Show Us Your Bikes Starting With E
#1
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,469
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked 1,900 Times
in
931 Posts
Show Us Your Bikes Starting With E
Here's your chance to show us your bikes alphabetically!
It goes like this: every fortnight I'll start a new thread with a new letter in alphabetical order. Post your classic and vintage bikes that correspond to that letter, eg; C = Cinelli, Carlton, Ciocc. M = Mercian, Masi, Motobecane. And so on and so forth. The letter of the fortnight should correspond with the marque, not the model. For example; you could post your Tommasini Prestige in the T thread, but not in the P thread. If you're not sure, take a look at the word on your downtube. There's a grey area with people's names - Bruce Gordon, Claud Butler, etc., but I'll leave it up to the owners which thread is preferred. Make sense?
So let's see your Eimeis, Europas and...I can't think of any more E's
It goes like this: every fortnight I'll start a new thread with a new letter in alphabetical order. Post your classic and vintage bikes that correspond to that letter, eg; C = Cinelli, Carlton, Ciocc. M = Mercian, Masi, Motobecane. And so on and so forth. The letter of the fortnight should correspond with the marque, not the model. For example; you could post your Tommasini Prestige in the T thread, but not in the P thread. If you're not sure, take a look at the word on your downtube. There's a grey area with people's names - Bruce Gordon, Claud Butler, etc., but I'll leave it up to the owners which thread is preferred. Make sense?
So let's see your Eimeis, Europas and...I can't think of any more E's
#2
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts
Eisentraut and Erickson come to mind, but as of yet have not come to me.
#4
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts
#7
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,942
Bikes: Mostly English - predominantly Raleighs
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1495 Post(s)
Liked 1,099 Times
in
644 Posts
I have an Elswick Hopper that my wife picked, and which hasn't made it to the front of the project queue. Next time she goes out, I'll pull it down and snap couple pictures of its circa 1980 funkiness.
__________________
In search of what to search for.
In search of what to search for.
#8
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts
Ellis Briggs
#9
Senior Member
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
Alright then, I’ll play!
Just so happens that both of my bikes fall into the “E” category. Though I was kinda hoping that this specific thread would’ve come up a bit later as neither frame is an actual built bike at this present time.
Eisentraut needs no formal introduction. Mine is a ‘76 Limited Touring purchased as a frame and fork. Pictured is 55cm x 54cm frame in mock assembly as it sits right now.
Early Cycles is not so well known. The name is taken from the builders middle name. Gary Earl Hale was a custom frame builder and innovator who held shop in Eugene, Oregon from the mid 70’s to the mid 80’s. While he focused on recumbents and hand powered machines, he also produced approximately 300 custom ordered diamond frames during the course of a decade.
Mine was made to order in 1981. It’s built with a Columbus SL tubeset, and features Campy drop outs, fork tips, and cable guides. I’m the second owner. This frame fits like a glove and rides like a dream.
Here it shown in its as purchased configuration. The original owner had build it with Record group upon delivery of the frameset from Gary Hale. However, 10 years ago he rebuilt it as a single speed, was dissatisfied with the results, and so hung it in his garage for the remainder of its time in his possession.
And here it is in its current state, awaiting rebuild..,
Just so happens that both of my bikes fall into the “E” category. Though I was kinda hoping that this specific thread would’ve come up a bit later as neither frame is an actual built bike at this present time.
Eisentraut needs no formal introduction. Mine is a ‘76 Limited Touring purchased as a frame and fork. Pictured is 55cm x 54cm frame in mock assembly as it sits right now.
Early Cycles is not so well known. The name is taken from the builders middle name. Gary Earl Hale was a custom frame builder and innovator who held shop in Eugene, Oregon from the mid 70’s to the mid 80’s. While he focused on recumbents and hand powered machines, he also produced approximately 300 custom ordered diamond frames during the course of a decade.
Mine was made to order in 1981. It’s built with a Columbus SL tubeset, and features Campy drop outs, fork tips, and cable guides. I’m the second owner. This frame fits like a glove and rides like a dream.
