New wheel, old steel bike. Powerful stroke sends wheel into left chainstay
#26
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
Note the dentated steel faces. Walmart (of all places) had a similar ones for $9.75pr
I guess if you spend for good stuff you get junk, go cheap for quality.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#27
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Brighton, Michigan
Posts: 662
Bikes: Optima Baron LR, '14 Nishiki Maricopa,'87 Trek 330 Elance, '89 Miyata 1400, '85 Peugeot PGN10, '04 Fuji Ace, '06 Giant Rincon, '95 Giant Allegre, '83 Trek 620, '86 Schwinn High Sierra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 163 Times
in
107 Posts
OK, finally back to answer some questions. Sorry for the late response. Work, life, wife, etc.
Someone asked about it still being 126mm. I cold spaced the dropouts using RJ The Bike Guy's method. It comes in right at 130mm now.
I've uploaded two pictures. One of the dropout, one of the skewer end, mainly the side that does move. I can definitely see now, the skewer end has no real gripping mechanism. Smooth as can be. Of course it would allow the wheel to slide to the left.
amilo posted a picture of what I should be looking for. Skewers with teeth. Anyone got a good link to buy one?
Dropout
Small skewer end
Someone asked about it still being 126mm. I cold spaced the dropouts using RJ The Bike Guy's method. It comes in right at 130mm now.
I've uploaded two pictures. One of the dropout, one of the skewer end, mainly the side that does move. I can definitely see now, the skewer end has no real gripping mechanism. Smooth as can be. Of course it would allow the wheel to slide to the left.
amilo posted a picture of what I should be looking for. Skewers with teeth. Anyone got a good link to buy one?
Dropout
Small skewer end
#28
Really Old Senior Member
How about the lever end?
#29
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
OK You're holding half your problem in your hand. Note the smooth face, or the shallow dull teeth ( not sure which from the photo). Note also the lack of serious bite marks on the dropout. If you search imaged of vintage bikes, you'll see dropout faces badly chewed up.
As I said, that's only half. The other half is your hubs axle, which seems to be aluminum. The axle itself doesn't matter, but note the smooth aluminum faces, which are trying to gum your frame because they lack the teeth.
So, new vintage skewer. I also recommend treating the axle. I keep a bottle of nail polish into which added some sand. I clean the axle with acetone, then apply the sand paint and let dry.
The reason for treating is that there's play between the axle and skewer, which will allow the axle to creak under load.
Getting bite from both axle and skewer may be "belt and suspenders", but may be absolutely necessary if you climb steep hills.
As I said, that's only half. The other half is your hubs axle, which seems to be aluminum. The axle itself doesn't matter, but note the smooth aluminum faces, which are trying to gum your frame because they lack the teeth.
So, new vintage skewer. I also recommend treating the axle. I keep a bottle of nail polish into which added some sand. I clean the axle with acetone, then apply the sand paint and let dry.
The reason for treating is that there's play between the axle and skewer, which will allow the axle to creak under load.
Getting bite from both axle and skewer may be "belt and suspenders", but may be absolutely necessary if you climb steep hills.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Likes For FBinNY:
#30
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Brighton, Michigan
Posts: 662
Bikes: Optima Baron LR, '14 Nishiki Maricopa,'87 Trek 330 Elance, '89 Miyata 1400, '85 Peugeot PGN10, '04 Fuji Ace, '06 Giant Rincon, '95 Giant Allegre, '83 Trek 620, '86 Schwinn High Sierra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 163 Times
in
107 Posts
Link here, if allowed to post
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I am hoping this does the trick.
#31
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
Those should solve it, (assuming the length is right).
If you want to keep the look, try the sandy nail polish hack. depending on your circumstances it should be about free. I made mine with "the wrong shade" and some grit media.
If you want to keep the look, try the sandy nail polish hack. depending on your circumstances it should be about free. I made mine with "the wrong shade" and some grit media.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#32
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Brighton, Michigan
Posts: 662
Bikes: Optima Baron LR, '14 Nishiki Maricopa,'87 Trek 330 Elance, '89 Miyata 1400, '85 Peugeot PGN10, '04 Fuji Ace, '06 Giant Rincon, '95 Giant Allegre, '83 Trek 620, '86 Schwinn High Sierra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 163 Times
in
107 Posts
Just got the skewer yesterday and installed it. It looks perfect with my Pacenti Brevet wheels. As soon as the ice clears and provided my dirt road doesn't melt into a mud quagmire for week, I'll be testing this on some of the local small hills. Hopefully the wheel stays.
#33
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
I can see the new trend now ------ Quagmire bikes.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#34
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,837
Bikes: 2012 Specialized Elite Disc, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 741 Times
in
430 Posts
RJ's video shows using dropout alignment tools. Did you do that as well as spreading the dropouts?
Do the outer locknuts/endcaps on the hub have any grip? From the photo it doesn't look like it.
Do the outer locknuts/endcaps on the hub have any grip? From the photo it doesn't look like it.
