Cherubim Sportif fillet-brazed
#1
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Cherubim Sportif fillet-brazed
Another Cherubim has found its way into my hands. I've been loving my recently-completed 1980ish Cherubim Super Tourer so I found a "V" model also around 1980ish. While the Super Tourer was the 650B randonneur model, the "V" was a 700C sportif. It could be specced with sidepulls or centerpulls - this particular frame has braze-ons for mounting centerpulls directly, and clearance for about 700x33mm tires. It's fillet-brazed. I believe the dropouts were made in-house by Cherubim. This frame was advertised as new old stock, which it looks to be.
After chasing the BB threads and sanding the paint off the centerpull bosses, I'll start assembly with some MAFAC Competition brakes and a Maxicar/Mavic wheelset from around 1980. The rest of the build is up in the air.
After chasing the BB threads and sanding the paint off the centerpull bosses, I'll start assembly with some MAFAC Competition brakes and a Maxicar/Mavic wheelset from around 1980. The rest of the build is up in the air.
Likes For TenGrainBread:
#2
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,030
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4507 Post(s)
Liked 6,373 Times
in
3,665 Posts
Another Cherubim has found its way into my hands. I've been loving my recently-completed 1980ish Cherubim Super Tourer so I found a "V" model also around 1980ish. While the Super Tourer was the 650B randonneur model, the "V" was a 700C sportif. It could be specced with sidepulls or centerpulls - this particular frame has braze-ons for mounting centerpulls directly, and clearance for about 700x33mm tires. It's fillet-brazed. I believe the dropouts were made in-house by Cherubim. This frame was advertised as new old stock, which it looks to be.
After chasing the BB threads and sanding the paint off the centerpull bosses, I'll start assembly with some MAFAC Competition brakes and a Maxicar/Mavic wheelset from around 1980. The rest of the build is up in the air.
After chasing the BB threads and sanding the paint off the centerpull bosses, I'll start assembly with some MAFAC Competition brakes and a Maxicar/Mavic wheelset from around 1980. The rest of the build is up in the air.
#3
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,793
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1390 Post(s)
Liked 1,322 Times
in
835 Posts
Pardon my ignorance, but I have never heard of the marque. That looks like a superb touring bike.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For gomango:
#5
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,508
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2420 Post(s)
Liked 4,381 Times
in
2,090 Posts
That finish work is so good, it is out of this world.
Plus, that thin paint just adds to the "OMG" factor when you realize how absolutely perfect everything underneath has to be for no flaws to show up at the edges.
Also in awe of the multi-tabbed dropout. Downright brilliant.
-Kurt
Plus, that thin paint just adds to the "OMG" factor when you realize how absolutely perfect everything underneath has to be for no flaws to show up at the edges.
Also in awe of the multi-tabbed dropout. Downright brilliant.
-Kurt
#6
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Much like Jack Taylor Cycles, the marque was started by 3 brothers (Konno) who were competitive cyclists in Japan in the 50s. The business was started in 1964, named by their mother who was a devout Christian. They had an early success when they were chosen to supply frames for the Japanese Olympic team in 1968. The Konno brothers later split into Cherubim, 3Rensho, and Miyuki. Cherubim specialized in racing and French-style cyclotouring bikes through the decades and is still around, run by the son of one of the founding Konno brothers. Now they mostly build road racers and Keirin bikes but still periodically make touring bikes.
Last edited by TenGrainBread; 11-29-19 at 06:20 PM.
Likes For TenGrainBread:
#8
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,844
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2924 Post(s)
Liked 2,921 Times
in
1,489 Posts
Great looking frame
Thanks for the information
Thanks for the information
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Last edited by Bianchigirll; 11-29-19 at 07:47 PM.
#9
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
That is a seriously cool bike - love the concept of wide tire sports tourer with direct mount center pulls.
#10
Newbie
Another stunner TenGrainBread can't wait to see it all build up!