Here it shown in its as purchased configuration. The original owner had build it with Record group upon delivery of the frameset from Gary Hale. However, 10 years ago he rebuilt it as a single speed, was dissatisfied with the results, and so hung it in his garage for the remainder of its time in his possession.
And here it is in its current state, awaiting rebuild..,
Last edited by deux jambes; 04-08-19 at 02:30 PM.
#10
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,849
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,056 Times
in
1,256 Posts
This is a cheat, Eaton's Commander (made by Hercules)
#11
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts
#12
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,849
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,056 Times
in
1,256 Posts
And the ride is sublime. A fave for both my wife and myself.
#13
Senior Member
#15
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,942
Bikes: Mostly English - predominantly Raleighs
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1495 Post(s)
Liked 1,099 Times
in
644 Posts
Sorry to sully the thread, but here's the aforementioned Elswick. Seat post is stuck, and there's a host of other issues, but nothing that can't be overcome. This is destined to be one of our "guest bikes", once it's back in fine working order.
__________________
In search of what to search for.
In search of what to search for.
#19
Senior Member
Join Date: Sep 2010
Location: Rupert's Land
Posts: 1,246
Bikes: 1981 Raleigh GP, 1985 Norco Bush Pilot, . . .
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 242 Post(s)
Liked 188 Times
in
137 Posts
Eliminator. No decals. Needs some work. It is about number 12 in the queue and low priority. Components date to 1966.
EDIT: In different years Norco contracted the frames form different suppliers. I have seen Eliminator frames from Korea, Taiwan, and Japan.
Here is another Eliminator from the 1970s.
EDIT: In different years Norco contracted the frames form different suppliers. I have seen Eliminator frames from Korea, Taiwan, and Japan.
Here is another Eliminator from the 1970s.
Last edited by Hummer; 04-11-19 at 12:29 AM. Reason: More Info
#20
Senior Member
Join Date: Jun 2016
Location: Saigon - South Vietnam
Posts: 139
Bikes: Saronni Colnago 1982; Battaglin 1982, Centurion Lemans RS 1978, 3Rensho Katana 1978, C. Borghi Olympia 1980, 3Rensho Athlete 1980's, Holdsworth 1980's and more...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 9 Times
in
5 Posts
Why no Eddy Merckx here???
#22
Senior Member
Join Date: Nov 2015
Location: Lacey, WA
Posts: 1,707
Bikes: Stevenson Custom, Stevenson Custom Tandem, Nishiki Professional
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Likes: 0
Liked 196 Times
in
128 Posts
It stared as a frame and a fork, for $25.00. Early on I decided to rebuild with Suntour Superbe while using the few original parts found later for this bike (inscribed big chain ring and stem) and there are different generations of Superbe and Superbe Pro on this bike. The shifters, like the hidden spring brakes was a choice based on their being the best in many opinions that were ever made. They are the micro adjust ratchet style and they are both effortless to move and hold their gear without slipping when you have to tug them up into the biggest chainring, unlike another brand I have in my collection. It is a beautiful ride, even with 120psi 23mm tires. It was rebuilt for me to enjoy riding it, but it's a lovely thing each morning too and brings a smile. But try as I might, even Japanese Counsul, I still do not know who H. Hagiwara, assumed builder, was.
If you would like to see more pictures and the before/after just search with "H. Hagiwara-Erba" and you will find the earlier posts with pictures. You'll also see how the internally run shift cables get to their respective derailleurs and other details of the bike.
Thanks
If you would like to see more pictures and the before/after just search with "H. Hagiwara-Erba" and you will find the earlier posts with pictures. You'll also see how the internally run shift cables get to their respective derailleurs and other details of the bike.
Thanks
Last edited by since6; 04-11-19 at 07:59 AM.
#24
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,671
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1033 Post(s)
Liked 2,550 Times
in
1,066 Posts
1978 Eisentraut "A," resprayed and decked on in Campy 10sp triple finery. In this photo, it has vintage Campagnolo Record single pivot brakes, since replaced with dual-pivot Tektros of suitable length.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
#25
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,091
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4520 Post(s)
Liked 6,407 Times
in
3,686 Posts