Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Anyone else have a problem with their butt sliding on a leather seat?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Anyone else have a problem with their butt sliding on a leather seat?

Old 07-10-19, 05:27 PM
  #1  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Anyone else have a problem with their butt sliding on a leather seat?

I just put a Brooks saddle on my 89 Ironman. I like the saddle except my butt keeps wanting to slide on it.
My other ironaman has a Fizik saddle which is more comfortable to me.
robertj298 is offline  
Old 07-10-19, 05:36 PM
  #2  
philbob57
Senior Member
 
Join Date: Jul 2013
Location: Chicago North Shore
Posts: 2,331

Bikes: frankenbike based on MKM frame

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 714 Post(s)
Liked 602 Times in 371 Posts
Slightly tilting the nose up can stop the sliding, but it might put more pressure on your soft bits. I was once able to ride Brooks-type leather as long as the nose was tilted up; now, 30 years later, my Brooks makes me numb.
philbob57 is offline  
Old 07-10-19, 06:10 PM
  #3  
davester
Senior Member
 
davester's Avatar
 
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,531

Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"

Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 926 Post(s)
Liked 1,281 Times in 482 Posts
Originally Posted by robertj298
I just put a Brooks saddle on my 89 Ironman. I like the saddle except my butt keeps wanting to slide on it.
My other ironaman has a Fizik saddle which is more comfortable to me.
If it's a B17, it should get indented by your sitz bones in a short while which will help stop that sliding. If it's a pro then I don't think it'll ever change. Also, the saddle tilt suggestion mentioned above should help.
davester is offline  
Old 07-10-19, 06:13 PM
  #4  
Kuromori
Senior Member
 
Join Date: Jan 2019
Posts: 528
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 237 Post(s)
Likes: 0
Liked 83 Times in 64 Posts
2-bolt seatpost designs really help with getting the angle just right. I personally don't find leather saddle more comfortable than an agreeable foam saddle, but it is more likely I'll find a Brooks agreeable than a random foam saddle.
Kuromori is offline  
Old 07-10-19, 06:16 PM
  #5  
HTupolev
Senior Member
 
Join Date: Apr 2015
Location: Seattle
Posts: 4,261
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1971 Post(s)
Liked 1,297 Times in 629 Posts
Originally Posted by robertj298
I just put a Brooks saddle on my 89 Ironman. I like the saddle except my butt keeps wanting to slide on it.
Tilt and position the saddle so that your butt sits on the part you want it to sit on without it pushing you around.
HTupolev is offline  
Old 07-10-19, 06:28 PM
  #6  
rayooo
Senior Member
 
rayooo's Avatar
 
Join Date: Feb 2019
Location: Allamuchy, NJ
Posts: 94

Bikes: Superfly-9.6, Domane-4.5 Emonda-SLR 9

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Liked 13 Times in 10 Posts
I've noticed over the ages that certain bike shorts slip different amounts (or slip very little) on specific seats to varying degrees. Sometimes what seems to be the same basic bike shorts fabric doesn't have the same friction factor on a given seat. Along with as mentioned seat tilt, have a look at different bike shorts.
rayooo is offline  
Old 07-10-19, 06:31 PM
  #7  
3alarmer 
Friendship is Magic
 
3alarmer's Avatar
 
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,932

Bikes: old ones

Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26248 Post(s)
Liked 10,231 Times in 7,100 Posts
...once you get a good balanced position on the saddle, you can also experiment with different waxes. Carnuba based waxes provide a little bit more of a surface than some of the beeswax based products. But the saddles have a smooth surface in order to minimize friction heat and chafing of the inner thigh, so unless you're willing to go with a different style of saddle, with a Brooks setting the angle for balance is your best solution.

In general, the angle of a leather suspension saddle that works for most of us is with the nose up much higher than you see with other saddles.
3alarmer is offline  
Old 07-10-19, 06:46 PM
  #8  
Last ride 76 
1/2 as far in 2x the time
 
Last ride 76's Avatar
 
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,935

Bikes: Yes, Please.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times in 222 Posts
Originally Posted by robertj298
I just put a Brooks saddle on my 89 Ironman. I like the saddle except my butt keeps wanting to slide on it.
My other ironaman has a Fizik saddle which is more comfortable to me.
Absolutely!

