Was there a "Jump the Shark" moment for high flange hubs?
08-13-19, 08:56 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2010
Location: south kansas america
Posts: 1,910
Bikes: too many
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 411 Post(s)
Liked 234 Times
in
140 Posts
Was there a "Jump the Shark" moment for high flange hubs?
I've always liked the look of high flanged hubs... but, truth be told, I've become a heavy swooner for 70's bicycle aesthetics. I just have a few questions to ask others with better knowledge and memories than myself, 1) was there a definitive year when low flange hubs truly became a design detail to signify that a wheel was "modern", and 2) was there some written word, like a voice (or pen) within the bicycle circles of the time, who reviewed high flange hubs verses low flange hubs, and made their determinations known, and in doing so, defined a "jump the shark" moment for high flange hubs?
08-13-19, 10:01 PM
#2
weapons-grade bolognium
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,343
Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 2,373 Times
in
890 Posts
More worried about finding "short stem" presta tubes...
Likes For thinktubes:
08-13-19, 10:22 PM
#3
framebuilder
High flange hubs (I love the look) started to go out with the beginning of free hubs. They were totally gone when freewheels were no longer being used because 8 speed cassettes became the norm.
08-13-19, 10:37 PM
#4
Senior Member
No, not a single moment. Both high and low flange were available throughout the 70s. Eddy preferred low flange, IIRC... Popularity of high flange slowly waned. By the early to mid 80s, mostly the attitude was sort of a bored, "Why bother?", but there was no jump the shark moment. Whatever technical advantage they were at one time thought to provide was slowly deemed irrelevant.
Likes For Salamandrine:
08-14-19, 01:05 AM
#5
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
I'm guessing low-flange hubs can be made stronger, lighter. Don't know how to calculate weight of the the extra spoke length involved, but I'm guessing it beats the extra flange diameter by a few grams.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
Last edited by Lascauxcaveman; 08-14-19 at 01:09 AM.
08-14-19, 02:21 AM
#6
Senior Member
08-14-19, 05:54 AM
#7
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,506
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2419 Post(s)
Liked 4,381 Times
in
2,090 Posts
Because C&V'ers wanted modern high-flange hubs and were willing to pay for them. These two brands delivered.
Both of those products were introduced to the market less than 15 years ago; they didn't continue the trend through the eras.
-Kurt
Both of those products were introduced to the market less than 15 years ago; they didn't continue the trend through the eras.
-Kurt
__________________
08-14-19, 05:55 AM
#8
Senior Member
Around '75-76. Small flange hubs were the trend. I remember ordering a pair of Campy small flange hubs from an ad in Bicycling or Bike World. $45 a pair. Retail back then was about $80. Took about 6 weeks for delivery.
About the same time the Hi-lo flange rear hub was popular too. That was popularized by frame builder Hugo Rickert at the '72 Olympics.
About the same time the Hi-lo flange rear hub was popular too. That was popularized by frame builder Hugo Rickert at the '72 Olympics.
08-14-19, 06:11 AM
#9
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,463
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1824 Post(s)
Liked 3,366 Times
in
1,572 Posts
As noted, it seemed to be less of a sudden change and more of a gradual shift.
I've got a 1974 Raleigh catalog as well as a 1976 Raleigh catalog. In the '74 catalog, all of the bikes with dropped bars were sporting high flange hubs. Here's the page for the Team Professional, the top of the line bike:
By 1976, the Team Professional was fitted with small flange hubs, while the remainder of the line-up were shown with high flange. To me, this suggests that small flange were the more desirable version.
I'll admit that I started building my wheels with small flange hubs at this time too.... I guess I'm just a sucker for good marketing (as evidenced by the fact that I currently own a Team Pro)
Steve in Peoria
I've got a 1974 Raleigh catalog as well as a 1976 Raleigh catalog. In the '74 catalog, all of the bikes with dropped bars were sporting high flange hubs. Here's the page for the Team Professional, the top of the line bike:
By 1976, the Team Professional was fitted with small flange hubs, while the remainder of the line-up were shown with high flange. To me, this suggests that small flange were the more desirable version.
I'll admit that I started building my wheels with small flange hubs at this time too.... I guess I'm just a sucker for good marketing (as evidenced by the fact that I currently own a Team Pro)
Steve in Peoria
08-14-19, 06:22 AM
#10
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,433
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5887 Post(s)
Liked 3,469 Times
in
2,079 Posts
I've always liked the look of high flanged hubs... but, truth be told, I've become a heavy swooner for 70's bicycle aesthetics. I just have a few questions to ask others with better knowledge and memories than myself, 1) was there a definitive year when low flange hubs truly became a design detail to signify that a wheel was "modern", and 2) was there some written word, like a voice (or pen) within the bicycle circles of the time, who reviewed high flange hubs verses low flange hubs, and made their determinations known, and in doing so, defined a "jump the shark" moment for high flange hubs?
