soft hammers,mallets
#1
Senior Member
Thread Starter
soft hammers,mallets
I have to bang my MTB fork to seat it over the new bearings I put on the head set (Cannondale F700) and would like to know what type of hammer to get.Any suggestions?
#2
Senior Member
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639
Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997
Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times
in
31 Posts
Flat scrap of wood, any hammer.
Edit: I assumed you are installing a headset in the head tube. If you are installing the crown race on the fork then read the next post. Sorry if I was confused.
Edit: I assumed you are installing a headset in the head tube. If you are installing the crown race on the fork then read the next post. Sorry if I was confused.
Last edited by jyl; 04-16-15 at 12:53 PM.
#4
Senior Member
You don't want to hit the fork with the bearings in it. Are you trying to seat the bearing cups in the headtube or the crown race on the fork?