I do not remember it being a thing BITD, I guess except for my track saddle, which was plastic, the others were either buffalo or suede Unicanitor.
I thought I would prefer smooth, after all what's the advantage to thighs rubbing, right? I do want to try one of the saddles with the "no slip" system and smooth sides one of these days. I don't find the flat plates to be a problem, just the old school shape, in shiny polished leather,
Last ride 76 is offline  
Old 07-10-19, 07:42 PM
  #9  
RobbieTunes
Banned.
 
Join Date: Dec 2007
Posts: 27,297
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,407 Times in 908 Posts
My most comfortable saddle is a carbon non-padded perch from China. Precisely because it does not slide much, but when it does, the shorts/bibs slide on it. The grippier saddles I have, once it gets wet down there, grab the short/bib material, and the skin sliding inside that is not a good thing.
RobbieTunes is offline  
Old 07-10-19, 07:47 PM
  #10  
PilotFishBob 
So it goes.
 
PilotFishBob's Avatar
 
Join Date: Apr 2014
Location: W. Tennessee
Posts: 1,260

Bikes: A few. Quite a few.

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 432 Post(s)
Liked 634 Times in 260 Posts
+1 on the nose up fix for Brooks. I have several bikes equipped with B17s or Pros, some with cutouts and some without and I don't skid around on them. I only set them a couple of degrees nose-up from horizontal (visually it's hard to detect) but that's all it takes for me. No numbness issues. Saddles are very much a YMMV thing though.
PilotFishBob is online now  
Old 07-10-19, 08:34 PM
  #11  
canklecat
Me duelen las nalgas
 
canklecat's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 13,522

Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel

Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,798 Times in 1,798 Posts
Depends on the shorts material, as mentioned above. My various tighty and baggy shorts vary in slippy or grippy qualities so I tend to choose what to wear to suit the saddle on a particular bike.
canklecat is offline  
Old 07-10-19, 08:56 PM
  #12  
Chombi1 
Senior Member
 
Chombi1's Avatar
 
Join Date: Nov 2015
Posts: 4,457
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1629 Post(s)
Likes: 0
Liked 814 Times in 527 Posts
Just be careful you do not go overboard and tilt it back too much.....
It could be a painful and numbing experience......
Chombi1 is offline  
Old 07-10-19, 11:10 PM
  #13  
gugie 
Bike Butcher of Portland
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639

Bikes: It's complicated.

Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4669 Post(s)
Liked 5,768 Times in 2,272 Posts
I don't like a saddle that I stick to. I want a saddle that I can easily slide forward and back on for the same reason I like to move my hand position around - you don't want any single part of your body compressed against something for a long time. Hands and behinds get sore easily if you don't.

If you feel like you're always sliding forward in your saddle, it needs to be tilted up more. For most riders I know on a Brooks B17, adjusted properly it looks like it's tilted up, but you're really just sitting in the depressed area in the middle.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
gugie is online now  
Likes For gugie:
Old 07-11-19, 04:46 AM
  #14  
horatio 
Hump, what hump?
 
horatio's Avatar
 
Join Date: Dec 2003
Location: SC midlands
Posts: 1,937

Bikes: See signature

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 227 Times in 145 Posts
Thanks for posting. Just mounted my first Brooks and appreciate the tips. No problem with slipping/sliding, as it’s been used, but it will take some experimentation with the tilt. The best saddle for my hiney and taint has been the Specialized Riva, now obsolete.
__________________
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports


horatio is offline  
Old 07-11-19, 06:09 AM
  #15  
Salamandrine 
Senior Member
 
Join Date: Oct 2015
Location: Los Angeles
Posts: 6,287

Bikes: 78 Masi Criterium, 68 PX10, 2016 Mercian King of Mercia, Rivendell Clem Smith Jr

Mentioned: 120 Post(s)
Tagged: 0 Thread(s)
Quoted: 2317 Post(s)
Liked 597 Times in 430 Posts
To me, the slippery nature of a Brooks is plus. I constantly shift around slightly. IME it's kind of bad to be glued to one spot, and I absolutely hate grippy saddles. Suede Turbos only worked BITD because the suede wore off after a week or so, leaving a smooth leather saddle.

