Essential Tools
#26
Generally bewildered
Join Date: Aug 2015
Location: Eastern PA, USA
Posts: 3,037
Bikes: 2014 Trek Domane 6.9, 1999 LeMond Zurich, 1978 Schwinn Superior
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1152 Post(s)
Liked 341 Times
in
251 Posts
I have a long-reach caliper from Harbor Freight which is nice for reaching around stuff like hubs and cassettes: https://www.harborfreight.com/6-in-l...per-63714.html
#27
Very Senior Member
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211
Bikes: Giant Quasar & Fuji Roubaix
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times
in
244 Posts
I never realized that chain whips came in specific chain sizes. I made my own from used chain off my bike so it fits what I ride,
#28
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,341
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,200 Times
in
2,357 Posts
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#29
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,341
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,200 Times
in
2,357 Posts
And a place to keep the bench.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#30
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
If older loose ball and cup/spindle bottom brackets, then a bottom bracket tool with the correct lockring spanner.
If cartridge bottom bracket bearings, then the Shimano splined tool
If external bottom bracket bearings, then the Park tool for them, and some of those require little plastic insert adapters for the smaller size.
Torque wrench
Breaker bars for the size socket wrench drive(s) you use.
vinyl/latex gloves to protect against chemicals and grease
tub of bearing grease
spray can of lithium grease
Shimano cassette lockring splined tool
If cartridge bottom bracket bearings, then the Shimano splined tool
If external bottom bracket bearings, then the Park tool for them, and some of those require little plastic insert adapters for the smaller size.
Torque wrench
Breaker bars for the size socket wrench drive(s) you use.
vinyl/latex gloves to protect against chemicals and grease
tub of bearing grease
spray can of lithium grease
Shimano cassette lockring splined tool
#31
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,545
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5222 Post(s)
Liked 3,576 Times
in
2,340 Posts
got to use my vise & angle grinder to modify a new locking hitch pin for my bike rack cuz the tolerances for fit were too tight. needed to grind off less than 1mm to get it to fit inside the tongue that slides into the.receiver tube. a little surprised cuz the last one I had fit into 2 diff. racks. this new one fit an old rack but not the new rack. so I think the Allen rack spec was off a smidge?
is anyone needs one
Let's Go Aero (SHP 2080 1/2" Silent Hitch Pin with Lock
is anyone needs one
Let's Go Aero (SHP 2080 1/2" Silent Hitch Pin with Lock
Last edited by rumrunn6; 12-06-19 at 07:32 PM.
#32
Junior Member
I went through the same ordeal. Instead of repeating everything that's been said I tried to plan ahead and buy the tools for the jobs I knew I was going to do so I didn't have to wait long to have them available (i.e. 15mm pedal wrench to replace the cheap stock pedals that come on the bike; a torque wrench for carbon fiber). That may not matter if you have a LBS nearby with everything you need.
If you got the itch to buy stuff, get things you'll need down the road like a chain wear indicator or a valve core tool (for tubeless)...once you start using this stuff you'll find out things like, "Crap! My chain wear indicator doesn't show 0.5% wear" so you'll have to go out and buy another one.
If you got the itch to buy stuff, get things you'll need down the road like a chain wear indicator or a valve core tool (for tubeless)...once you start using this stuff you'll find out things like, "Crap! My chain wear indicator doesn't show 0.5% wear" so you'll have to go out and buy another one.
#33
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I went through the same ordeal. Instead of repeating everything that's been said I tried to plan ahead and buy the tools for the jobs I knew I was going to do so I didn't have to wait long to have them available (i.e. 15mm pedal wrench to replace the cheap stock pedals that come on the bike; a torque wrench for carbon fiber). That may not matter if you have a LBS nearby with everything you need.
If you got the itch to buy stuff, get things you'll need down the road like a chain wear indicator or a valve core tool (for tubeless)...once you start using this stuff you'll find out things like, "Crap! My chain wear indicator doesn't show 0.5% wear" so you'll have to go out and buy another one.
If you got the itch to buy stuff, get things you'll need down the road like a chain wear indicator or a valve core tool (for tubeless)...once you start using this stuff you'll find out things like, "Crap! My chain wear indicator doesn't show 0.5% wear" so you'll have to go out and buy another one.
#34
Senior Member
For a long time,I had no need for tools for pulling and pressing cartridge bearings. But now that I have a frame and hubs with pressed in bearings, I have acquired a good puller and press. DIY versions are viable options.
#35
Senior Member
Imo, The most essential tools are a good pump, lube for the chain, a rag and a set of allen keys. From there on out the most essential tools is the one that fit what ever job you are doing on your particular bike. From my experience 90% of maintenance is related to tyres, cables and the chain.
#36
Junior Member
If you want to do everything, you will need a lot of tolls that aren't bicycle specific. My two cents is that there is no point in buying Park for anything not bicycle specific. Vessel screwdrivers that fit JIS screws. SK or Gearwrench (or Husky or Craftsmen for cheaper stuff) for combination wrenches, ratchets and sockets. Bondhus or any of several others for allen and torx wenches. And don't forget used tools. My favorite cable crimper is a pair of ancient Bell System pliers originally intended for linesman to crimp telephone connectors.
#37
Full Member
As an alternative to chain whips I prefer a cog wrench which uses 3 pins to grab the outer 11 or 12 tooth cog in the cassette. These are easier to use but less universal. My cog wrench is a long discontinued Pedro's item with a pedal wrench on the other end which can also save a lot of aggro if you change pedals often.