#12
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Build list:
Wheels: 700C Mavic MA2 rims laced to Maxicar hubs
Freewheel: Maillard 700 Course 6 speed
Chain: Izumi 6 speed
Tires: Soma Supple Vitesse 33mm
Headset: Tange Levin Royal
Stem: SR Royal
Handlebars: Atax Philippe Professional
Brake levers: Suntour Superbe
Brakes: MAFAC Competition braze-on centerpulls
Shifters: Suntour Cyclone 1st gen
Rear derailleur: Suntour Cyclone 1st gen short cage
Front derailleur: Suntour Superbe Pro
Crankset: TA Pro 3 pin with Stronglight BIS rings (48-38)
Seatpost: American Classic titanium
Saddle: Brooks Pro titanium
Wheels: 700C Mavic MA2 rims laced to Maxicar hubs
Freewheel: Maillard 700 Course 6 speed
Chain: Izumi 6 speed
Tires: Soma Supple Vitesse 33mm
Headset: Tange Levin Royal
Stem: SR Royal
Handlebars: Atax Philippe Professional
Brake levers: Suntour Superbe
Brakes: MAFAC Competition braze-on centerpulls
Shifters: Suntour Cyclone 1st gen
Rear derailleur: Suntour Cyclone 1st gen short cage
Front derailleur: Suntour Superbe Pro
Crankset: TA Pro 3 pin with Stronglight BIS rings (48-38)
Seatpost: American Classic titanium
Saddle: Brooks Pro titanium
#13
Senior Member
Join Date: Dec 2005
Posts: 17,143
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,634 Times
in
2,599 Posts
Beautiful bike! Love those drilled rings on the TA 3-pin crankset.
#14
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
Very pretty! But it needs silver fenders, doesn't it? Or is that just me....
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.
#15
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,827 Times
in
1,995 Posts
I purchased a pair of the Soma tires too- I have yet to install them- look good.
do the brazed on mounts present the brakes farther forward?
windering about the cable to the outside routing at the yoke.
do the brazed on mounts present the brakes farther forward?
windering about the cable to the outside routing at the yoke.
#16
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,508
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2420 Post(s)
Liked 4,381 Times
in
2,090 Posts
Gorgeous - and I second Neal's comment about the 3-pin TA with the Stronglight rings. A really nice touch.
Funny, rhm - I found some hammered 700C fenders at the LBS today; instantly thought of them when I saw this build. They're super narrow though.
-Kurt
Funny, rhm - I found some hammered 700C fenders at the LBS today; instantly thought of them when I saw this build. They're super narrow though.
-Kurt
#17
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 509
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 324 Times
in
210 Posts
That is freakin' gorgeous. And it pushes me just that little bit closer towards a fillet-brazed frame someday. Nice.
#18
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
Well, that’s beautiful...
#19
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
I don't think the brakes are much farther forward than the standard mount with the stirrup/adapter plate.
Regarding the straddle yoke- I reversed the hardware so the cable could be clamped on the opposite side of the straddle. Just makes installation and adjustment slightly easier because the straddle and brake cable aren't competing for space behind the yoke. Saw this trick somewhere, don't remember.
Likes For TenGrainBread:
#21
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,827 Times
in
1,995 Posts
I've used these Soma SV tires in wider widths before and they're great.
I don't think the brakes are much farther forward than the standard mount with the stirrup/adapter plate.
Regarding the straddle yoke- I reversed the hardware so the cable could be clamped on the opposite side of the straddle. Just makes installation and adjustment slightly easier because the straddle and brake cable aren't competing for space behind the yoke. Saw this trick somewhere, don't remember.
I don't think the brakes are much farther forward than the standard mount with the stirrup/adapter plate.
Regarding the straddle yoke- I reversed the hardware so the cable could be clamped on the opposite side of the straddle. Just makes installation and adjustment slightly easier because the straddle and brake cable aren't competing for space behind the yoke. Saw this trick somewhere, don't remember.
This is with Mafac's where the straddle wire is also essentially the quick release to open the caliper for wheel removal.
The downside of Mafac is the cable pinch bolt can rotate, and must be secured when tightening the bolt... Weinmann and Dia-Compe had cable bolts that have don't twist, the job is a bit easier.
#22
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
That is such a nice bike all around. I could look at it all day.
What's that bar tape? It looks thick, but wider than Newbaum's, or maybe my eyes are playing tricks on me.
What's that bar tape? It looks thick, but wider than Newbaum's, or maybe my eyes are playing tricks on me.