If you slipping off, it's probably because the saddle angle is off. Default starting point should be dead level or close to it. Dialing it in should leave you adjusting at most a few degrees up or down - depending on your riding position. If you must have the saddle tilted down significantly to avoid pain, you are running the wrong saddle for you and your shape, IMO.
Salamandrine is offline  
Likes For Salamandrine:
Old 07-11-19, 06:30 AM
  #16  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,672

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
sometimes, a brooks needs to look like this to keep you from sliding forward and consequently putting to much weight on your hands. And, maybe I'm kidding when I say, "You never should have put that brooks on your Ironman."

Classtime is offline  
Old 07-11-19, 06:51 AM
  #17  
Phil_gretz
Zip tie Karen
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006

Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times in 806 Posts
Two Thoughts...

...that may sound contrarian, but they're meant to help. First, the top tube length and stem length may be creating an unnatural reach for you. Your body is adjusting by "creeping" to the more natural reach. The sliding may be a clue.

Second, why put a Brooks B-17 on an Ironman? Why not a slimmer, lighter racing saddle?
Phil_gretz is offline  
Old 07-11-19, 07:15 AM
  #18  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,853

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 654 Times in 498 Posts
Originally Posted by rayooo
I've noticed over the ages that certain bike shorts slip different amounts (or slip very little) on specific seats to varying degrees. Sometimes what seems to be the same basic bike shorts fabric doesn't have the same friction factor on a given seat. Along with as mentioned seat tilt, have a look at different bike shorts.
The goal is to position the saddle fore-aft so your butt bones are where they need to be for best pedaling, and tilting the saddle just a bit up or down so gravity helps you stay there. Tilting up or down also helps focus butt pressure so it is on your sit bones rather than on the perineum or on the creases at the top of the inner thigh, for example. If your sitbones are back so far you are on the metal cantle plate, the saddle is too far forward to suit your body. If the sides of the sit bones are on teh steel cantle plate, your saddle is too narrow - change from a B17N to a Professional or from a Professional to a B17. The widths of all the different versions of B17 except for the B17S, B17S Imperial, B17N and B17N Imperial are the same.
Road Fan is offline  
Old 07-11-19, 07:19 AM
  #19  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,853

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 654 Times in 498 Posts
Originally Posted by Salamandrine
To me, the slippery nature of a Brooks is plus. I constantly shift around slightly. IME it's kind of bad to be glued to one spot, and I absolutely hate grippy saddles. Suede Turbos only worked BITD because the suede wore off after a week or so, leaving a smooth leather saddle.

If you slipping off, it's probably because the saddle angle is off. Default starting point should be dead level or close to it. Dialing it in should leave you adjusting at most a few degrees up or down - depending on your riding position. If you must have the saddle tilted down significantly to avoid pain, you are running the wrong saddle for you and your shape, IMO.
It could also be that your saddle is too high. The hips should not be rocking. Rocking hips indicates that you are stretching your leg down at the bottom of each stroke. The back and forth once each pedal cycle causes abrasion, usually on the perineum or a little behind it - both are bad news!
Road Fan is offline  
Old 07-11-19, 07:49 AM
  #20  
ksryder
Senior Member
 
Join Date: May 2014
Posts: 2,549

Bikes: yes

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1281 Post(s)
Liked 643 Times in 329 Posts
If you're using chamois cream, the sliding will be significantly reduced if you also wear shorts.
ksryder is offline  
Old 07-11-19, 07:54 AM
  #21  
Last ride 76 
1/2 as far in 2x the time
 
