About sound of wire and toptube
#1
Junior Member
Thread Starter
About sound of wire and toptube
my frame is pinarello f10 and super record 12s mechanical.
after build at lbs, I found that the rear brake wire which go through the frame top tube get a sound touch the tube when brake.even when riding on uneven road.
so plz tell me how to do to avoid the problem?
a mechanic at other lbs told me that using inner lead wire to avoid that sound.
so could you guys tell me where to buy that wire used in the topbue?
sound video https://photos.app.goo.gl/uoCiAAr9XEzNhcXh7
so do you guys know that just only my pinarello f10 like that or it's a common? or just only with cp sr 12s?
after build at lbs, I found that the rear brake wire which go through the frame top tube get a sound touch the tube when brake.even when riding on uneven road.
so plz tell me how to do to avoid the problem?
a mechanic at other lbs told me that using inner lead wire to avoid that sound.
so could you guys tell me where to buy that wire used in the topbue?
sound video https://photos.app.goo.gl/uoCiAAr9XEzNhcXh7
so do you guys know that just only my pinarello f10 like that or it's a common? or just only with cp sr 12s?
Last edited by cycling2012; 09-15-19 at 11:20 AM.
#2
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,817
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,258 Times
in
663 Posts
Sometimes you can thread a small rubber O ring, a couple of them, to act as a buffer so you don't that annoying "tink" over every bump. can drive you crazy !
Mark Petry
Bainbridge Island, WA USA
Mark Petry
Bainbridge Island, WA USA
#3
Junior Member
Thread Starter
#4
Junior Member
__________________
“He's all over his machine” - Phil Liggett
“He's all over his machine” - Phil Liggett
#5
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,817
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,258 Times
in
663 Posts
Your shop should be able to help you with this. If not, order these
https://www.ebay.com/itm/20-40pcs-Bi.../303238337631?
Undo the brake cable and thread these onto it between the cable stops. If you have an internally routed cable, which I think you might, it gets more complicated than I can help you with "virtually". Sorry
Mark Petry
Bainbridge Island, WA USA
https://www.ebay.com/itm/20-40pcs-Bi.../303238337631?
Undo the brake cable and thread these onto it between the cable stops. If you have an internally routed cable, which I think you might, it gets more complicated than I can help you with "virtually". Sorry
Mark Petry
Bainbridge Island, WA USA
#6
Junior Member
Thread Starter
#7
Junior Member
Thread Starter
Your shop should be able to help you with this. If not, order these
https://www.ebay.com/itm/20-40pcs-Bi.../303238337631?
Undo the brake cable and thread these onto it between the cable stops. If you have an internally routed cable, which I think you might, it gets more complicated than I can help you with "virtually". Sorry
Mark Petry
Bainbridge Island, WA USA
https://www.ebay.com/itm/20-40pcs-Bi.../303238337631?
Undo the brake cable and thread these onto it between the cable stops. If you have an internally routed cable, which I think you might, it gets more complicated than I can help you with "virtually". Sorry
Mark Petry
Bainbridge Island, WA USA
#8
Junior Member
Thread Starter
Your shop should be able to help you with this. If not, order these
https://www.ebay.com/itm/20-40pcs-Bi.../303238337631?
Undo the brake cable and thread these onto it between the cable stops. If you have an internally routed cable, which I think you might, it gets more complicated than I can help you with "virtually". Sorry
Mark Petry
Bainbridge Island, WA USA
https://www.ebay.com/itm/20-40pcs-Bi.../303238337631?
Undo the brake cable and thread these onto it between the cable stops. If you have an internally routed cable, which I think you might, it gets more complicated than I can help you with "virtually". Sorry
Mark Petry
Bainbridge Island, WA USA
#9
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
A length of soft tubing such as vinyl aquarium tubing can also be used to keep the wire from tapping the top tube, and might be easier to thread on than the linked items.
Likes For dsbrantjr: