Did someone go nuts with a milling machine?
#1
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,939
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1084 Post(s)
Liked 1,820 Times
in
662 Posts
Did someone go nuts with a milling machine?
This popped up at the co-op.
I couldn’t tell if this were stock or someone bought a new machine and was having fun
I couldn’t tell if this were stock or someone bought a new machine and was having fun
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
Likes For Robvolz:
#2
Senior Member
nope, these stems came milled and drilled like this from the factory:
examples:
https://velobase.com/ViewComponent.a...=102&AbsPos=78
https://www.velosaloon.com/products/...from-the-1970s
examples:
https://velobase.com/ViewComponent.a...=102&AbsPos=78
https://www.velosaloon.com/products/...from-the-1970s
__________________
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Likes For Catnap:
#3
blahblahblah chrome moly
Join Date: Apr 2009
Location: Seattle
Posts: 1,994
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1181 Post(s)
Liked 2,576 Times
in
1,076 Posts
Ha, I would've guessed done by an amateur hobbyist, because of the rough machining.
FYI you can save more weight, and/or with less chance of dying, by drilling the extension from the front, stopping short of coming out the back. Making the extension more like a tubular stem. That metal down the middle does almost nothing strength-wise, so it's "free" lightening as long as it's done precisely on-center, not drifting toward one side.
You can tell that's been done because it leaves a hole in the front of the H-bar clamp, but otherwise it's 'stealth'. Which of course would defeat the purpose; this SR is milled that way for the look, not the actual lightness! But me, If I were going for a look, I'd strive for less-glaring machining marks, ugh. Still, a pretty cool part if only for historical interest.
FYI you can save more weight, and/or with less chance of dying, by drilling the extension from the front, stopping short of coming out the back. Making the extension more like a tubular stem. That metal down the middle does almost nothing strength-wise, so it's "free" lightening as long as it's done precisely on-center, not drifting toward one side.
You can tell that's been done because it leaves a hole in the front of the H-bar clamp, but otherwise it's 'stealth'. Which of course would defeat the purpose; this SR is milled that way for the look, not the actual lightness! But me, If I were going for a look, I'd strive for less-glaring machining marks, ugh. Still, a pretty cool part if only for historical interest.
Likes For bulgie:
#5
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,187
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 884 Post(s)
Liked 2,308 Times
in
1,118 Posts
The examples Catnap linked to were not done as poorly. Perhaps the stem the OP has was done by an amateur trying to emulate those. I wouldn’t think a production item would have been allowed to leave the shop looking like that.
Last edited by Chuck M; 02-01-24 at 03:30 PM.
Likes For chain_whipped:
#7
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,807
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
nope, these stems came milled and drilled like this from the factory:
examples:
https://www.velosaloon.com/products/...from-the-1970s
examples:
https://www.velosaloon.com/products/...from-the-1970s
Small crack on clamping area, might still be usable but will still be sold as defective! /
HaHaHa.. Nothing like floating bars at 25+mph to liven up your ride.
John
Likes For 70sSanO:
#8
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,100
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1401 Post(s)
Liked 1,886 Times
in
1,085 Posts
#9
Senior Member
Thread Starter
Join Date: Jul 2022
Location: Pac NW
Posts: 1,939
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1084 Post(s)
Liked 1,820 Times
in
662 Posts
After looking at Catnap's examples (velocity-base, Etc) and google images, I think someone was having fun trying to emulate the original.
I say this because the concave cut-away goes all the way back on this one, but not on the factory ones.
Robert
I say this because the concave cut-away goes all the way back on this one, but not on the factory ones.
Robert
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#10
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,648
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
"ADVENTURE!!!"
^ that was supposed to be all caps- autocorrect got me.
^ that was supposed to be all caps- autocorrect got me.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Likes For The Golden Boy:
#11
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,648
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
Does anyone remember this gem?
"This crankset is not for the older man who is trying to recreate something ORIGINAL that he always wanted and say "i finally got it after 4 decades!". this is for the person who is actually riding and getting a good deal on a very good crankset."DONT BE AFRAID TO STEP OUT OF THE BOX!" If you fall down and break your hip it just means your rode to the very end of your life! That is called passion!! and you have Obama care! THE WEIGHT IS VERY CLOSE TO SUPER RECORD 11. I KNOW MANY BABY BOOMERS MAY NOT HAVE NOT HAVE THE PRIVILEGE TO OWN SUPER RECORD 11. BUT THE WEIGHT IS VERY CLOSE. AT ONLY 10% OF THE COST! THIS IS A DEAL! YOUR WHITE HAIRED WIFE WON'T GET ON YOU FOR SPENDING TOO MUCH! EVERYONE IS HAPPY! ask her for permission to bid. it's only starting at $49 and no reserve!"
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#12
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,906
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,932 Times
in
2,557 Posts
I work in a Fuji shop when Superbe made its first appearance in the Fuji Pro, 1977. A year before it was available anywhere else. The stems, cranks, brakes etc. looked like the Nitto, Sugino and DiaCompe versions on the Pros the year before only a whole lot nicer. Like those companies got on board with SunTour to form the gruppo with a common focus.
I drooled over those parts I saw every day. But the year before equivalents on my Pro served me very well. And in later years I started seeing those non-SunTour companies issuing high end parts with their names on them and looking like they had benefited from Superbe genes.
#13
Senior Member
Serious question (and off-topic). Something I have wondered for 45 years. Was that stem (and the other non-derailleur Superbe parts) made by SunTour or other makers and labeled Superbe?
I work in a Fuji shop when Superbe made its first appearance in the Fuji Pro, 1977. A year before it was available anywhere else. The stems, cranks, brakes etc. looked like the Nitto, Sugino and DiaCompe versions on the Pros the year before only a whole lot nicer. Like those companies got on board with SunTour to form the gruppo with a common focus.
I drooled over those parts I saw every day. But the year before equivalents on my Pro served me very well. And in later years I started seeing those non-SunTour companies issuing high end parts with their names on them and looking like they had benefited from Superbe genes.
I work in a Fuji shop when Superbe made its first appearance in the Fuji Pro, 1977. A year before it was available anywhere else. The stems, cranks, brakes etc. looked like the Nitto, Sugino and DiaCompe versions on the Pros the year before only a whole lot nicer. Like those companies got on board with SunTour to form the gruppo with a common focus.
I drooled over those parts I saw every day. But the year before equivalents on my Pro served me very well. And in later years I started seeing those non-SunTour companies issuing high end parts with their names on them and looking like they had benefited from Superbe genes.
All of these manufacturers also had their own component businesses, selling their respective brands. The lines get blurry sometimes with Suntour’s component designs, so for example you have items like the Sugino GLP crankset which is identical to the Suntour Cyclone. There’s other examples, too, but like you said, (most of the time) those other Japanese manufacturers got on board with Suntour’s vision of a cohesive, elevated group.
Suntour made hubs and derailleurs for Sugino. The first year Sugino launched the Sugino 75 product line, there was a full Sugino 75 road group. Suntour made the derailleurs, Dia Compe made the brakes, etc.
it was a smart tactic for the smaller manufacturers to join together to compete with Shimano.
__________________
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
#14
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
SR (Sakae Ringyo) was part of the "parent group" connected with Shimano so would not have made products for the competition (Maeda), AFAIK
Here's a nice graphic that juvela provided (in another thread) that touts the Brands that were parts of the Shimano "Trading Group" in 1973
Sun Tour (Maeda) had a similar Trading group with their own family of brands Dia Compe being one...
Here's a nice graphic that juvela provided (in another thread) that touts the Brands that were parts of the Shimano "Trading Group" in 1973
Sun Tour (Maeda) had a similar Trading group with their own family of brands Dia Compe being one...
Last edited by unworthy1; 02-01-24 at 10:50 PM.
#15
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,046
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,387 Times
in
3,672 Posts
Time for this again?
Likes For merziac:
#17
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
Likes For JohnDThompson:
Likes For Steel Charlie:
#19
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
Likes For SJX426:
#20
Senior Member
unworthy1 As other folks have shown, SR did make stems for Suntour. Some Superbe stems were made by Kusuki (the early models) and then the later models were made by SR.
__________________
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
#21
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,658
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1027 Post(s)
Liked 2,531 Times
in
1,059 Posts
I'm 6'3" tall. I weigh 255 lbs. As a general proposition, I don't do "weight-weenie" stuff. More specifically, I don't do drilled out stuff. I sure as hell don't do milled-and-drilled stems. I also still have all my own original-issue teeth.
I can't prove it, but no one will convince me that these facts are not related.
I can't prove it, but no one will convince me that these facts are not related.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#22
Senior Member
I'm 6'3" tall. I weigh 255 lbs. As a general proposition, I don't do "weight-weenie" stuff. More specifically, I don't do drilled out stuff. I sure as hell don't do milled-and-drilled stems. I also still have all my own original-issue teeth.
I can't prove it, but no one will convince me that these facts are not related.
I can't prove it, but no one will convince me that these facts are not related.
If someone wants to ride drillium vintage parts for fashion reasons, more power to them. But in the year 2024 no one is making the argument that drilled out quill stems, seatposts, etc. have any practical improvement over regular parts.
Last edited by Catnap; 02-02-24 at 06:56 PM.
#23
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
unworthy1 As other folks have shown, SR did make stems for Suntour. Some Superbe stems were made by Kusuki (the early models) and then the later models were made by SR.
#24
Senior Member
SR ended up buying out Suntour (or was it a merger?) so it makes sense that the two companies would have had prior dealings
__________________
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Check out www.djcatnap.com for articles on vintage Japanese & French bicycle restorations, components and history.
Likes For Catnap: