I hate carbon !!
#1
Banned.
Thread Starter
Join Date: Nov 2015
Posts: 2,077
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I hate carbon !!
Since I asked for a pro-carbon thread, and asked the anti-carbon opinions to stay away. I thought it best to have a separate place for the anti-carbon folks to vent their opinions.
Likes For Squeezebox:
#2
Banned
Join Date: May 2017
Posts: 384
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 285 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There's no other way to the lightest build except with carbon frame, fork and componentry. I do think it offers a more comfortable ride than aluminum. At least oversized aluminum. It's getting relatively affordable these days too.
I have to admit, I have fewer and fewer reservations about carbon these days. I wouldn't mind buying a carbon bike next time. I might stay away from the very lightest carbon builds though.
I have to admit, I have fewer and fewer reservations about carbon these days. I wouldn't mind buying a carbon bike next time. I might stay away from the very lightest carbon builds though.
#3
I don't hate carbon but I might if it failed liked these, especially on tour.
#4
Senior Member
Join Date: Apr 2015
Location: Metro Detroit/AA
Posts: 8,207
Bikes: 2016 Novara Mazama
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 3640 Post(s)
Liked 81 Times
in
51 Posts
Why would I care to vent about other people's decisions?
My steel trekking build came in right around 32#. I'm sure even if I laughed at the potential for their CF "assploding", they'd probably laugh at me for such a svetle build for a land of extreme hills, and no meaningful exchange of ideas would ever occur.
My steel trekking build came in right around 32#. I'm sure even if I laughed at the potential for their CF "assploding", they'd probably laugh at me for such a svetle build for a land of extreme hills, and no meaningful exchange of ideas would ever occur.
#5
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,610
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10954 Post(s)
Liked 7,483 Times
in
4,185 Posts
If there were a large demand for posters to just randomly rant about hating carbon, then they would do it on their own by starting threads about it. Look back- there just arent threads where the main topic is 'I hate carbon'. Only yours, really.
Strong work creating a demand though, I guess.
Oh- and I dont hate carbon. My wife has a bike with a carbon fork, I built a carbon road bike for my brother in law, my oldest niece rides on an old school carbon composite road bike(if anything, that things gonna snap), and one of my sister's bikes is carbon. I ride with people many times a week who have full carbon bikes and have helped maintain a couple of them this year.
Its a perfectly fine material, in general.
#6
Senior Member
i'm not aware of anyone who hates carbon.
it's just they don't have a need to force the utilization
of an overpriced material into a use for which it is
not as well suited as some "inferior" materials.
assuming bikes are spec'd and sized the same,
the difference between carbon and modern day
steel would be a smidge more than a pound.
and a smaller difference with aluminum.
(shouldn't there be an "i hate aluminium" thread?)
https://www.rodbikes.com/blog/tag/ste...-carbon-frame/
the yuuuuge increase in price just doesn't make up
for a minimal weight reduction (and increased risk
of damage). better use of funds would be for
lighter and more compact gear.
better yet, instead of an off-the-rack mass produced
chinese crabon frame that can sorta be used for
touring (if you squint), the same bucks will get you a
custom made steel touring frame.
aside from the ever present well-documented danger
of assploding, carbon currently just isn't as well suited
to touring.
it's just they don't have a need to force the utilization
of an overpriced material into a use for which it is
not as well suited as some "inferior" materials.
assuming bikes are spec'd and sized the same,
the difference between carbon and modern day
steel would be a smidge more than a pound.
and a smaller difference with aluminum.
(shouldn't there be an "i hate aluminium" thread?)
https://www.rodbikes.com/blog/tag/ste...-carbon-frame/
the yuuuuge increase in price just doesn't make up
for a minimal weight reduction (and increased risk
of damage). better use of funds would be for
lighter and more compact gear.
better yet, instead of an off-the-rack mass produced
chinese crabon frame that can sorta be used for
touring (if you squint), the same bucks will get you a
custom made steel touring frame.
aside from the ever present well-documented danger
of assploding, carbon currently just isn't as well suited
to touring.
Last edited by saddlesores; 05-12-17 at 08:51 AM.
#8
Senior Member
sorry about that.
i was wrong.
turns out the steel bike is lighter than carbon.
i was wrong.
turns out the steel bike is lighter than carbon.
#9
Banned
"Nothing Weighs Less than A Part not installed"
NB: The Pros Race Carbon bikes & components, With a Truck Full of Spares..
I like my Carbon Fiber Mandolin..
...
NB: The Pros Race Carbon bikes & components, With a Truck Full of Spares..
I like my Carbon Fiber Mandolin..
...
#10
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,901
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 1,926 Times
in
1,209 Posts
#11
Senior Member
You mean the steel bike with a CARBON fork? Unless they have same component spec and size, you can’t get any meaningful info out of relative complete bike weights.
If all was equal, I’d trust a light carbon frame over a light steel frame x10. We know carbon is a stronger material on a weight per weight basis.