#35
Senior Member
I took a look at skewers on Amazon, and I wanted to keep that vintage look. So I found some 130-135mm trainer skewers, which did have the teeth missing from my current skewer.
Link here, if allowed to post
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I am hoping this does the trick.
Link here, if allowed to post
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I am hoping this does the trick.
Lube the cam (inside) with grease or anti-seize, without getting any lube on the clamping faces. Lubing the cam will allow you to get a tighter squeeze.
#36
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,795
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3514 Post(s)
Liked 2,927 Times
in
1,776 Posts
#37
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
#38
Senior Member
Join Date: Apr 2007
Posts: 6,764
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,204 Times
in
761 Posts
I got a skewer with my trainer (languishing as it is). It's just a cheaper, less refined version of the other internal cam skewers I have, as far as I can tell.
Like someone said, I think it's provided (a) because I'm not sure that the very common external cam skewer would work with the trainer and (b) if one has a nice looking internal cam skewer, it might get marred up by mounting on the trainer. That's what I always thought anyway. But, I have used that "trainer" skewer as a replacement for one on the bike. Works just the same, only problem is that it's ugly.
But really, has anyone, ever, actually noticed a skewer and thought: ooohhh my oh my, that's one fiiiiinnne skewer! I'm flustered! or Gaak, that's butt u-u-u-ugly, I can't bear to look at it!
Like someone said, I think it's provided (a) because I'm not sure that the very common external cam skewer would work with the trainer and (b) if one has a nice looking internal cam skewer, it might get marred up by mounting on the trainer. That's what I always thought anyway. But, I have used that "trainer" skewer as a replacement for one on the bike. Works just the same, only problem is that it's ugly.
But really, has anyone, ever, actually noticed a skewer and thought: ooohhh my oh my, that's one fiiiiinnne skewer! I'm flustered! or Gaak, that's butt u-u-u-ugly, I can't bear to look at it!
Last edited by Camilo; 02-24-24 at 03:22 PM.
Likes For Camilo:
#39
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,795
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3514 Post(s)
Liked 2,927 Times
in
1,776 Posts
Likes For smd4:
#41
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Brighton, Michigan
Posts: 662
Bikes: Optima Baron LR, '14 Nishiki Maricopa,'87 Trek 330 Elance, '89 Miyata 1400, '85 Peugeot PGN10, '04 Fuji Ace, '06 Giant Rincon, '95 Giant Allegre, '83 Trek 620, '86 Schwinn High Sierra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 163 Times
in
107 Posts
We're looking to have somewhat decent weather on Sunday this weekend. I'll take this Nishiki out for a spin and crank the pedals a few times to see if the new skewer holds tight.
#42
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Brighton, Michigan
Posts: 662
Bikes: Optima Baron LR, '14 Nishiki Maricopa,'87 Trek 330 Elance, '89 Miyata 1400, '85 Peugeot PGN10, '04 Fuji Ace, '06 Giant Rincon, '95 Giant Allegre, '83 Trek 620, '86 Schwinn High Sierra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 163 Times
in
107 Posts
I'd say my polished steel training skewer matches my Pacenti wheels perfectly. Definitely a "ooohhh my oh my, that's one fiiiiinnne skewer!" type of skewer. I even bought a front 100mm matching one.
Likes For friday1970:
#43
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,726
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5793 Post(s)
Liked 2,592 Times
in
1,436 Posts
So, I guess it's safe to assume it solved the wheel slippage problem?
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#44
Senior Member
Join Date: Apr 2007
Posts: 6,764
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,204 Times
in
761 Posts
Unfortunately, I don't have this tool. I can take it to my LBS to ensure the alignment is good. But I will do this only if my new skewer doesn't fix this issue.
We're looking to have somewhat decent weather on Sunday this weekend. I'll take this Nishiki out for a spin and crank the pedals a few times to see if the new skewer holds tight.
We're looking to have somewhat decent weather on Sunday this weekend. I'll take this Nishiki out for a spin and crank the pedals a few times to see if the new skewer holds tight.
Likes For Camilo:
#45
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,807
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
A home made alignment tool is very, very easy to make with readily available parts, and easy to use. I made something like this and it worked well when I spread the rear spacing of an older steel bike
How To Make DIY Dropout Alignment Gauge Tools - YouTube
How To Make DIY Dropout Alignment Gauge Tools - YouTube
If the dropouts aren’t square the best skewers in the world won’t straighten them.
John
Likes For 70sSanO:
#47
Really Old Senior Member
#48
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,398
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 514 Post(s)
Liked 451 Times
in
339 Posts
#49
Really Old Senior Member
Where did I say anything about rebuilding a hub or charging anything?
I've swapped in solid axles for QR simply for security reasons. What's your issue?
#50
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,398
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 514 Post(s)
Liked 451 Times
in
339 Posts
Riders a lot stronger than you or I have been successfully using closed-cam skewers in horizontal dropouts for over 90 years.
Last edited by oldbobcat; 02-27-24 at 10:16 PM.
Likes For oldbobcat: