old 06-17-19, 09:03 AM
  #16  
Moe Zhoost
Half way there
 
Moe Zhoost's Avatar
 
Join Date: Sep 2015
Location: North Carolina
Posts: 2,955

Bikes: Many, and the list changes frequently

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 879 Times in 526 Posts
Originally Posted by HillRider
Apparently you have never ridden in my area. For all practical purposes there are no smooth surfaces.
Actually I have, and agree with you about the condition of some (most?) of the roads around PGH. Are any improvements progressing?
Moe Zhoost is offline  
Old 06-17-19, 09:08 AM
  #17  
Moe Zhoost
Half way there
 
Moe Zhoost's Avatar
 
Join Date: Sep 2015
Location: North Carolina
Posts: 2,955

Bikes: Many, and the list changes frequently

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 879 Times in 526 Posts
Originally Posted by fietsbob
Cyclocross racing single ring, uses regular chain rings too , simply has other chain retention devices
such as added outer ring guards .. polished, anodized or carbon fiber..

narrow-wide is just today's trend.. as is gravel racing in the farmlands..
>>>
Chainring guards, chain guides, clutch derailleurs, narrow wide rings ... they are all solutions to the problem. I'm not sure that trendiness is a negative thing in this context, though, because trends seem to follow effective design for drivetrains. Not so much for other things like bike lights, though.
Moe Zhoost is offline  
Old 06-18-19, 03:44 AM
  #18  
Teamprovicycle
Banned
 
Join Date: Mar 2018
Location: Providence
Posts: 733

Bikes: Specialized tarmac sl2 giant tcx zero

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 319 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
I had a usa made ring, chain dropped every day almost, I wouldn't worry about a narrow wide as much as getting a clutch rear mech , you can use a normal ring just use the front mech and limit screw it in place . I have a 1x I use a sram red inner ring mounted on the out side if a rival crank , haven't dropped a chain once , sram gx shifter mech with the 15 dollar sram chain 😶
Teamprovicycle is offline  
Old 06-18-19, 05:15 AM
  #19  
JonathanGennick 
Senior Member
 
JonathanGennick's Avatar
 
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131

Bikes: Priority 600, Priority Continuum, Devinci Dexter

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times in 37 Posts
Originally Posted by Teamprovicycle
...you can use a normal ring just use the front mech and limit screw it in place .
Friend of mine does exactly that. It works well for him. He's got a narrow/wide ring, but lacks a clutch derailleur and needs the front mech to prevent the chain from dropping. It's a good solution.
JonathanGennick is offline  
Old 06-18-19, 10:46 AM
  #20  
Andiroo99
Brit Rider
Thread Starter
 
Andiroo99's Avatar
 
Join Date: Jun 2011
Location: DC
Posts: 196

Bikes: Mercian King of Mercia (1983), Balance XR-550 (1993), Surly Cross Check, 1948 Condor British steel lightweight.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Hi All

Thanks for this. Helpful. The original question was less cost driven than understanding what is / is not possible.

I like the look of the Hope 1x narrow / wide rings. I presume they licensed this from SRAM so it works well?

Arb
Andiroo99 is offline  
Old 06-18-19, 11:56 AM
  #21  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
IDK who got the Patent licence first , but You know, its possible to find that thru the Patent offices..
fietsbob is offline  
Old 06-18-19, 01:22 PM
  #22  
well biked
Senior Member
 
well biked's Avatar
 
Join Date: Jul 2005
Posts: 7,486
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 159 Times in 88 Posts
Originally Posted by Andiroo99
Hi All

T
I like the look of the Hope 1x narrow / wide rings. I presume they licensed this from SRAM so it works well?

Arb
I doubt it, regarding it being licensed from SRAM. SRAM's trademarked name for chain-retaining chainrings is "X-Sync," I don't think the Hope rings use that terminology. It doesn't matter, a good quality narrow-wide ring from a reputable manufacturer such as Hope should work great.
well biked is offline  
Old 06-19-19, 12:29 PM
  #23  
El Gato27
Senior Member
 
Join Date: Dec 2014
Location: Texas
Posts: 230

Bikes: '88 Peugot 12 spd road bike, Nishiki hybrid, JC Penney 10 spd

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 61 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I recently converted an older Specialized Sirrus to 1x7 using an old Sugino chainring (flat). Only one chain drop in ~500 miles, courtesy of my own foot getting in the way.
El Gato27 is offline  
Old 06-19-19, 02:44 PM
  #24  
t_e_r_r_y
Senior Member
 
t_e_r_r_y's Avatar
 
Join Date: Apr 2019
Location: oregon coast
Posts: 235
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Liked 76 Times in 44 Posts
when i converted to 1x10, i went with a clutched deore xp rd because i'm using a campy chorus crankset and finding a narrow/wide sprocket with the right bdc was proving to be pretty hard. i did eventually find someone making them, but i've been using the stock inner 39t campy ring this whole time and haven't had a dropped chain yet, so i haven't been able to justify spending more money on a ring yet.


t_e_r_r_y is offline  
Old 10-01-21, 09:53 AM
  #25  
tendency 
Full Member
 
Join Date: Jul 2008
Posts: 469
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 236 Post(s)
Liked 170 Times in 104 Posts
zombie thread i know just my .02 cents for posterity sake: when i was testing out my 1x10 i ran a standard dura ace 7402 40T chainring and never had any issue with chain slip. regular old 7700 rear derailleur as well (road bike of course).
tendency is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jambon
Bicycle Mechanics
14
09-06-18 09:58 PM
Hoopdriver
General Cycling Discussion
8
05-01-18 03:37 AM
born2pdl
Bicycle Mechanics
5
07-31-17 10:06 PM
Meper
Road Cycling
11
04-28-13 09:30 AM
jkimballcook
Bicycle Mechanics
4
04-02-13 11:17 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.