If all was equal, I’d trust a light carbon frame over a light steel frame x10. We know carbon is a stronger material on a weight per weight basis.
#12
#13
Senior Member
You mean the steel bike with a CARBON fork? Unless they have same component spec and size, you can’t get any meaningful info out of relative complete bike weights.
If all was equal, I’d trust a light carbon frame over a light steel frame x10. We know carbon is a stronger material on a weight per weight basis.
If all was equal, I’d trust a light carbon frame over a light steel frame x10. We know carbon is a stronger material on a weight per weight basis.
One problem with carbon is that it is bonded with polymer, which dries and breaks down over time, and with exposure to uv light. Oscillation from riding and breakdown of perishable substances will eventually result in deterioration. The same thing happens to steel from oxygen and oscillation, but on a much slower scale.
I used to practice achery, and loved when carbon arrows were introduced. But then my shooting improved to the point that I was constantly splitting arrows, and carbon arrows are expensive. I went back to aluminum arrows, as I could straighten them out after hitting them with another arrow.
If you buy a light steel frame, and do the basics to keep it clean, your great grandchildren will be able to enjoy it when they are old enough to ride. I doibt the same could be said about carbon.
#14
Senior Member
Join Date: Mar 2017
Posts: 216
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I'd definitely ride one of those Rodriguez bikes over a carbon wonderbike...for lot's of reasons; style, ride qualities, and the fact that it's hand made in Washington, oh and it's not a specialized...I'd rather give profit to a great bike shop that actually builds bikes in house than feed a corporate bottom line.
#15
And we all know that spider web is stronger than carbon on a weight per weight basis, but I haven't seen a frame made of it yet. Steel has a high shear strength, you will not see carbon fiber used in nuts or bolts, which gives lie to the idea that carbon is stronger. There are only a couple ways in which carbon is stronger than steel, and many ways in which steel is stronger than carbon.
One problem with carbon is that it is bonded with polymer, which dries and breaks down over time, and with exposure to uv light. Oscillation from riding and breakdown of perishable substances will eventually result in deterioration. The same thing happens to steel from oxygen and oscillation, but on a much slower scale.
I used to practice archery, and loved when carbon arrows were introduced. But then my shooting improved to the point that I was constantly splitting arrows, and carbon arrows are expensive. I went back to aluminum arrows, as I could straighten them out after hitting them with another arrow.
If you buy a light steel frame, and do the basics to keep it clean, your great grandchildren will be able to enjoy it when they are old enough to ride. I doubt the same could be said about carbon.
One problem with carbon is that it is bonded with polymer, which dries and breaks down over time, and with exposure to uv light. Oscillation from riding and breakdown of perishable substances will eventually result in deterioration. The same thing happens to steel from oxygen and oscillation, but on a much slower scale.
I used to practice archery, and loved when carbon arrows were introduced. But then my shooting improved to the point that I was constantly splitting arrows, and carbon arrows are expensive. I went back to aluminum arrows, as I could straighten them out after hitting them with another arrow.
If you buy a light steel frame, and do the basics to keep it clean, your great grandchildren will be able to enjoy it when they are old enough to ride. I doubt the same could be said about carbon.
Last edited by BigAura; 05-13-17 at 04:59 AM.
#17
I don't know if there is a definitive problem, that's why I said concern. I realize that carbon bicycles are clear-coated with UV resistant(?) paint but I'm not sure how the grit-rain-sun exposure on an extended tour will effect it. I have heard that even a small cut/abrasion in the clear-coat can allow the fibers to soak in water and compromise the frame's integrity. I don't know the truthiness of this but it sounds logical.
Although steel frames are vulnerable to water, rust is not a fast process, with respect to compromising a frame's integrity. Plus steel is easily re-painted, stripped to the metal itself, not just touched up. I've re-painted my 40-yo steel bicycle several times, and it's still my daily ride.
As an aside, re-painting a bicycle a new color is nice and can be aesthetically pleasing. Don't know if carbon bikes could handle it.
Although steel frames are vulnerable to water, rust is not a fast process, with respect to compromising a frame's integrity. Plus steel is easily re-painted, stripped to the metal itself, not just touched up. I've re-painted my 40-yo steel bicycle several times, and it's still my daily ride.
As an aside, re-painting a bicycle a new color is nice and can be aesthetically pleasing. Don't know if carbon bikes could handle it.
#18
Senior Member
Join Date: Sep 2013
Location: Spain
Posts: 1,065
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 272 Post(s)
Liked 487 Times
in
236 Posts
I don't know if there is a definitive problem, that's why I said concern. I realize that carbon bicycles are clear-coated with UV resistant(?) paint but I'm not sure how the grit-rain-sun exposure on an extended tour will effect it. I have heard that even a small cut/abrasion in the clear-coat can allow the fibers to soak in water and compromise the frame's integrity. I don't know the truthiness of this but it sounds logical.
