Go Back  Bike Forums > Bike Forums > Touring
Reload this Page >

Tire Pressure

Search
Notices
Touring Have a dream to ride a bike across your state, across the country, or around the world? Self-contained or fully supported? Trade ideas, adventures, and more in our bicycle touring forum.

Tire Pressure

Thread Tools
 
Search this Thread
 
Old 05-14-12, 04:52 AM
  #1  
lucky1976
Member
Thread Starter
 
Join Date: Aug 2009
Location: North Tonawanda, NY
Posts: 30

Bikes: Cannondale Six13, Soma Double Cross

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Tire Pressure

I am heading out for my first short tour wednesday 550 miles. I mainly been using my bike for commuting. I am using 32mm Vittoria Randonneur Cross Pro at around 85-95 PSI for commuting. Two fully loaded panniers weight 12 lbs each plus handlebar bag at 3.5 lbs and I weight 175 lbs.

Should I up the PSI fully loaded or just go by feel?
lucky1976 is offline  
Old 05-14-12, 05:12 AM
  #2  
TheReal Houdini
Senior Member
 
Join Date: Apr 2011
Location: Vienna, VA
Posts: 221

Bikes: Cervelo P3 (retired), Habanero Road, Novara Safari, Batavus Personal Delivery Bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
You could drop to 75/70 back/front without risking a pinch-flat. You'll be more comfortable and roll faster on anything but velodrome-smooth surfaces.
TheReal Houdini is offline  
Old 05-14-12, 05:24 AM
  #3  
staehpj1
Senior Member
 
staehpj1's Avatar
 
Join Date: Aug 2006
Location: Tallahassee, FL
Posts: 11,868
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1251 Post(s)
Liked 754 Times in 560 Posts
What are the roads like where you are riding? The pressure that you are running sounds OK to me. That said, if you will be riding course chip seal roads maybe a bit less pressure might be a good choice to kill the buzz a bit. If the roads are super smooth you might even run a bit more pressure.
staehpj1 is offline  
Old 05-14-12, 07:29 AM
  #4  
bradtx
Senior Member
 
Join Date: Jun 2010
Location: Pearland, Texas
Posts: 7,579

Bikes: Cannondale, Trek, Raleigh, Santana

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 308 Post(s)
Liked 3 Times in 3 Posts
lucky1976, While I have 35 mm tires, I've run 65 PSI front and 70 PSI rear with basically the same weights you posted. You can always adjust pressure on the trip, but the 70/75 suggested above should be fine.

Brad
bradtx is offline  
Old 05-14-12, 09:24 AM
  #5  
mulveyr 
Senior Member
 
mulveyr's Avatar
 
Join Date: Feb 2010
Location: In the wilds of NY
Posts: 1,572

Bikes: Specialized Diverge, Box Dog Pelican, 1991 Cannondale tandem

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked 11 Times in 4 Posts
Originally Posted by lucky1976
I am heading out for my first short tour wednesday 550 miles. I mainly been using my bike for commuting. I am using 32mm Vittoria Randonneur Cross Pro at around 85-95 PSI for commuting. Two fully loaded panniers weight 12 lbs each plus handlebar bag at 3.5 lbs and I weight 175 lbs.

Should I up the PSI fully loaded or just go by feel?
That's way, way high. I run the exact same tires, at around 70PSI. In three years of loaded touring on everything from glass-smooth pavement to rutted singletrack, I've never needed more.

My touring load is me, at 170 lbs, a Raleigh Sojourn at 32 lbs, and usually around 30lbs of gear, since I carry for both myself and my kids.

Heck, I think the max recommended pressure on the tire itself is something like 70.

EDIT: FWIW, I've ended up following the pressure guidelines at https://janheine.files.wordpress.com/...presschart.jpg . I was dubious at first, but ended up believing it. None of the 6 bikes at our house have ever pinch-flatted at the recommended pressures, and rolling resistance has always been excellent, within the capabilities of the tire. ( The Rando Cross Pros, for example, are not a tire you ever buy for excellent rolling resistance in the first place. ;-) )
__________________
Knows the weight of my bike to the nearest 10 pounds.

Last edited by mulveyr; 05-14-12 at 09:39 AM.
mulveyr is offline  
Old 05-14-12, 11:05 AM
  #6  
MassiveD
Senior Member
 
Join Date: Jul 2011
Posts: 2,441
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
I usually run my tires in the 80s, on 38mm. Assuming the roads are fairly smooth. I have dropped them to 25 when running on soft rail trails. I didn't get pinch flats, but I would ride a small bump up on a bridge as though I was hopping a log. Also, I hadn't thought I had dropped the pressure as much as I had, it only became apparent when I pumped it back up, as my pump had the pressure gage on it. At that point I was running about 300 pounds on the bike, plus the bike weight.
MassiveD is offline  
Old 05-14-12, 12:26 PM
  #7  
biknbrian
Senior Member
 
biknbrian's Avatar
 
Join Date: Jun 2007
Location: Pittsburgh, PA
Posts: 352

Bikes: BiknBrian brand custom 26 inch commuter trekker, Cannondale F600 Single Speeded MTB, Nashbar Cro-Mo CX, some other bikes and parts that could be made into bikes.

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by mulveyr
That's way, way high. I run the exact same tires, at around 70PSI. In three years of loaded touring on everything from glass-smooth pavement to rutted singletrack, I've never needed more.

My touring load is me, at 170 lbs, a Raleigh Sojourn at 32 lbs, and usually around 30lbs of gear, since I carry for both myself and my kids.

Heck, I think the max recommended pressure on the tire itself is something like 70.

EDIT: FWIW, I've ended up following the pressure guidelines at https://janheine.files.wordpress.com/...presschart.jpg . I was dubious at first, but ended up believing it. None of the 6 bikes at our house have ever pinch-flatted at the recommended pressures, and rolling resistance has always been excellent, within the capabilities of the tire. ( The Rando Cross Pros, for example, are not a tire you ever buy for excellent rolling resistance in the first place. ;-) )
After a quick search I found the article that the picture came from. If it is to be belived I am way, like at least 20psi, over inflated for the 1.5 inch tires I run on my commuter. I may have to try lower pressure for a while and see how it feels.
biknbrian is offline  
Old 05-14-12, 12:48 PM
  #8  
lucky1976
Member
Thread Starter
 
Join Date: Aug 2009
Location: North Tonawanda, NY
Posts: 30

Bikes: Cannondale Six13, Soma Double Cross

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
thanks for all the head back... I am going to try 80 on the front and 85 on the back
lucky1976 is offline  
Old 05-14-12, 01:10 PM
  #9  
LeeG
Senior Member
 
Join Date: Sep 2008
Posts: 5,200
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Likes: 0
Liked 81 Times in 64 Posts
funny, the Vittoria site lists the Cross Pro as only available in 37mm or labeled 35mm with 60-70psi rating. The heavier Randonneur Trail and Randonnuer Touring tires are listed with 60-90psi rating with the steel bead Randonneur rated 60-80 compared to the folding Randonneur 60-70. I don't get their ratings but a 35-37mm tire with 80psi rolls just fine. I ride a Cross-Check with 35mm Marathon Supremes with any combination of front or rear panniers with my slender 210lbs and haven't felt the need to put more than 75psi in the rear tire. I usually ride 60 front/ 70 rear with 35mm Supremes.
Methinks if your goal is a faster rolling tire instead of picking higher psi with a deeply treaded tire get a slick tire and put it at the right psi. like the Supreme or Randonneur Pro.
If the tire really is 32mm then 85-90psi would be good for the rear with a heavy load.

Last edited by LeeG; 05-14-12 at 02:18 PM.
LeeG is offline  
Old 05-14-12, 01:51 PM
  #10  
MassiveD
Senior Member
 
Join Date: Jul 2011
Posts: 2,441
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
I just looked up the Marathon slicks and it read they were only good for 50-70. Another similar Marathon was good for 50-85. That sounds more like what I was riding the Slicks at. Normally tires that cap out at say 65-70 are not built to take the higher pressure, if they are road sized. They are probably comfort bike tires, and they just keep inflating like a balloon the more air you add.

Just checked some NOS Slicks I have, they are marked min 55, max 95. But this site says 45-70.

https://www.adventurecycling.org/stor...s-341-tire.cfm

So it probably pays to check the tire you are actually riding.
MassiveD is offline  
Old 05-14-12, 02:57 PM
  #11  
mulveyr 
Senior Member
 
mulveyr's Avatar
 
Join Date: Feb 2010
Location: In the wilds of NY
Posts: 1,572

Bikes: Specialized Diverge, Box Dog Pelican, 1991 Cannondale tandem

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Liked 11 Times in 4 Posts
Originally Posted by lucky1976
thanks for all the head back... I am going to try 80 on the front and 85 on the back
I just realized where I'd seen your name before - are you going to be starting on that Lake Ontario circuit you had asked about a couple months ago? The weather here in upstate NY has been absolutely gorgeous for riding the last couple of days.
__________________
Knows the weight of my bike to the nearest 10 pounds.
mulveyr is offline  
Old 05-15-12, 06:18 AM
  #12  
lucky1976
Member
Thread Starter
 
Join Date: Aug 2009
Location: North Tonawanda, NY
Posts: 30

Bikes: Cannondale Six13, Soma Double Cross

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by mulveyr
I just realized where I'd seen your name before - are you going to be starting on that Lake Ontario circuit you had asked about a couple months ago? The weather here in upstate NY has been absolutely gorgeous for riding the last couple of days.
I am actually leaving tomorrow morning....leaving from Amherst, NY heading to Wilson, NY and the east along Lake Ontario. I m planning on stopping in either Sodus Point, Fair Haven, NY or Oswego, NY the first night and then up to Canada thursday and on....
lucky1976 is offline  
Old 06-21-12, 04:22 PM
  #13  
silvercreek
Banned.
 
Join Date: Oct 2011
Location: Oklahoma
Posts: 680
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I just pickup a '48 Schwinn Balloon Tire bike. The tire pressure is 55 lbs MAX. Imagine that! It sure does ride smooth.
silvercreek is offline  
Old 06-21-12, 07:25 PM
  #14  
linus
Crawler
 
linus's Avatar
 
Join Date: Apr 2005
Location: OH~ CANADA
Posts: 1,410
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Liked 20 Times in 15 Posts
200lbs. my 32mm tires for my commuter gets rear 65 and front 55.
linus is offline  
Old 06-21-12, 07:31 PM
  #15  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,355 Times in 862 Posts
With a touring load aboard , you feel the rolling resistance go up,
when the tires are soft.

I bring a Gage..
fietsbob is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jseivert
General Cycling Discussion
6
05-14-19 03:32 AM
Bill Fold
Road Cycling
2
01-27-16 03:39 PM
milesofsmiles
Mountain Biking
52
10-16-15 01:17 PM
Ozonation
General Cycling Discussion
4
09-12-13 04:02 PM
ModeratedUser150120149
Fifty Plus (50+)
51
08-26-11 10:21 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.