Bike pump explosion..
#1
Full Member
Thread Starter
Bike pump explosion..
So I was in a big hurry to get to work yesterday and I pumped up my front tire a little too fast and maybe 10 psi over on accident. I let some air out and thought it was ok.. and then I went to pump my rear tire and the nozzle strangely kept blowing off at around 90 - 100 psi when it normally allows me to go to 120. I was getting frustrated and kept putting my nozzle back on to get up to the correct psi until all of a sudden the bottom of the hose blew on my park tool pump. My bike had a nearly flat tire and I had to use my hand pump the rest of the way almost making me late to work. So I guess thats not the way your supposed to pump and I wont be doing that again since all the built up pressure from going way too fast let that happen. Anyways does anyone know how/where I can get a replacement hose for my pump? There's really no warranty since I got it off amazon over a year ago..
#3
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
#4
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,904
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,928 Times
in
2,553 Posts
A good reason to squeeze your tires. Do it regularly and you will know what's actually happening at the tire regardless of what your gauge says.
(Also a good reason for using real frame pumps, not mini pumps. Actually, in all truth, I do not know this, I have never owned or used a mini pump. I find 100 pumps to be plenty and hear the small pumps require more so I haven't changed. 100 gets me to full riding pressure.)
Ben
(Also a good reason for using real frame pumps, not mini pumps. Actually, in all truth, I do not know this, I have never owned or used a mini pump. I find 100 pumps to be plenty and hear the small pumps require more so I haven't changed. 100 gets me to full riding pressure.)
Ben
#5
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,707
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5781 Post(s)
Liked 2,576 Times
in
1,427 Posts
Odds are the hose blew because it was ready to anyway, and had nothing to do with pumping too fast. However there is also a possibility that it was heat related, since compressing air generates heat (where the phrase "hot air" comes from).
If the hose blew apart at the base of the pump. then heat is likely a factor, if not as an immediate cause, at least as a long term one.
Either way, Park has historically made hoses available, so you should be able to source one easily enough, or can go to Park's site to find a source.
If the hose blew apart at the base of the pump. then heat is likely a factor, if not as an immediate cause, at least as a long term one.
Either way, Park has historically made hoses available, so you should be able to source one easily enough, or can go to Park's site to find a source.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#6
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,903
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 1,930 Times
in
1,211 Posts
I'd go with the "no burp" guess, or you had the pump on cocked such that it jammed the valve shut. You can get some really high pressures with a bike pump!
#9
Senior Member
Join Date: Feb 2008
Location: Groves, Texas
Posts: 136
Bikes: Schwinn Sport Tourer, Dawes Lightning Tourer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Sometimes the valve seal gets stuck and even air pressure wont unstick it. That's why you lightly tap the top of the valve to make sure the valve isn't stuck.
That's "burping".
That's "burping".
#10
Senior Member
Join Date: Jan 2013
Posts: 2,679
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 581 Times
in
409 Posts
Standard procedure for a Presta tube is to first tap the stem prior to inflating. I don't believe Park Tools sells new hoses with a head so a call to them might help or you may need to buy another brand hose/head for replacement if you can find one that will work with the pump fitting. Photos always help.
#11
Senior Member
Join Date: May 2003
Location: Mountain Brook. AL
Posts: 4,002
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Likes: 0
Liked 136 Times
in
104 Posts
Unless the hose has split is probably can be put back in place. The current model pump (PF8) appears to have a hose fitting that I would bet is a screw on fitting
at the base of the pump. If you unscrew this, it should fit over the end of the hose and the unit screwed back in place. My Park is an older model but all the
hose fittings at the bottom of the pump are screwed on ( unlike the swaged on hoses of some of my older defunct pumps).
Park video: Home Mechanic Floor Pump | Park Tool on how to use the pump demonstrates the burping, though I
tap the end of the valve 2-3 times, compared to the video once. I have had sticky presta valves that despite burping enough to drop tire pressure 20# or so will still
not release until the tire pump gets up to 160# or so IN THE PUMP HOSE (NOT in the tire) before the presta valve releases and then air starts going into the tire.
Normally you will hear the presta valve click with each pump as air goes into the tire.
at the base of the pump. If you unscrew this, it should fit over the end of the hose and the unit screwed back in place. My Park is an older model but all the
hose fittings at the bottom of the pump are screwed on ( unlike the swaged on hoses of some of my older defunct pumps).
Park video: Home Mechanic Floor Pump | Park Tool on how to use the pump demonstrates the burping, though I
tap the end of the valve 2-3 times, compared to the video once. I have had sticky presta valves that despite burping enough to drop tire pressure 20# or so will still
not release until the tire pump gets up to 160# or so IN THE PUMP HOSE (NOT in the tire) before the presta valve releases and then air starts going into the tire.
Normally you will hear the presta valve click with each pump as air goes into the tire.
#12
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,362
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6219 Post(s)
Liked 4,218 Times
in
2,365 Posts
So I was in a big hurry to get to work yesterday and I pumped up my front tire a little too fast and maybe 10 psi over on accident. I let some air out and thought it was ok.. and then I went to pump my rear tire and the nozzle strangely kept blowing off at around 90 - 100 psi when it normally allows me to go to 120. I was getting frustrated and kept putting my nozzle back on to get up to the correct psi until all of a sudden the bottom of the hose blew on my park tool pump. My bike had a nearly flat tire and I had to use my hand pump the rest of the way almost making me late to work. So I guess thats not the way your supposed to pump and I wont be doing that again since all the built up pressure from going way too fast let that happen. Anyways does anyone know how/where I can get a replacement hose for my pump? There's really no warranty since I got it off amazon over a year ago..
You might contact Park Tools and tell them about the problem. Include pictures so that they can see what happened. They've been very responsive to issues I've had with tools in the past and may even send you a new hose.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!