Although steel frames are vulnerable to water, rust is not a fast process, with respect to compromising a frame's integrity. Plus steel is easily re-painted, stripped to the metal itself, not just touched up. I've re-painted my 40-yo steel bicycle several times, and it's still my daily ride.
As an aside, re-painting a bicycle a new color is nice and can be aesthetically pleasing. Don't know if carbon bikes could handle it.
Although steel frames are vulnerable to water, rust is not a fast process, with respect to compromising a frame's integrity. Plus steel is easily re-painted, stripped to the metal itself, not just touched up. I've re-painted my 40-yo steel bicycle several times, and it's still my daily ride.
As an aside, re-painting a bicycle a new color is nice and can be aesthetically pleasing. Don't know if carbon bikes could handle it.
I have several friends who after some years got bored with their carbon paint design and painted their frames in new colours.. any problem if done by people who know what to do.
no concerns anywhere, just too much drama, some like carbon, some not, each buys what she/he thinks is best.
Last edited by str; 05-13-17 at 06:33 AM.
#19
Senior Member
Join Date: Jun 2012
Posts: 1,923
Bikes: Nature Boy 853 Disc, Pugsley SS
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 251 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
Friend of a friend hit a tree last week. The Whisky carbon fork was completely (visually) undamaged while the Surly ICT frame folded in half. Now, that fork is likely compromised too, but it's a demonstration of the impact resistance and relative strength of modern carbon. The entire bike folded before the steering tube (also carbon) failed.
I say modern carbon very specifically because there has been a long maturation period to the material, and improving technologies in ultrasound and manufacturing in the last decade or so has really brought things to a new level. Today's carbon is many orders of magnitude more reliable than the carbon bikes of the onset.
I have no reservations about carbon. I used to, but I don't anymore. I usually gravitate towards steel for aesthetics, but my list of other reasons (durability, vibration damping, ride feel) is getting shorter since Carbon bikes often out-perform Steel in all categories, even flex. Even budget-wise, it's getting more accessible, and the entry level frames today compare well to pro frames from two or three years ago.
Carbon today? Totally different animal. I have zero reservations.
#20
Nice visual! Thanks.
Personally I don't fear carbon, and I do own/ride a carbon bicycle, at times. Maybe you're right in that the duty-cycle of carbon bikes has improved greatly in recent years. As I've said, I'm ready for a functionally equivalent (or better!) touring bike made of carbon. It might be closer than I've been surmising
Personally I don't fear carbon, and I do own/ride a carbon bicycle, at times. Maybe you're right in that the duty-cycle of carbon bikes has improved greatly in recent years. As I've said, I'm ready for a functionally equivalent (or better!) touring bike made of carbon. It might be closer than I've been surmising
#21
#22
Senior Member
Join Date: Jun 2012
Posts: 1,923
Bikes: Nature Boy 853 Disc, Pugsley SS
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 251 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
Nice visual! Thanks.
Personally I don't fear carbon, and I do own/ride a carbon bicycle, at times. Maybe you're right in that the duty-cycle of carbon bikes has improved greatly in recent years. As I've said, I'm ready for a functionally equivalent (or better!) touring bike made of carbon. It might be closer than I've been surmising
Personally I don't fear carbon, and I do own/ride a carbon bicycle, at times. Maybe you're right in that the duty-cycle of carbon bikes has improved greatly in recent years. As I've said, I'm ready for a functionally equivalent (or better!) touring bike made of carbon. It might be closer than I've been surmising
Niner makes a carbon "adventure" / CX bike with front rack mounts, and the price isn't egregious:
RLT 9 RDO 2-STAR APEX 1
#23
Senior Member
Join Date: Jun 2015
Location: Down Under
Posts: 1,936
Bikes: A steel framed 26" off road tourer from a manufacturer who thinks they are cool. Giant Anthem. Trek 720 Multiroad pub bike. 10 kids bikes all under 20". Assorted waifs and unfinished projects.
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Liked 1,154 Times
in
640 Posts
All I want from a touring bike is that it can be thrown into a box or bag without too much thought. Packed up the bikes today. Straight into a box, wheels jammed along side the frame. I padded the outer ends of the axles so they don't tear through the boxes. Rack, seat whatever gets dumped in the box. If it can't survive I don't want it. Also needs to survive being dropped off a guard rail fully loaded.
#24
In my personal opinion, that bike already exists! Most of the current crop of carbon cyclocross bikes are rated for tougher conditions and abuse than a carbon road bike, for example. Thicker layups, stronger transitions between tubes, etc.
Niner makes a carbon "adventure" / CX bike with front rack mounts, and the price isn't egregious:
RLT 9 RDO 2-STAR APEX 1
Niner makes a carbon "adventure" / CX bike with front rack mounts, and the price isn't egregious:
RLT 9 RDO 2-STAR APEX 1