Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Replace the chain - go by chain checker tool or mileage?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Replace the chain - go by chain checker tool or mileage?

Old 07-30-19, 10:28 PM
  #1  
NoWhammies
Senior Member
Thread Starter
 
NoWhammies's Avatar
 
Join Date: Jul 2017
Location: Pacific Northwest
Posts: 1,993

Bikes: Argon 18 Gallium, BH G7, Rocky Mountain Instinct C70

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Liked 512 Times in 306 Posts
Replace the chain - go by chain checker tool or mileage?

I've been using a chain checker tool (similar to the one in the image below) to determine when I need to change my chain. Right now my tool is telling me the chain is at 50% life/wear.

Yet when I do a search online re: when to replace a change, I'm getting mileage/distance recommendations. Frequently in the 2,000 to 3,000mi range (https://www.bicycling.com/repair/a20...ur-bike-chain/). This seems kind of young/early to me.

So I'm torn. What's best practices? Replace the chain by distance or when the chain checker tool says the chain is at 75% life?

NoWhammies is offline  
Old 07-30-19, 10:57 PM
  #2  
DiabloScott
It's MY mountain
 
DiabloScott's Avatar
 
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 9,984

Bikes: Klein, Merckx, Trek

Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4297 Post(s)
Liked 2,929 Times in 1,589 Posts
Join Date: Jul 2017
Location: Vancouver, BC
Posts: 857
Two years, 857 posts, and you've never seen a chain checker thread?
DiabloScott is offline  
Likes For DiabloScott:
Old 07-30-19, 11:05 PM
  #3  
Bill Kapaun
Really Old Senior Member
 
Bill Kapaun's Avatar
 
Join Date: Feb 2007
Location: Mid Willamette Valley, Orygun
Posts: 13,795

Bikes: 87 RockHopper,2008 Specialized Globe. Both upgraded to 9 speeds.

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1763 Post(s)
Liked 1,219 Times in 843 Posts
Chain Checkers are known for showing more wear than you actually have.
I finally got a worn enough chain to use my PARK tool.
It barely fit at .5%.
I took the chain off and measured a 3' section with my scale.
3/32" or .25%.
Is your CC "calibrated"?
Bill Kapaun is offline  
Old 07-31-19, 12:17 AM
  #4  
3alarmer 
Friendship is Magic
 
3alarmer's Avatar
 
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,898

Bikes: old ones

Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26212 Post(s)
Liked 10,180 Times in 7,062 Posts
Originally Posted by NoWhammies

So I'm torn. What's best practices?
...best practice is to measure chain wear with a steel ruler between the pin centers for 12 double links. Should be 12 inches. Chains ought to be replaced before they start to wear the teeth on chainrings and cogs, which are more expensive than chains to replace (mostly).
3alarmer is offline  
Likes For 3alarmer:
Old 07-31-19, 04:34 AM
  #5  
Brocephus
Professional amateur
 
Brocephus's Avatar
 
Join Date: May 2018
Location: Ga.
Posts: 665

Bikes: Does a Big Wheel count ?

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 295 Post(s)
Liked 133 Times in 89 Posts
If the chain is worn, or "stretched" to it's limit, then "distance" is irrelevant, it's just an average amount of life a chain will have. How hard you ride, and how clean or dirty you keep the chain, will affect its period of service. If the chain is still ok, then how far it's ridden isn't necessarily a hard-fast rule, it just puts you in the ballpark.
And, as stated above, I'd go with measuring it, versus using a chain checker. 12" on a ruler or a tape measure is going to be 100% consistent, unlike the various models of chain checkers.
Brocephus is offline  
Old 07-31-19, 05:32 AM
  #6  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,091 Times in 722 Posts
Absolutely use a ruler, my opinion is that chain checkers exist to help sell more chains.
dsbrantjr is offline  
Likes For dsbrantjr:
Old 07-31-19, 06:17 AM
  #7  
Phil_gretz
Zip tie Karen
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006

Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times in 806 Posts
Steel ruler.
Phil_gretz is offline  
Old 07-31-19, 06:31 AM
  #8  
joesch
Senior Member
 
joesch's Avatar
 
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 1,713

Bikes: 83 Colnago Super, 87 50th Daccordi, 79 & 87 Guerciotti's, 90s DB/GT Mtn Bikes, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 06 DbyLS TI, 08 Lemond Filmore FG SS, 12 Cervelo R3, 20/15 Surly Stragler & Steamroller

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 596 Post(s)
Liked 764 Times in 489 Posts
Case in point for YMMV == Your Mileage May Vary
Inspect chain and measure !
joesch is online now  
Old 07-31-19, 06:35 AM
  #9  
eja_ bottecchia
Senior Member
 
eja_ bottecchia's Avatar
 
Join Date: Jul 2010
Posts: 5,793
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 462 Times in 292 Posts
Digital calipers.
eja_ bottecchia is offline  
Old 07-31-19, 08:22 AM
  #10  
silverado8405
Senior Member
 
Join Date: Sep 2014
Location: Wisconsin
Posts: 86

Bikes: 2007 Trek 820, 2014 Fuji Gran Fondo 2.1

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Liked 10 Times in 9 Posts
https://www.sheldonbrown.com/chain-wear.html

Scroll down to the section titled Measuring Chain Wear to find all you’d ever want to know about when a chain is bad and how to gage it based on what you’re measuring with the tape measure. Keep in mind you’ll need a tape/ruler longer than 12” to be able to measure the wear.
silverado8405 is offline  
Old 07-31-19, 08:23 AM
  #11  
NoWhammies
Senior Member
Thread Starter
 
NoWhammies's Avatar
 
Join Date: Jul 2017
Location: Pacific Northwest
Posts: 1,993

Bikes: Argon 18 Gallium, BH G7, Rocky Mountain Instinct C70

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Liked 512 Times in 306 Posts
Steel ruler it is! @3alarmer thanks for the detailed explanation

@Bill Kapaun There isn't much to calibrate on my chain checker. It's just a metal 'ruler' that slots in to the spaces of the chain links.
NoWhammies is offline  
Old 07-31-19, 08:51 AM
  #12  
pdlamb
Senior Member
 
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,826

Bikes: Fuji Touring, Novara Randonee

Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2568 Post(s)
Liked 1,889 Times in 1,185 Posts
+1 on the steel ruler. Replace at 12-1/16" per 12 full links, or 12-3/64" if you've got a week-long ride coming up.

Last edited by pdlamb; 07-31-19 at 11:18 AM. Reason: Fixed upper limit (3/64" over).
pdlamb is offline  
Old 07-31-19, 09:19 AM
  #13  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,790

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 125 Post(s)
Tagged: 0 Thread(s)
Quoted: 4731 Post(s)
Liked 3,832 Times in 2,492 Posts
Originally Posted by 3alarmer
...best practice is to measure chain wear with a steel ruler between the pin centers for 12 double links. Should be 12 inches. Chains ought to be replaced before they start to wear the teeth on chainrings and cogs, which are more expensive than chains to replace (mostly).
I replace chains at 12 - 1/6". But I do not throw them away. I put them in a plastic bag and label them with that length. When new chains no longer run smoothly, I use those 12 - 1/16" chains, replacing them at 12 - 3/32" with other 12 - 1/16" chains until shifting deteriorates. Then it's time for all new cogs and rings. That takes many thousands of miles. And it's probably high time to upgrade to the next number of cogs.

My TiCycles was set up 9-speed in '08. 3 cassettes for two wheels. 12,000 miles. New chains go on just fine.

Steel tape measures work really well. (I typically start at 10" so a stretched chain might be showing 22 - 3/32") Measure front of pin to front of pin.

Ben
79pmooney is offline  
Old 07-31-19, 11:50 AM
  #14  
Bill Kapaun
Really Old Senior Member
 
Bill Kapaun's Avatar
 
Join Date: Feb 2007
Location: Mid Willamette Valley, Orygun
Posts: 13,795

Bikes: 87 RockHopper,2008 Specialized Globe. Both upgraded to 9 speeds.

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1763 Post(s)
Liked 1,219 Times in 843 Posts
Originally Posted by NoWhammies
Steel ruler it is! @3alarmer thanks for the detailed explanation

@Bill Kapaun There isn't much to calibrate on my chain checker. It's just a metal 'ruler' that slots in to the spaces of the chain links.
My point was to calibrate your checker from experience.I now know that IF my checker "just fits", that my chain is worn .25%. NOT .5%.
Some day I'll learn what the .75% mark really means. Maybe .5%?
Bill Kapaun is offline  
Old 07-31-19, 12:05 PM
  #15  
davidad
Senior Member
 
Join Date: Feb 2009
Posts: 6,660
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 171 Times in 138 Posts
There are only three chain checkers that are reliable. Two from shimano and one from Pedro's. https://www.amazon.com/Pedros-Chain-...ateway&sr=8-10
I have the Pedro's because of the price. It is as reliable as a ruler.

https://www.ebay.com/itm/302818236459

https://www.ebay.com/itm/283533481109

Info on the rest. https://www.pardo.net/bike/pic/fail-0...easuring-tools
davidad is offline  
Likes For davidad:
Old 07-31-19, 12:26 PM
  #16  
TimothyH
- Soli Deo Gloria -
 
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,782

Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix

Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 735 Times in 468 Posts
FWIW, calibration only tells you how accurate (closeness to the truth) and precise (repeatable) a measuring device is. Calibration in and of itself doesn't actually change how any tool measures.

One can also repair or service a tool so that it is more accurate and precise but that isn't really part of calibration. Service often goes along with calibration but it isn't part of what calibration is.


