Is there a quick, easy way to wash a bike??
#1
Senior Member
Thread Starter
Join Date: May 2013
Location: Victoria, BC, Canada
Posts: 254
Bikes: my bikes: Old: 1965 Schwinn 10 speed, 72 Monshee 12 speed, 77 Norco 12 speed, 95 Trek 850, two Specialized Crosstrails, 2016 Specialized carbon Sirrus. New 2020 Trek FX1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 36 Times
in
14 Posts
Is there a quick, easy way to wash a bike??
...like the title asks, is there a fast and easy way to wash a bike? My wife has a Trek Marlin and has been riding several times a week on a bike path that has a section that is compact dirt, the rest is all paved or compact gravel. Because its been so dry the compact dirt section is coating her bike with dust, it's very fine dust that has gotten into everything. We looked up washing your bike and had a good laugh. We live in an apartment so no bike stand, no place to hose it down, wash it, rinse it, all using multiple buckets, multiple brushes, bike polish, chain washers, etc, etc.
Any thoughts or suggestions would be helpful, thanks.
Any thoughts or suggestions would be helpful, thanks.
Likes For trainchaser:
#2
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
A damp rag, a spray bottle, and a hard floor? Wipe the chain with a rag to get the dirty lube. Maybe the chain rings and jockey wheels too?
Don't over think it.
Don't over think it.
Likes For Unca_Sam:
#3
Senior Member
Join Date: Oct 2013
Location: Oahu, HI
Posts: 1,399
Bikes: 89 Paramount OS 84 Fuji Touring Series III New! 2013 Focus Izalco Ergoride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Likes: 0
Liked 74 Times
in
54 Posts
Inside an apartment? Don't think I would try that, but I have one of those spray bottles sold for watering plants and have it filled with a mix of water and car wash soap. Spray plus some old t-shirts will do the job. Of course it's easier if you have a stand and can remove the wheels, as getting between the wheels and frame / fork is useful, in particular for the back wheel / seat post. I guess if careful you can lie the bike down on the non-drive side with the wheels off and do it that way. Would help to have some cardboard underneath.
scott s.
.
scott s.
.
#4
Senior Member
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 631
Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman, 1980 Trek 414
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 355 Times
in
166 Posts
My goto for gravel dust/dirt buildup is to use an old toothbrush to loosen the material, and an air compressor to blow it away once loosened. A dampened shop rag can then be used to further tidy up any left over dirt or sweat residue on the frame. I then use a chain scrubber with simple green/ water solution to clean the chain and wipe clean the chainrings and deraileur jockey wheels with a rag and similar cleaning solution. Re-lube the drivetrain, clean the disc rotors or rim brake tracks with a rag and rubbing alcohol.
If you can get the bike outside to use an air compressor, this is a quick and tidy job which i usually do in my driveway. If i had to do it inside, the process would be similar, but with a tarp under the frame to catch debris, and without the air compressor to aid in the initial dirt removal which could make quite a mess indoors.
Hope this helps!
If you can get the bike outside to use an air compressor, this is a quick and tidy job which i usually do in my driveway. If i had to do it inside, the process would be similar, but with a tarp under the frame to catch debris, and without the air compressor to aid in the initial dirt removal which could make quite a mess indoors.
Hope this helps!
#6
Senior Member
Join Date: Jan 2010
Posts: 39,352
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18459 Post(s)
Liked 15,709 Times
in
7,385 Posts
No. Take it outside and wash it.
#7
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,434 Times
in
1,187 Posts
I have 2 spray bottles, 1 with 1:10 Simple Green and water and the 2nd with straight Simple Green. Other than the chain I use paper towels and only use a hose after riding in the rain and there's mud everywhere.
Likes For GlennR:
#8
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,489 Times
in
1,286 Posts
I leave the dust on. It's not hurting anything, it's not making a mess and it adds a bit of character to my bikes.
Likes For wolfchild:
#9
Senior Member
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,116
Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 827 Post(s)
Liked 1,967 Times
in
948 Posts
Lysol wipes work well.
In your case I would take it to a self-service handsprayer carwash.
In your case I would take it to a self-service handsprayer carwash.
#10
Senior Member
The bikes my family rides on the beach get hosed down with water after every ride. These bikes require frequent chain and derailleur lubrication.