One downside is the lack of water bottle braze ons but a camelbak takes care of that for a long ride. Another potential downside is the 120 mm rear which limits you to 5 in the back.
08-14-19, 07:01 AM
#11
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,921
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,087 Times
in
637 Posts
I saw the thread title, and expected that someone had encountered an EXTREMELY High Flanged hub, and was hoping to see the picture. (this because of my understanding of the meaning of the phrase, "Jump the Shark") Hoping there's someone who can oblige my curiosity. 
__________________
In search of what to search for.
In search of what to search for.
Likes For USAZorro:
08-14-19, 07:04 AM
#12
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,421
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 624 Times
in
399 Posts
For me, somewhere around 2065. My daily ride is LF but those just seem so much easier to find. For other bikes most of my wheels are HF and I hope to keep them that way.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Likes For tiger1964:
08-14-19, 07:35 AM
#13
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,393 Times
in
694 Posts
My personal memory is that high flange was IT, and ONLY high-flange would do. Sad but true - c.1975, the criteria for a good bike in my circle was alloy cotter-less crank (no matter how chintzy a swaged unit it might be!), chrome socks on the front forks, quick-release hubs, and above all high-flange. That's what all the magazines said, right?
By 1978 or so, when I got my first custom wheels, I was ready to go from high-flange Normandy Luxe Competitions to low-flange Weyless sealed-bearing hubs, because if low-flange was good enough for Eddy Merckx, well ...
By 1978 or so, when I got my first custom wheels, I was ready to go from high-flange Normandy Luxe Competitions to low-flange Weyless sealed-bearing hubs, because if low-flange was good enough for Eddy Merckx, well ...
08-14-19, 08:24 AM
#14
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,107
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,018 Times
in
664 Posts
I think the bike business is a lot like other businesses were fashion is important. There are the trend setters, like Merckx and then we all follow. You can see this with a lot of trends in the bike business. Skinwall tires are another example. As for a moment in time, I don't think so unless there was a Huffy or something sporting big, high flange hubs.
08-14-19, 08:26 AM
#15
Senior Member
Join Date: Jan 2016
Posts: 3,438
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 872 Post(s)
Liked 2,269 Times
in
1,272 Posts
I have Campy High Flange hubs on a few of my bikes and they are truly my favorites.Of course the Record are the nicer ones but the Tipo look nice and roll reasonably smooth. Joe joesvintageroadbikes.wordpress
08-14-19, 08:29 AM
#16
Senior Member
Join Date: May 2014
Posts: 2,537
Bikes: yes
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1281 Post(s)
Liked 643 Times
in
329 Posts
It means "this once good thing has now became absurd and dragged out or has crossed over into stupidity and irrelevance."
It comes from an episode late in the run of Happy Days involving an absurd plotline in which Fonzie jumps over a shark while water skiing. It is generally recognized as the period when the show went into a rapid decline in quality.
Source: five seconds on google.
Likes For ksryder:
08-14-19, 08:42 AM
#17
Senior Member
As noted, it seemed to be less of a sudden change and more of a gradual shift.
I've got a 1974 Raleigh catalog as well as a 1976 Raleigh catalog. In the '74 catalog, all of the bikes with dropped bars were sporting high flange hubs. Here's the page for the Team Professional, the top of the line bike:
By 1976, the Team Professional was fitted with small flange hubs, while the remainder of the line-up were shown with high flange. To me, this suggests that small flange were the more desirable version.
I'll admit that I started building my wheels with small flange hubs at this time too.... I guess I'm just a sucker for good marketing (as evidenced by the fact that I currently own a Team Pro)
Steve in Peoria
I've got a 1974 Raleigh catalog as well as a 1976 Raleigh catalog. In the '74 catalog, all of the bikes with dropped bars were sporting high flange hubs. Here's the page for the Team Professional, the top of the line bike:
By 1976, the Team Professional was fitted with small flange hubs, while the remainder of the line-up were shown with high flange. To me, this suggests that small flange were the more desirable version.
I'll admit that I started building my wheels with small flange hubs at this time too.... I guess I'm just a sucker for good marketing (as evidenced by the fact that I currently own a Team Pro)
Steve in Peoria
SP
Nwpt, OR
08-14-19, 08:53 AM
#18
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,463
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1824 Post(s)
Liked 3,366 Times
in
1,572 Posts
The Harden "Bacon Slicer" hubs come to mind.
Harden Hubs
Curtis Odom has done some modern hubs that seem inspired by these. Here's a shot of a show bike by Cherubim that is sporting the Curtis Odom hubs, on display at the 2015 NAHBS.
