Wheels stolen from Ultra 6 120mm configuration
#1
Newbie
Thread Starter
Join Date: Jun 2020
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wheels stolen from Ultra 6 120mm configuration
My wheels and seat were ripped off while my bike was locked up. I'd like to replace them instead of junking the bike. Bear with me, I don't know much about this.
The bike is a Specialized Crossroads Cruz. My best guess based on the fact that it's a 120mm rear and the specs call for a 6 speed, 14-28 "cassette" is that it takes a Suntour Ultra 6 freewheel, so I grabbed one of those.
I am having trouble finding a 120mm rear wheel that is economical for this bike. There aren't enough hub threads to put this freewheel on the 120mm flip-flop hubs that seem to be common.
Basically I'm looking for a hub/spoke/rim which will fit this and take a common/cheap tire size, like 32c, and ideally one I can match a front 100mm wheel to, without being too much of a loss in money and effort if thieves hit me again.
This is my first post here so I apologize if I've left anything important out.
The bike is a Specialized Crossroads Cruz. My best guess based on the fact that it's a 120mm rear and the specs call for a 6 speed, 14-28 "cassette" is that it takes a Suntour Ultra 6 freewheel, so I grabbed one of those.
I am having trouble finding a 120mm rear wheel that is economical for this bike. There aren't enough hub threads to put this freewheel on the 120mm flip-flop hubs that seem to be common.
Basically I'm looking for a hub/spoke/rim which will fit this and take a common/cheap tire size, like 32c, and ideally one I can match a front 100mm wheel to, without being too much of a loss in money and effort if thieves hit me again.
This is my first post here so I apologize if I've left anything important out.
#2
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
Get a 126 mm wheel, and "ooomph" the dropouts wider when inserting the wheel.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#3
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
Any 126mm rear hub that takes a freewheel will work. The caveat is removing/replacing the spacers by 3mm per side. Then cut the axle to 131mm. Always easier to remove than add.
John
Edit Added: Cold setting the frame to fit a 126mm will be better in the long run. You may want to have someone do it or talk to someone who has. The dropouts will be honked up and you’ll have to bend then parallel. Not a big deal, but will need to be done.
John
Edit Added: Cold setting the frame to fit a 126mm will be better in the long run. You may want to have someone do it or talk to someone who has. The dropouts will be honked up and you’ll have to bend then parallel. Not a big deal, but will need to be done.
Last edited by 70sSanO; 06-02-20 at 08:06 PM.
#4
Senior Member
Join Date: Dec 2007
Location: San Jose, California
Posts: 3,504
Bikes: 2001 Tommasini Sintesi w/ Campagnolo Daytona 10 Speed
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Likes: 0
Liked 35 Times
in
30 Posts
My wheels and seat were ripped off while my bike was locked up. I'd like to replace them instead of junking the bike. Bear with me, I don't know much about this.
The bike is a Specialized Crossroads Cruz. My best guess based on the fact that it's a 120mm rear and the specs call for a 6 speed, 14-28 "cassette" is that it takes a Suntour Ultra 6 freewheel, so I grabbed one of those.
I am having trouble finding a 120mm rear wheel that is economical for this bike. There aren't enough hub threads to put this freewheel on the 120mm flip-flop hubs that seem to be common.
Basically I'm looking for a hub/spoke/rim which will fit this and take a common/cheap tire size, like 32c, and ideally one I can match a front 100mm wheel to, without being too much of a loss in money and effort if thieves hit me again.
This is my first post here so I apologize if I've left anything important out.
The bike is a Specialized Crossroads Cruz. My best guess based on the fact that it's a 120mm rear and the specs call for a 6 speed, 14-28 "cassette" is that it takes a Suntour Ultra 6 freewheel, so I grabbed one of those.
I am having trouble finding a 120mm rear wheel that is economical for this bike. There aren't enough hub threads to put this freewheel on the 120mm flip-flop hubs that seem to be common.
Basically I'm looking for a hub/spoke/rim which will fit this and take a common/cheap tire size, like 32c, and ideally one I can match a front 100mm wheel to, without being too much of a loss in money and effort if thieves hit me again.
This is my first post here so I apologize if I've left anything important out.
I'd offer the exact wheel that you'd need, but UPS and USPS have jacked up their shipping costs because of the rioting stuff...
...for now, use this document as a reference to build your own:
https://www.mrrabbit.net/docs/freewhe...OLD_sizing.pdf
=8-)
__________________
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life
#5
Senior Member
If possible I'd consider seeing if any shops in your area would be willing to cold set the bike economically to either 126 or 130mm and align the dropouts and hanger. Friction shifting 8 speeds on a 130mm rear end is a nice upgrade for many older bikes.
Also, while 120mm multi-speed wheels have become somewhat uncommon new, they're still pretty darn common used.
Also, while 120mm multi-speed wheels have become somewhat uncommon new, they're still pretty darn common used.
#7
Senior Member
Join Date: Oct 2017
Location: NJ
Posts: 626
Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 204 Times
in
142 Posts
(I'd love to find an Ultra6 that has at least a 28 large not priced like gold. They pop up here but I am always too late.)
__________________
Last new bike 1991
Last new bike 1991
Last edited by dmark; 06-03-20 at 04:26 PM.