The bikes I use for basic transportation and trips to the store get wiped off with a damp rag and periodic chain lube.
The (18lb carbon fiber) race bike I use for long distance & club rides probably gets the least maintenance of any of my rides. I clean it with furniture polish and, lubricate it with tiny drops of oil on each pivot point.
The bikes I use for basic transportation and trips to the store get wiped off with a damp rag and periodic chain lube.
The (18lb carbon fiber) race bike I use for long distance & club rides probably gets the least maintenance of any of my rides. I clean it with furniture polish and, lubricate it with tiny drops of oil on each pivot point.
#12
Junior Member
Join Date: Jul 2020
Location: Melbourne, Australia
Posts: 8
Bikes: Trek Emonda SL5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
...like the title asks, is there a fast and easy way to wash a bike? My wife has a Trek Marlin and has been riding several times a week on a bike path that has a section that is compact dirt, the rest is all paved or compact gravel. Because its been so dry the compact dirt section is coating her bike with dust, it's very fine dust that has gotten into everything. We looked up washing your bike and had a good laugh. We live in an apartment so no bike stand, no place to hose it down, wash it, rinse it, all using multiple buckets, multiple brushes, bike polish, chain washers, etc, etc.
Any thoughts or suggestions would be helpful, thanks.
Any thoughts or suggestions would be helpful, thanks.
#13
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,380
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 668 Post(s)
Liked 529 Times
in
355 Posts
Only time my bikes get washed anymore is when it rains.
If your apartment has a parking lot than you can bring down a bucket of soapy water and wash it there.
If your apartment has a parking lot than you can bring down a bucket of soapy water and wash it there.
#14
Senior Member
Join Date: Dec 2007
Location: NWNJ
Posts: 3,704
Bikes: Road bike is a Carbon Bianchi C2C & Grandis (1980's), Gary Fisher Mt Bike, Trek Tandem & Mongoose SS MTB circa 1992.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 722 Post(s)
Liked 353 Times
in
226 Posts
...like the title asks, is there a fast and easy way to wash a bike? My wife has a Trek Marlin and has been riding several times a week on a bike path that has a section that is compact dirt, the rest is all paved or compact gravel. Because its been so dry the compact dirt section is coating her bike with dust, it's very fine dust that has gotten into everything. We looked up washing your bike and had a good laugh. We live in an apartment so no bike stand, no place to hose it down, wash it, rinse it, all using multiple buckets, multiple brushes, bike polish, chain washers, etc, etc.
Any thoughts or suggestions would be helpful, thanks.
Any thoughts or suggestions would be helpful, thanks.
#15
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,979
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1364 Post(s)
Liked 1,684 Times
in
829 Posts
The danger in using a self-serve car wash is the high pressure hose. It will displace the grease from where it is needed, in the hubs, head bracket, bottom bracket, pedals, derailliers, jockey-wheels, etc.
I now prefer a bucket and some rags. I buy cheap bristle-type pot scrubbers from the dollar store to clean gunk off the chain and driveline, then toss 'em.
I now prefer a bucket and some rags. I buy cheap bristle-type pot scrubbers from the dollar store to clean gunk off the chain and driveline, then toss 'em.
Likes For fabio13222:
#17
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,394
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
The danger in using a self-serve car wash is the high pressure hose. It will displace the grease from where it is needed, in the hubs, head bracket, bottom bracket, pedals, derailliers, jockey-wheels, etc.
I now prefer a bucket and some rags. I buy cheap bristle-type pot scrubbers from the dollar store to clean gunk off the chain and driveline, then toss 'em.
I now prefer a bucket and some rags. I buy cheap bristle-type pot scrubbers from the dollar store to clean gunk off the chain and driveline, then toss 'em.
Yep --
I do use a carwash - I just don't spray directly at my suspension pivot points or bearing areas --- instead I use the carwash to get the heavy dirt off, then use a rage around those areas ---- WD-40 gets used a lot too for bike washing to spray off the cassette, - then a quality lube
#18
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,442
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,010 Times
in
1,934 Posts
no quick method for a good wash.
Just wipe it down with lint free dry cloth & wipe the chain down after each ride. Once in a while, give it a real wash & lube. If I am riding a lot in a short period, that is what works for me for my carbon bicycle.
