Zipp vs Roval Wheels
#1
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Long Island
Posts: 664
Bikes: 2017 Tarmac Pro, 2014 S-Works Tarmac, 2011 Trek Madone 6.2, 2014 Trek Madone 5.9 & 2009 Specialized Hardtail
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Zipp vs Roval Wheels
if I wanted to swap Roval wheels from 2014 and 2016 with new zipps could I without issue?
dont want to have to keep making adjustments to bike to swap between wheels
if I do have to adjust what has to be tweaked?
dont want to have to keep making adjustments to bike to swap between wheels
if I do have to adjust what has to be tweaked?
#4
member
Disc or rim? What bike? Specialized used a proprietary SCS hub on Roval wheels for their early disc bikes. You would need to replace a hanger if that is the case.
If those are rim wheels, you should be able to switch them without any issues.
If those are rim wheels, you should be able to switch them without any issues.
#5
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
^^^ This
If you are buying complete wheels it will be an issue. If you want to build wheels you can use a hub designed specifically for these bikes.
If you are buying complete wheels it will be an issue. If you want to build wheels you can use a hub designed specifically for these bikes.
#6
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Long Island
Posts: 664
Bikes: 2017 Tarmac Pro, 2014 S-Works Tarmac, 2011 Trek Madone 6.2, 2014 Trek Madone 5.9 & 2009 Specialized Hardtail
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Rim brakes on rovals that are 2-4 years old
zipps would be new
so the hubs are different widths?
meaning I would have to adjust brake width?
anything else to adjust?
zipps would be new
so the hubs are different widths?
meaning I would have to adjust brake width?
anything else to adjust?
#7
Senior Member
Join Date: Sep 2008
Posts: 781
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 479 Post(s)
Liked 277 Times
in
156 Posts
Why would the width of the hub impact the brakes? If the rims are the same width, your brakes won't need any adjustment. If the hubs are different widths, you'll likely need adjust the derailleur.
#8
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
Adjusting brake pads is sop.
#9
member
The hub width is only different on Disc brake equipped bike/wheels.
Since you have rim brakes, there is no difference, you will be able to switch your wheels back and forth. The only (minor) thing might be rim width difference, affecting your brake cable length, but that is a very simple on-the-fly adjustment.
Since you have rim brakes, there is no difference, you will be able to switch your wheels back and forth. The only (minor) thing might be rim width difference, affecting your brake cable length, but that is a very simple on-the-fly adjustment.
#11
I eat carbide.
Join Date: Jan 2006
Location: Elgin, IL
Posts: 21,627
Bikes: Lots. Van Dessel and Squid Dealer
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1325 Post(s)
Liked 1,306 Times
in
560 Posts
Sometimes you luck out. Sometimes you don't.
If full rim brake then you might have to adjust brakes depending on the rim widths. Most I know run the narrow width with the brake quick release cam closed and then the wide with it open.
The only other adjustment is shifting. You may need to make a small barrel adjustment on the rear derail. If the difference is large you may have a small issue with limits but doubtful.
If full rim brake then you might have to adjust brakes depending on the rim widths. Most I know run the narrow width with the brake quick release cam closed and then the wide with it open.
The only other adjustment is shifting. You may need to make a small barrel adjustment on the rear derail. If the difference is large you may have a small issue with limits but doubtful.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels
Podcast - YouTube Channel
Video about PSIMET Wheels
#12
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
The hub width is only different on Disc brake equipped bike/wheels.
Since you have rim brakes, there is no difference, you will be able to switch your wheels back and forth. The only (minor) thing might be rim width difference, affecting your brake cable length, but that is a very simple on-the-fly adjustment.
Since you have rim brakes, there is no difference, you will be able to switch your wheels back and forth. The only (minor) thing might be rim width difference, affecting your brake cable length, but that is a very simple on-the-fly adjustment.
Disc brake hubs with 135 OLD use 44mm chainline. Road bikes with 130 OLD have 41,5mm chainline.
Shimano specifies 41.5mm chainline for hubs used with road groupsets. Using a 135OLD hub with 44mm chainline means the hub chainline is out of spec. This can result in chain rub, poor shifting or the chain getting caught on the shift pins on the back of the front chainrings.
This is what Specialized encountered with SCS bikes.
#13
member
I'm sorry but it's not that simple.
Disc brake hubs with 135 OLD use 44mm chainline. Road bikes with 130 OLD have 41,5mm chainline.
Shimano specifies 41.5mm chainline for hubs used with road groupsets. Using a 135OLD hub with 44mm chainline means the hub chainline is out of spec. This can result in chain rub, poor shifting or the chain getting caught on the shift pins on the back of the front chainrings.
This is what Specialized encountered with SCS bikes.
Disc brake hubs with 135 OLD use 44mm chainline. Road bikes with 130 OLD have 41,5mm chainline.
Shimano specifies 41.5mm chainline for hubs used with road groupsets. Using a 135OLD hub with 44mm chainline means the hub chainline is out of spec. This can result in chain rub, poor shifting or the chain getting caught on the shift pins on the back of the front chainrings.
This is what Specialized encountered with SCS bikes.
#14
NYC
Join Date: Sep 2006
Posts: 3,714
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1169 Post(s)
Liked 107 Times
in
62 Posts
Even rim brake to rim brake, different wheels are different widths, and you may have to adjust the brakes. If I know I'm swapping wheels back and forth, I'll set both bikes up for the narrower wheels, then use the quick release to open the up a bit on whichever bike happens to have the wider wheels at the time.
But this does get tiresome after a while.
But this does get tiresome after a while.
#15
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
If it is 130OLD road to 130 OLD road then it's a crap shoot. A little barrel adjuster magic may be in order.