Crazy Idea for Schwinn Meridian/Town and Country Trike
#1
Velocommuter Commando
Thread Starter
Crazy Idea for Schwinn Meridian/Town and Country Trike
Has anyone Tried slapping a Sunlite Products springer fork on a Meridian/Town and Country Trike?
Would doing so compromise the handling or carrying capacity?
Would doing so compromise the handling or carrying capacity?
Last edited by Sirrus Rider; 03-17-12 at 07:22 PM.
#2
DelawareDave
Join Date: Apr 2009
Location: New Castle Delaware
Posts: 90
Bikes: 3 mountian bikes 1 recumbent bike 1 racing bike 5 stingrays 1 hybrid 2 beach crusers 1 tandem and at least 6 more that are beyond description
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Here's one with a springer fork and dual evo motors mounted on the front. It rode well.
#3
Velocommuter Commando
Thread Starter
#4
DelawareDave
Join Date: Apr 2009
Location: New Castle Delaware
Posts: 90
Bikes: 3 mountian bikes 1 recumbent bike 1 racing bike 5 stingrays 1 hybrid 2 beach crusers 1 tandem and at least 6 more that are beyond description
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I think you might need wheelie bars so the weight does not shift back too far. I had extensions on a springer fork that did make it compress too far. I took the bolt out of the center of the springer fork and put a piece of rubber hose inside and put the bolt back in. That did keep it from compressing too far. A drum brake on the front would be good too, with all te extra weight you'll have you will need extra braking power. One consideration in carrying a keg would be if the route home is bumpy enough that you couldn't tap the keg when you got home. That would be a disapointment.
#5
Velocommuter Commando
Thread Starter
I think you might need wheelie bars so the weight does not shift back too far. I had extensions on a springer fork that did make it compress too far. I took the bolt out of the center of the springer fork and put a piece of rubber hose inside and put the bolt back in. That did keep it from compressing too far. A drum brake on the front would be good too, with all te extra weight you'll have you will need extra braking power. One consideration in carrying a keg would be if the route home is bumpy enough that you couldn't tap the keg when you got home. That would be a disapointment.
#6
DelawareDave
Join Date: Apr 2009
Location: New Castle Delaware
Posts: 90
Bikes: 3 mountian bikes 1 recumbent bike 1 racing bike 5 stingrays 1 hybrid 2 beach crusers 1 tandem and at least 6 more that are beyond description
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
tap the keg before the ride home, make lots of friends along the way.
#7
Senior Member
Join Date: May 2003
Location: Idaho
Posts: 496
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If the ballast is placed slightly forward of the rear axle, you'll be fine. Considering the weight they add, I don't see much use for a springer on a trike.
#9
Senior Member
Join Date: Jan 2018
Location: Veneta OR
Posts: 109
Bikes: yes, Bikes
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Just my own opinion,
I don't think that's so crazy.
And that is a great looking back rest. Great for lumbar support.
Does that back rest jolt your back when going over bumps? A front suspension might help the jolt if it does.
As far as weight, if the keg is 50 lbs, what does the rider weigh?
I'm over 200, and if the bike can support me, another 50 in the back of a trike should work. Balance might an issue
if the keg is too far back behind the rear axle. Foam padding for less suds.
have you seen the pic of the trike I named "other" ? It's on this "Utility" sub forum.
That weighs over 400 lbs, cart and tools, and takes the extra weight. Not fast though, but that's mostly because
the "cart is before the horse" and steers funny at speed. Then when I mount up, that's over 600 lbs total.
One thing if favor of trying out a springer fork is that if it doesn't work out, put the stock parts back on.
A reason I do not think the idea is crazy is that when riding a 2 wheeled bike, a rider can "unweight" the seat
by standing on the pedals, and letting the bike rock over a bump instead of hitting it so hard.
When riding a tandem or trike the 'bump" is transferred to the handlebars/rider full force.
Am also considering adding a MTB suspension fork to the long wheelbase utility bicycle I'm planing.
Still just on paper, but using drawings and doodles is how I end up with something that might work.
I don't think that's so crazy.
And that is a great looking back rest. Great for lumbar support.
Does that back rest jolt your back when going over bumps? A front suspension might help the jolt if it does.
As far as weight, if the keg is 50 lbs, what does the rider weigh?
I'm over 200, and if the bike can support me, another 50 in the back of a trike should work. Balance might an issue
if the keg is too far back behind the rear axle. Foam padding for less suds.
have you seen the pic of the trike I named "other" ? It's on this "Utility" sub forum.
That weighs over 400 lbs, cart and tools, and takes the extra weight. Not fast though, but that's mostly because
the "cart is before the horse" and steers funny at speed. Then when I mount up, that's over 600 lbs total.
One thing if favor of trying out a springer fork is that if it doesn't work out, put the stock parts back on.
A reason I do not think the idea is crazy is that when riding a 2 wheeled bike, a rider can "unweight" the seat
by standing on the pedals, and letting the bike rock over a bump instead of hitting it so hard.
When riding a tandem or trike the 'bump" is transferred to the handlebars/rider full force.
Am also considering adding a MTB suspension fork to the long wheelbase utility bicycle I'm planing.
Still just on paper, but using drawings and doodles is how I end up with something that might work.
#10
Velocommuter Commando
Thread Starter
#11
Senior Member
Join Date: Dec 2007
Posts: 832
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 90 Post(s)
Likes: 0
Liked 18 Times
in
16 Posts
the only thing I don't like when I build my own bikes with springer's is extra sag (I'm usually working with steel and admittedly making them too heavy).
I've sometimes found a smaller spring at the hardware store and wound it into the stock spring, but I'm always wondering if there are optional stiffer, maybe slightly longer springs to be found.
I've sometimes found a smaller spring at the hardware store and wound it into the stock spring, but I'm always wondering if there are optional stiffer, maybe slightly longer springs to be found.
#12
Senior Member
Join Date: Dec 2017
Location: A2, MI
Posts: 132
Bikes: hopefully a Sun Traditional Trike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 50 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ideas.. ideas... that seat is an idea... I am getting a trike- plan is to order in a week or 2.. (depending on weather forecast)
Thread
Thread Starter
Forum
Replies
Last Post
Filmore
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
3
08-07-11 10:29 AM