Steve in Peoria
08-14-19, 09:11 AM
#19
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,746
Bikes: Yes, Please.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times
in
222 Posts
Jumping the shark in VT, Spring 1975
And then there were those of us who thought about it "scientifically". In 1974 my wheels were high flange, it's what "everybody" rode. Over the winter, I tied and soldered the 3x db spokes of my wheel 36h Record hf hub, with Arc-en-Ciel rim. I built a radial 32h db spoked wheel on a Record lf hub using a Medaille d' or rim. That was my race set up from then on. High rear, Low front. 
08-14-19, 09:29 AM
#20
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
Here ya go:
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
08-14-19, 10:54 AM
#22
Junior Member
As noted, it seemed to be less of a sudden change and more of a gradual shift.
I've got a 1974 Raleigh catalog as well as a 1976 Raleigh catalog. In the '74 catalog, all of the bikes with dropped bars were sporting high flange hubs. Here's the page for the Team Professional, the top of the line bike:
By 1976, the Team Professional was fitted with small flange hubs, while the remainder of the line-up were shown with high flange. To me, this suggests that small flange were the more desirable version.
I'll admit that I started building my wheels with small flange hubs at this time too.... I guess I'm just a sucker for good marketing (as evidenced by the fact that I currently own a Team Pro)
Steve in Peoria
I've got a 1974 Raleigh catalog as well as a 1976 Raleigh catalog. In the '74 catalog, all of the bikes with dropped bars were sporting high flange hubs. Here's the page for the Team Professional, the top of the line bike:
By 1976, the Team Professional was fitted with small flange hubs, while the remainder of the line-up were shown with high flange. To me, this suggests that small flange were the more desirable version.
I'll admit that I started building my wheels with small flange hubs at this time too.... I guess I'm just a sucker for good marketing (as evidenced by the fact that I currently own a Team Pro)
Steve in Peoria
08-14-19, 11:05 AM
#23
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,463
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1824 Post(s)
Liked 3,366 Times
in
1,572 Posts
wait a second, you can't drop that kind of bike porn in our laps and not tell us anything about it!!
is it new or vintage?
Who made it?
how did you get it?
The whole "let's rivet some big flanges to a hub shell" thing is a curious style of hub, and is something I was searching for when I offered the Harden Bacon Slicers as an example. Thanks for reading my mind and coming up with an answer!
Steve in Peoria
is it new or vintage?
Who made it?
how did you get it?
The whole "let's rivet some big flanges to a hub shell" thing is a curious style of hub, and is something I was searching for when I offered the Harden Bacon Slicers as an example. Thanks for reading my mind and coming up with an answer!
Steve in Peoria
08-14-19, 11:10 AM
#24
Senior Member
Join Date: Aug 2015
Location: Kingdom of Hawai'i
Posts: 1,196
Bikes: Peugeot, Legnano, Fuji, Zunow, De Rosa, Miyata, Bianchi, Pinarello, Specialized, Bridgestone, Cinelli, Merckx
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 429 Post(s)
Liked 467 Times
in
215 Posts
For everyone who came to the thread looking for sharkjumpy hubs.
Phil Cheese Shredder hubs -- not from the 70's but geesh.
Phil Cheese Shredder hubs -- not from the 70's but geesh.
Likes For billytwosheds:
08-14-19, 11:23 AM
#25
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,463
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1824 Post(s)
Liked 3,366 Times
in
1,572 Posts
The '74 catalog also shows the QR skewer lever pointed down, although the on-topic high flange helps obscure the weirdness.
A person might be charitable and say "well, they just happened to have one or two bikes slip through with that mispositioned QR lever". Unfortunately... that ain't the case.
The 1974 Raleigh Pro, although it also puts the lever on the bike's right side:
The 1974 Raleigh International:
The image of the Competiton is different, and might be obscuring the view of an offending skewer. I'll make the presumption of innocence and not show the image.
The 1974 Raleigh Gran Sport:
It's pretty hard to see the skewer in an image this size, so here's a link to the full resolution shot, if you are curious....
https://live.staticflickr.com/8422/2...410d7f_o_d.jpg
The 1974 Raleigh Super Course Mk. II (I do love that green!)
and even the 1974 Raleigh Gran Prix was not spared the shame of the droopy skewer lever...
Steve in Peoria
A person might be charitable and say "well, they just happened to have one or two bikes slip through with that mispositioned QR lever". Unfortunately... that ain't the case.
The 1974 Raleigh Pro, although it also puts the lever on the bike's right side:
The 1974 Raleigh International:
The image of the Competiton is different, and might be obscuring the view of an offending skewer. I'll make the presumption of innocence and not show the image.
The 1974 Raleigh Gran Sport:
It's pretty hard to see the skewer in an image this size, so here's a link to the full resolution shot, if you are curious....
https://live.staticflickr.com/8422/2...410d7f_o_d.jpg
The 1974 Raleigh Super Course Mk. II (I do love that green!)
and even the 1974 Raleigh Gran Prix was not spared the shame of the droopy skewer lever...
Steve in Peoria