#38
Junior Member
Join Date: Mar 2007
Location: San Luis Obispo, CA
Posts: 175
Bikes: 1988 Bottecchia Professional (for Eroica), 2011 Ridley Noah ISP (retired), 2020 Soma Fog Cutter (daily commuter), 2021 Ridley Kanzo Adventure (gravel), 2022 Tideace Aero (main road bike).
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Liked 76 Times
in
32 Posts
If you want the bare minimum to work on your bike, take a good visual inventory of everything that you would need to adjust, replace, repair, etc. Make a basic list of just the tools required for regular maintenance, separating out the ones that might only get used once. For higher priced items like headset and BB presses, bearing pullers, crown race setters etc., I like the idea someone suggested of your local non-profit bike kitchen. We have a great one here in SLO and I was able to borrow $300 worth of Park tools that I would have only used once for $5.00.
#39
Senior Member
Don't buy a tool that you may never use.
Every tool I have has been used for a task and has paid for itself, in many cases many times over.
That being said, some tools can pay for themselves after having been used only once (if you don't screw it up).
Every tool I have has been used for a task and has paid for itself, in many cases many times over.
That being said, some tools can pay for themselves after having been used only once (if you don't screw it up).
#40
Senior Member
Join Date: Jun 2019
Location: RVA
Posts: 86
Bikes: 2001 Trek 8000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 53 Post(s)
Liked 28 Times
in
18 Posts
The parks where I live (where all the bike trails are) have a set of tools at a repair station with nice Park tools - and others attached to a cable.
So if I need to do something I don't have a tool for, I just take the bike down to the park and use the tools there.
So if I need to do something I don't have a tool for, I just take the bike down to the park and use the tools there.
Likes For TheLizard:
#42
I think I know nothing.
Join Date: Aug 2004
Location: NE PA
Posts: 709
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 233 Post(s)
Liked 290 Times
in
204 Posts
A couple of good repair manuals, some can be purchased used on Amazon. Of course it limits usefulness with brand new technology.
Essential in my opinion is a quality bottle of either sour mash bourbon or a single malt scotch. Just remember a little goes a long way LOL!
Essential in my opinion is a quality bottle of either sour mash bourbon or a single malt scotch. Just remember a little goes a long way LOL!
Likes For Thomas15:
#43
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,495
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7341 Post(s)
Liked 2,441 Times
in
1,425 Posts
Professional grade Park work stands are nice, but their consumer grade ones aren't all that great. I like Feedback Sports stands better.
I own a pair of Park FFG-2 which is a bit extreme for a home mechanic, but I get a fair bit of use out of them. It's a dropout and fork tip alignment gauge.
I find myself using regular and needlenose pliers fairly often.
I also use a small (6" or 8") adjustable wrench a fair bit. I know this makes some people cringe, so it's controversial.
I own a pair of Park FFG-2 which is a bit extreme for a home mechanic, but I get a fair bit of use out of them. It's a dropout and fork tip alignment gauge.
I find myself using regular and needlenose pliers fairly often.
I also use a small (6" or 8") adjustable wrench a fair bit. I know this makes some people cringe, so it's controversial.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#44
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
They are expensive but extremely well-built. It is hard to understand how useful they are until you put your hands on them.
https://www.kctoolco.com/knipex-86-0...-plastic-grip/
Likes For aggiegrads:
#45
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
I can’t explain how much I love my 7” Knipex Pliers-wrench. I never use adjustable wrenches anymore. They are big enough for threaded headsets, crank lock rings, spline tools, and suspension fork caps, but still small enough to use on 8mm nuts. Work great on 14 and 15mm nutted axles. Bends sheet metal. Holds parts in the grinder. The grip tightens the harder you turn. Grips a hex key anywhere along the shaft.
They are expensive but extremely well-built. It is hard to understand how useful they are until you put your hands on them.
https://www.kctoolco.com/knipex-86-0...-plastic-grip/
They are expensive but extremely well-built. It is hard to understand how useful they are until you put your hands on them.
https://www.kctoolco.com/knipex-86-0...-plastic-grip/
I got one of these a few years ago after hearing about it here on BF, but it hasn't made into the top tier,
particularly not replacing this (lighter & less fussy) 6" crescent wrench:
https://www.amazon.com/dp/B00OVV0JA0...ing=UTF8&psc=1
which is a daily carry.
Being left handed doesn't help as the Knipex adjustment is right handed. Would be great for an auto mechanic, 'tho.
#46
Senior Member
Join Date: Oct 2009
Location: Sherwood, OR
Posts: 1,279
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 309 Times
in
180 Posts
I got one of these a few years ago after hearing about it here on BF, but it hasn't made into the top tier,
particularly not replacing this (lighter & less fussy) 6" crescent wrench:
https://www.amazon.com/dp/B00OVV0JA0...ing=UTF8&psc=1
which is a daily carry.
Being left handed doesn't help as the Knipex adjustment is right handed. Would be great for an auto mechanic, 'tho.
particularly not replacing this (lighter & less fussy) 6" crescent wrench:
https://www.amazon.com/dp/B00OVV0JA0...ing=UTF8&psc=1
which is a daily carry.
Being left handed doesn't help as the Knipex adjustment is right handed. Would be great for an auto mechanic, 'tho.
#47
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,495
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7341 Post(s)
Liked 2,441 Times
in
1,425 Posts
I love working on one-piece cranks, though I've never had one or wanted one for myself.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.