Just wipe it down with lint free dry cloth & wipe the chain down after each ride. Once in a while, give it a real wash & lube. If I am riding a lot in a short period, that is what works for me for my carbon bicycle.
__________________
-Oh Hey!
-Oh Hey!
#19
Senior Member
Join Date: Jul 2017
Location: Pacific Northwest
Posts: 1,992
Bikes: Argon 18 Gallium, BH G7, Rocky Mountain Instinct C70
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Liked 512 Times
in
306 Posts
Personally I would not wash my bike inside. Too much road grime, oil, dirt, small rocks, etc. that can come off and stick/coat nice surfaces like couches and kitchen tables. I would to my best to clean the bike outside wherever possible.
Likes For NoWhammies:
#20
Senior Member
Join Date: Jan 2005
Location: LF, APMAT
Posts: 2,752
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 624 Post(s)
Likes: 0
Liked 397 Times
in
226 Posts
Generally, I just wipe off my bikes with a damp rag and then lube as needed. The only time I ever needed to hose it off was one day when a bunch of wet oak pollen got all over my bike. Does your apartment have any outside spigots?
#21
Senior Member
Join Date: Jan 2010
Posts: 39,352
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18459 Post(s)
Liked 15,709 Times
in
7,385 Posts
Yeah. I don't see why this is so difficult to figure out. When I was doing possibly my most riding I lived in an appartment. Almost 9 years in the same place. No access to a hose. No apartment complex parking lot of lawn. A realy big city apartment with just a sidewalk. I would bring out a big bucket of water with a small amount of soap and clean the frame, wheels, etc., with a large sponge. If I needed to "hose" it off I would use filled water bottles. Chain cleaning also took place outside. These days I have a house with a back deck and a hose. I would never dream of cleaning the bike inside.
#22
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,390
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6232 Post(s)
Liked 4,239 Times
in
2,377 Posts
The danger in using a self-serve car wash is the high pressure hose. It will displace the grease from where it is needed, in the hubs, head bracket, bottom bracket, pedals, derailliers, jockey-wheels, etc.
I now prefer a bucket and some rags. I buy cheap bristle-type pot scrubbers from the dollar store to clean gunk off the chain and driveline, then toss 'em.
I now prefer a bucket and some rags. I buy cheap bristle-type pot scrubbers from the dollar store to clean gunk off the chain and driveline, then toss 'em.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#23
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,979
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1364 Post(s)
Liked 1,684 Times
in
829 Posts
Yep --
I do use a carwash - I just don't spray directly at my suspension pivot points or bearing areas --- instead I use the carwash to get the heavy dirt off, then use a rage around those areas ---- WD-40 gets used a lot too for bike washing to spray off the cassette, - then a quality lube
I do use a carwash - I just don't spray directly at my suspension pivot points or bearing areas --- instead I use the carwash to get the heavy dirt off, then use a rage around those areas ---- WD-40 gets used a lot too for bike washing to spray off the cassette, - then a quality lube
Not really...especially on modern bicycles with sealed bearings. The GCN guys did a test with a power washer where then directed the spray right at the bearings for 5 minutes and saw no penetration. I wouldn't go that far but with just a little cautious use, a car wash is perfect acceptable.
#24
Senior Member
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,888
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1463 Post(s)
Liked 1,487 Times
in
871 Posts
I use self-service spray car washes to clean bikes after CX races, and during the winter months when my outside hoses are put away.
I bring a chain cleaner like this: Park Tool Chain Cleaner and some de-greaser in a spray bottle. I run the chain through it a few times, then spray on some degreaser and brush off any gunk or mud from the rest of the drivetrain, then just use the car-wash spray soap and a sponge to clean up the rest of the bike, rinse and dry off with a towel. I avoid spraying high pressure right at the bearings and drivetrain, but as others have noted it's probably not really an issue.
I'll re-lube the drivetrain once I get home and it's had a chance to dry off.
I bring a chain cleaner like this: Park Tool Chain Cleaner and some de-greaser in a spray bottle. I run the chain through it a few times, then spray on some degreaser and brush off any gunk or mud from the rest of the drivetrain, then just use the car-wash spray soap and a sponge to clean up the rest of the bike, rinse and dry off with a towel. I avoid spraying high pressure right at the bearings and drivetrain, but as others have noted it's probably not really an issue.
I'll re-lube the drivetrain once I get home and it's had a chance to dry off.