Hamit

Hi
Sorry I need your help
I have E-bike which is Run-bike brand
It seems everything working. Display, light..
When I start to cycling 🚴 pedal the motor start for only 1-2 second and cutting out (stops) but the display still works it shows no problem.
And the motor will not work until I let the bike to rest for 5-10 minutes and same things happen???
So what is wrong with it

FREEBIRD1

Not sure what brand or model you have, but it sounds like a pedal assist equipped bike. I would first check the easy things 1. Is the battery fully charged? 2. Make sure all of your wire connections are securely plugged in,

Hamit

yes the battery good and I don’t think that is connecting problem because. It started to work and 1-2 second motor stop and to work again I should wait for 5-10 minutes. Maybe something get warm and after get cold it works??

FREEBIRD1

Check all the wire connections on control cables, sometimes they are routed through the frame. If there is a tech support call them.

Moe Zhoost

Check that your wheel rotation sensor and magnet are aligned. These can easily go awry.

Hamit

thanks . I solved the problem with change the motor controller and now it is good. Thanks again to everyone