Stella French bike
#26
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,237 Times
in
653 Posts
DT Lugs? It's a lugless frame?
Lugs are the thin steel sleeves that the 3 main tubes are brazed into on a lugged frame bike.
On inexpensive bikes like your Stella, lugless construction was a cost savings method of assembling a frame.
I saw very few lugless French bike boom models. I don't recall ever seeing a frame failure on one of them but it was common on CHEAP American made brazed or welded lugless department store bikes.
You did a nice job of fixing it up. Enjoy the fruits of your labor.
BTW, my snobbish attitude towards cheap bikes comes from working on some of them during the bike boom days of the early 70's.
Those bikes usually had cheap components that barely worked when new, very cheap cables and housing that all needed replacement plus frequently they were poorly assembled at the factory in Europe.
The amount of time spent repairing and sometimes even reassembling those bikes to get them to work properly amounted to more labor costs than the bikes were worth and in the end, the owner still had a cheap bike!
We wouldn't let department store bikes into our shop for all of the above reasons plus the liability factor of having worked on a bike that was unsafe before it left the factory! KID KILLERS!
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Last edited by verktyg; 07-08-19 at 12:05 AM.
#27
Senior Member
Thread Starter
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
DT Lugs? Please explain what you are referring to?
Lugs are the thin steel sleeves that the 3 main tubes are brazed into on a lugged frame bike.
On inexpensive bikes like your Stella, lugless construction was a cost savings method of assembling a frame.
I saw very few lugless French bike boom models. I don't recall ever seeing a frame failure on one of them but it was common on CHEAP American made brazed or welded lugless department store bikes.
You did a nice job of fixing it up. Enjoy the fruits of your labor.
BTW, my snobbish attitude towards cheap bikes comes from working on some of them during the bike boom days of the early 70's.
Those bikes usually had cheap components that barely worked when new, very cheap cables and housing that all needed replacement plus frequently they were poorly assembled at the factory in Europe.
The amount of time spent repairing and sometimes even reassembling those bikes to get them to work properly amounted to more labor costs than the bikes were worth and in the end, the owner still had a cheap bike!
We wouldn't let department store bikes into our shop for all of the above reasons plus the liability factor of having worked on a bike that was unsafe before it left the factory! KID KILLERS!
verktyg
Lugs are the thin steel sleeves that the 3 main tubes are brazed into on a lugged frame bike.
On inexpensive bikes like your Stella, lugless construction was a cost savings method of assembling a frame.
I saw very few lugless French bike boom models. I don't recall ever seeing a frame failure on one of them but it was common on CHEAP American made brazed or welded lugless department store bikes.
You did a nice job of fixing it up. Enjoy the fruits of your labor.
BTW, my snobbish attitude towards cheap bikes comes from working on some of them during the bike boom days of the early 70's.
Those bikes usually had cheap components that barely worked when new, very cheap cables and housing that all needed replacement plus frequently they were poorly assembled at the factory in Europe.
The amount of time spent repairing and sometimes even reassembling those bikes to get them to work properly amounted to more labor costs than the bikes were worth and in the end, the owner still had a cheap bike!
We wouldn't let department store bikes into our shop for all of the above reasons plus the liability factor of having worked on a bike that was unsafe before it left the factory! KID KILLERS!
verktyg
#28
Senior Member
Thread Starter
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
Sold the nice old girl to a young fella looking to commute to work from his girlfriend's house. The perfect job for a french bike! He fell in love with Stella at first sight. I made $24.17 not including any labor from two rebuilds (2 weeks). Not much money but I felt better about finding a home for this one than any previous bike. I have no worries that the bikes I have for sale will easily find a home eventually but Sella appealed to a very limited group of people. With a little upgrading Stella retained her french personality but became a little more capable of moving people around.
#29
Newbie
Join Date: Sep 2023
Posts: 4
Bikes: 83 Motobecane Grand touring- 14 countries in Europe, N Africa, Dominican Republic and much of the US,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Stella Memories
I just joined Bike Forums so I could thank you all for sharing your stories and pictures of Stella bikes. I purchased one in 1978 as part of a quest to ride a bike across the country. I had no idea what a Stella was but the used one I bought off an add stuck to a bulletin board in a shop in Madison WI became my constant companion for roughly 9,000 miles of touring back and forth across the country. (I even wrote a book about those trips ..."I Brake For Strangers") I was a novice and the French threading gave me fits at first but I loved that bike and the adventures it helped me through. Had to sell it a few years later and regret it to this day. I would love to add one to my collection but they are hard to find. I don't even still have a good picture of it but it was a deep blue color that when the sun shined on it just right it turned more of a purple.....like it was blushing....
Likes For Packerbacker:
#30
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26394 Post(s)
Liked 10,367 Times
in
7,198 Posts
__________________
#31
Newbie
Join Date: Sep 2023
Posts: 4
Bikes: 83 Motobecane Grand touring- 14 countries in Europe, N Africa, Dominican Republic and much of the US,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Found a Stella project!
Was up in Wisconsin this past week and decided to drop in on Budget Bicycle Shop in Madison. Evan had a couple Stellas. I went with this one which is the right size and roughly the same year of the one I rode across country and back in 1978-79. It's not the same beautiful blue I rode back then and obviously some components have been switched out like the brakes, HB tape for that God awful foam, and it needs brake covers and the always plentiful French threaded pedals. I'm tempted to repaint and try to upgrade some of these parts. Anyone have any suggestions on where I could purchase a new set of Stella stickers?? I'd post pictures but I'm a newbie so it wont allow me to??
Likes For Packerbacker:
#32
Junior Member
Join Date: May 2023
Location: Dickinson, ND
Posts: 194
Bikes: 2022 Ibis Ripmo AF, 2022 Cannondale Synapse, 2022 Ritchey Outback, 197(?) Manufrance Touring
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 56 Post(s)
Liked 152 Times
in
77 Posts
Was up in Wisconsin this past week and decided to drop in on Budget Bicycle Shop in Madison. Evan had a couple Stellas. I went with this one which is the right size and roughly the same year of the one I rode across country and back in 1978-79. It's not the same beautiful blue I rode back then and obviously some components have been switched out like the brakes, HB tape for that God awful foam, and it needs brake covers and the always plentiful French threaded pedals. I'm tempted to repaint and try to upgrade some of these parts. Anyone have any suggestions on where I could purchase a new set of Stella stickers?? I'd post pictures but I'm a newbie so it wont allow me to??
#33
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26394 Post(s)
Liked 10,367 Times
in
7,198 Posts
I guess you could ask him, to see whether he makes and sells any other Stella sets, but it's an uncommon marque, so a lot of the bike sticker guys don't make them.
__________________
#34
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26394 Post(s)
Liked 10,367 Times
in
7,198 Posts
#35
Newbie
Join Date: Sep 2023
Posts: 4
Bikes: 83 Motobecane Grand touring- 14 countries in Europe, N Africa, Dominican Republic and much of the US,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Thanks. I will check that site out. I have now removed all components from my new/old Stella and given the frame a good cleaning. It's just a simple stamped dropout frame but so was the one I rode so many years ago! Found what might be a serial number stamped on the left rear dropout. (K366). Any idea if this might give me a production year??
Thread
Thread Starter
Forum
Replies
Last Post
ElStellino
Classic & Vintage
51
11-13-14 06:46 PM
puchfinnland
Classic & Vintage
29
04-26-13 05:25 PM
Oldpeddaller
Classic & Vintage
16
12-01-12 09:13 PM