Securing fixed cog w/o lockring
#1
Junior Member
Thread Starter
Join Date: Oct 2012
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Securing fixed cog w/o lockring
Suppose I have hub with freewheel threads only. If I use red loctite and wrench the cog on really tight, will it be strong enough to resist backpedal braking? If not, what are other options? I probably can't weld steel to aluminum very easily. But maybe I can drill a hole through the cog lip into the hub threads and run a screw in?
#3
Senior Member
You have three options:
1. Rotafix
2. Bottom bracket lock ring
3. Zip tie the cog to the spokes
All of these might result in someone's death; probably yours.
1. Rotafix
2. Bottom bracket lock ring
3. Zip tie the cog to the spokes
All of these might result in someone's death; probably yours.
#4
Junior Member
Thread Starter
Join Date: Oct 2012
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Suicide Hub A rather alarmist and silly name for a freewheel hub used as a fixed-gear hub. Any standard-thread freewheel type hub will also accept a fixed-gear ("track ") sprocket . This is a common technique for converting an older bike to fixed gear on the cheap. Despite the silly name, this is no more dangerous than using a freewheel, as long as you keep front and rear hand brakes installed.
But it doesn't really provide any information regarding what I requested in my initial post. I'm not buying a track hub. I'll just simply get rid of the bicycle and forget the whole project if nothing else works.
The bottom bracket lockring may be helpful, though.
#7
pro in someone's theory
Join Date: Jul 2011
Location: Las Cruces, NM
Posts: 3,236
Bikes: FTP
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
You should do a search using the forum search tool for threads with "suicide hub" in the title to get lots of opinions about whether loctite is sufficient etc. But the quote you have from Sheldon ought to be enough. He thinks it is safe ... if you have two brakes. If you have only one brake it is considerably less safe and if you are riding brakeless then it no, the name is not dramatic.
#9
pro in someone's theory
Join Date: Jul 2011
Location: Las Cruces, NM
Posts: 3,236
Bikes: FTP
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
So, answer the OP's question. What are you using? Which color loctite? And really how many miles have you put on that particular bike?
#10
Your cog is slipping.
I'm not using any Loctite but I am using a BB lockring - even though some people on this forum swear it's useless.
Not really sure how many miles are on it but it's the bike I ride in the rain, on quick shop errands, when I'm carrying stuff (as pictured) and during the winter. While I do ride it quite a bit, the longest ride I've ever done on it has been about two miles to the beach pictured on roads with very little car traffic.
Once when I was skidding like a maniac in the parking lot across the street from the shop trying to get the cog to loosen up/fail, I snapped the non drive side crank arm instead (it was just a cheapo crank but still). I'd say the cog isn't going anywhere...
I'll probably throw a brake on one of these days.
By the way: I'm not saying everyone should go out and ride a brakeless fixed gear bike equipped with a suicide hub at maximum speed and busting mad skidz in busy downtown traffic. I'm just saying that in my experience, I have had no trouble and most "reports" of how completely unsafe it is are typically made by people who have never done it.
Not really sure how many miles are on it but it's the bike I ride in the rain, on quick shop errands, when I'm carrying stuff (as pictured) and during the winter. While I do ride it quite a bit, the longest ride I've ever done on it has been about two miles to the beach pictured on roads with very little car traffic.
Once when I was skidding like a maniac in the parking lot across the street from the shop trying to get the cog to loosen up/fail, I snapped the non drive side crank arm instead (it was just a cheapo crank but still). I'd say the cog isn't going anywhere...
I'll probably throw a brake on one of these days.
By the way: I'm not saying everyone should go out and ride a brakeless fixed gear bike equipped with a suicide hub at maximum speed and busting mad skidz in busy downtown traffic. I'm just saying that in my experience, I have had no trouble and most "reports" of how completely unsafe it is are typically made by people who have never done it.
Last edited by Scrodzilla; 11-23-12 at 03:52 PM.
#11
Senior Member
Join Date: Apr 2005
Location: Brownsville, TX
Posts: 2,174
Bikes: Surly CC
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A while back I got the lockring off my bike and after talking with Scrod, spent hours attempting purposefully to force the cog to break free without a wrench and it stayed snug as sin until I gave up and purchased said wrench from Retrogression. I continued to ride without a lockring for 3 days without having it budge in anyway. And I was using an IRD canti on the front for safety; point being, you probably can snug it on their with the right tool and get away with the BB lockring as insurance and be safe as long as you're in control of the bike.
I would never ride brakeless only because with a wife and four kids, my insurance wouldn't pay a dime if they thought I was doing something "dangerous." So I play it safe and always have 1/2 brakes on the Devil.
I would never ride brakeless only because with a wife and four kids, my insurance wouldn't pay a dime if they thought I was doing something "dangerous." So I play it safe and always have 1/2 brakes on the Devil.
#12
Senior Member
Don't be such a ninny.
A friend of mine has put thousands of miles on a bike with a track cog on a freewheel hub and I don't think he's using a BB lock ring. He may be using Loctite, but I think he just tightened the cog RFT. If the cog were to come loose it's not like the bike explodes. All of his bikes have at least a front brake, most with two.
Yes, a proper track hub is ideal, but that wasn't the OP's question.
A friend of mine has put thousands of miles on a bike with a track cog on a freewheel hub and I don't think he's using a BB lock ring. He may be using Loctite, but I think he just tightened the cog RFT. If the cog were to come loose it's not like the bike explodes. All of his bikes have at least a front brake, most with two.
Yes, a proper track hub is ideal, but that wasn't the OP's question.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
#13
Senior Member
Once when I was skidding like a maniac in the parking lot across the street from the shop trying to get the cog to loosen up/fail, I snapped the non drive side crank arm instead (it was just a cheapo crank but still). I'd say the cog isn't going anywhere...
I'll probably throw a brake on one of these days.
By the way: I'm not saying everyone should go out and ride a brakeless fixed gear bike equipped with a suicide hub at maximum speed and busting mad skidz in busy downtown traffic. I'm just saying that in my experience, I have had no trouble and most "reports" of how completely unsafe it is are typically made by people who have never done it.
#14
%#&*#%>?%
Join Date: Feb 2008
Location: Mass
Posts: 845
Bikes: Pake,Shogun,Nishiki,Motobecane
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
FWIW I put a cog on a old mtb hub for a snowbeater using red loctite(done proper with clean,de-greased threads and 48 hrs curetime) and was unable to get it off when i didn't like the gearing. Not with a chainwhip,not with the cog in a vise turning the wheel, had to change the chainring instead.
#15
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,812
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3597 Post(s)
Liked 3,421 Times
in
1,946 Posts
FWIW I put a cog on a old mtb hub for a snowbeater using red loctite(done proper with clean,de-greased threads and 48 hrs curetime) and was unable to get it off when i didn't like the gearing. Not with a chainwhip,not with the cog in a vise turning the wheel, had to change the chainring instead.
#16
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,630
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,571 Times
in
1,579 Posts
#17
Your cog is slipping.
#18
Junior Member
Thread Starter
Join Date: Oct 2012
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#22
one life on two wheels
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 18 Times
in
15 Posts
Ugh, ss/fg is so full of contrarians....
I'm using a fixed cog on a freewheel hub with a BB lockring, no loctite. No problems here after a couple thousand miles on the bike. I used this tool to install: https://www.worldclasscycles.com/shimano_chain_whip.htm It works for both fixed lockrings and BB lockrings, both 3/32 and 1/8 chains. Quite handy.
I'm using a fixed cog on a freewheel hub with a BB lockring, no loctite. No problems here after a couple thousand miles on the bike. I used this tool to install: https://www.worldclasscycles.com/shimano_chain_whip.htm It works for both fixed lockrings and BB lockrings, both 3/32 and 1/8 chains. Quite handy.
#24
Senior Member
#25
Senior Member
Join Date: Apr 2012
Location: Minneapolis, MN
Posts: 211
Bikes: 1991 Eddie Merckx Corsa, 1991 Cannondale 3.0 Road Race, 2008 Bianchi Pista
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have used the rotafix method with success (no cog loosenings) for >2 years.
I prefer a track hub when convenient, because it's either no more dangerous, or safer. I rotafix the cog with a lockring anyway to ensure I don't strip the threads of my hub. Maybe the lockring is superfluous in this arrangement.
I prefer a track hub when convenient, because it's either no more dangerous, or safer. I rotafix the cog with a lockring anyway to ensure I don't strip the threads of my hub. Maybe the lockring is superfluous in this arrangement.