-Tim-
TimothyH is offline  
Old 07-31-19, 01:39 PM
  #17  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,431
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3629 Post(s)
Liked 5,297 Times in 2,690 Posts
That is correct, though I've noticed that dictionaries will often include the second step of adjusting or rectifying as part of the definition. It seems that as our language evolves it becomes less precise.
shelbyfv is offline  
Old 07-31-19, 01:39 PM
  #18  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,196

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1075 Post(s)
Liked 551 Times in 441 Posts
Most chain checkers add roller wear to actual elongation, so they exaggerate the wear. When a precision steel rule costs so little, why use anything else? One thing I first found out with campy 10 chains is they can have severe roller and side clearance wear, but show little elongation. I have ridden enough on the 11 or 12 speed chains to know if that's still the case.

If you really want maximum chain and cassette life, alternate the use of 3 to 4 chains, so you're never putting a new chain on worn sprockets. I plan to resume that technique with 2 bikes that have the new Chorus 12 components. All it takes is few hundred miles on a chain to a avoid new-chain skip. I'll also be trying chains from sram, KMC and campy. The new axs chain works.
DaveSSS is offline  
Old 07-31-19, 01:47 PM
  #19  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,431
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3629 Post(s)
Liked 5,297 Times in 2,690 Posts
I'm an outlier because the cheap Park tool is good enough for me. I'm easy on my gear and don't obsess over getting a couple of thousand more miles from a chain. All those little numbers on a ruler....
shelbyfv is offline  
Old 07-31-19, 02:04 PM
  #20  
noglider 
aka Tom Reingold
 
noglider's Avatar
 
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,639

Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem

Mentioned: 507 Post(s)
Tagged: 0 Thread(s)
Quoted: 7251 Post(s)
Liked 2,322 Times in 1,357 Posts
I don't know if there is a "best practice." If you replace prematurely, you're wasting money and resources. If you replace too late, you're wearing out your cassette and possibly pedaling harder than you need to. The trick is to find a decent balance between the two. I like to err on the side of wastefulness. But I don't usually use a checker, so I can't say at what metric I replace a chain. Take a guess. You don't have much choice.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog

“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author

Please email me rather than PM'ing me. Thanks.
noglider is offline  
Old 07-31-19, 02:11 PM
  #21  
San Rensho 
Senior Member
 
Join Date: Oct 2005
Posts: 5,820
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 383 Post(s)
Liked 133 Times in 91 Posts
Originally Posted by eja_ bottecchia
Digital calipers.
Yep, and vernier calipers work just fine too, mine measures to .1mm. In fact, I think calipers are more accurate measure of the chain wear. I always measure the new chain right after I've installed it and the variances in different chain brands chains can be up to .3mm over the legnth of chain that I measure. So I calculate the wear limit based on the actual legnth of the chain, not theoretically what its supposed to be.
__________________
Il faut de l'audace, encore de l'audace, toujours de l'audace

1980 3Rensho-- 1975 Raleigh Sprite 3spd
1990s Raleigh M20 MTB--2007 Windsor Hour (track)
1988 Ducati 750 F1
San Rensho is offline  
Likes For San Rensho:
Old 07-31-19, 05:10 PM
  #22  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,196

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1075 Post(s)
Liked 551 Times in 441 Posts
If digital calipers are used between rollers, you are adding roller wear to true elongation and roller wear can be quite large.

Use a precision machinist's rule and place one end at the edge of a pin. When the pin at the other end is half exposed, you have reached .5 percent elongation.
DaveSSS is offline  
Old 07-31-19, 05:32 PM
  #23  
DOS
Senior Member
 
DOS's Avatar
 
Join Date: Feb 2008
Location: Arlington, VA USA
Posts: 2,108
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 253 Post(s)
Liked 69 Times in 56 Posts
Originally Posted by 3alarmer
...best practice is to measure chain wear with a steel ruler between the pin centers for 12 double links. Should be 12 inches. Chains ought to be replaced before they start to wear the teeth on chainrings and cogs, which are more expensive than chains to replace (mostly).
Why does the ruler have to be steel?
DOS is offline  
Old 07-31-19, 06:10 PM
  #24  
DaveSSS 
Senior Member
 
Join Date: Sep 2008
Location: Loveland, CO
Posts: 7,196

Bikes: Cinelli superstar disc, two Yoeleo R12

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1075 Post(s)
Liked 551 Times in 441 Posts
Originally Posted by DOS
Why does the ruler have to be steel?
Anything else is cheap crap that won't last. You want a thin machinist's rule. Starret brand is the best.
DaveSSS is offline  
Old 07-31-19, 06:13 PM
  #25  
GamblerGORD53
Senior Member
 
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,445

Bikes: 2013 Custom SA5w / Rohloff Tourster

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1217 Post(s)
Liked 311 Times in 238 Posts
Neither. Pffft
GamblerGORD53 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.