Last ride 76's Avatar
 
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,935

Bikes: Yes, Please.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times in 222 Posts
I don't mean GRIP like unable to shift my position on the saddle... I mean it more like: Opposed to what happens when I ride the Turbo Lite in the picture below with current spandex(?) Shorts. My old shorts were wool, or mostly wool, but relatively smooth, as were the Unicanitor saddles after a few hundred miles. It must have been a good combo, because the issue never even came up for me. On this saddle I feel like a puck on an air-hockey table. It also hurt, because I couldn't just "sit". Saddles that look quite similar, to my eye, if not slippery slick, are comfortable enough. It is only this saddle that just... and I've put it on 3 different bikes, without success. I wanted to make it work, I like the way it looks, it's super light, and nicely padded.. Reading this thread, and thinking some more, it's time to take a tape and see what the relevant measurements really are.

Probably another facepalm moment coming. But it looks ok...




2 shots this Spring showing the glossy surface. The surface has not become less slippery over time, obviously.




Light, padded, and looks good. if it looks off, disregard appearances, the top of the saddle was dead level.

Last edited by Last ride 76; 07-11-19 at 08:05 AM.
Last ride 76 is offline  
Old 07-11-19, 09:34 AM
  #22  
machinist42
mycocyclist
 
machinist42's Avatar
 
Join Date: Dec 2016
Location: Monkey Junction, Wilmington, NC
Posts: 2,239

Bikes: 1964 Schwinn Paramount P-13 DeLuxe, 1964 Schwinn Sport Super Sport, 1972 Falcon San Remo, 1974 Maserati MT-1, 1974 Raleigh International, 1984 Lotus Odyssey, 198? Rossin Ghibli, 1990 LeMond Le Vanquer (sic), 1991 Specialized Allez Transition Pro, +

Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 901 Post(s)
Liked 802 Times in 441 Posts
Ghlib Response

Anyone else have a problem with their butt sliding on a leather seat?


Not when I'm naked.
machinist42 is offline  
Old 07-11-19, 10:29 AM
  #23  
davester
Senior Member
 
davester's Avatar
 
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,531

Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"

Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 926 Post(s)
Liked 1,281 Times in 482 Posts
Originally Posted by Classtime
sometimes, a brooks needs to look like this to keep you from sliding forward and consequently putting to much weight on your hands. And, maybe I'm kidding when I say, "You never should have put that brooks on your Ironman."

When I see a saddle tilted up at an anomalously steep angle like this, it tells me that the seat is too far forward relative to the pedals. If you could slide the seat backwards a bit then you wouldn't need such an extreme tilt to keep you from sliding towards the bars. Unfortunately, Brooks saddles have limited fore-aft adjustment (particulary a problem for tall folks with large frames like this one) so you'd probably need to get a different seatpost with a larger setback. Another likely contributing factor to the seat angle is that you have a Brooks Professional, which is a racing saddle designed for a rider who is in the drops cranking hard most of the time. A B-17, designed for more upright riding (i.e. touring) may work better and will likely be much more comfortable (doesn't look as pretty as the Pro though).
davester is offline  
Old 07-11-19, 11:03 AM
  #24  
Last ride 76 
1/2 as far in 2x the time
 
Last ride 76's Avatar
 
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,935

Bikes: Yes, Please.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times in 222 Posts
Originally Posted by machinist42

Anyone else have a problem with their butt sliding on a leather seat?


Not when I'm naked.
I'd have to be a lot faster and a lot better looking for that to work in suburban NJ for more than a few minutes.
Last ride 76 is offline  
Old 07-11-19, 12:49 PM
  #25  
squirtdad
Senior Member
 
squirtdad's Avatar
 
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,854

Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque

Mentioned: 104 Post(s)
Tagged: 0 Thread(s)
Quoted: 2304 Post(s)
Liked 2,739 Times in 1,498 Posts
IME depends on the brooks saddle. I have a b17 on and upgright postition bike. I need the rear of the saddle parrallel to the ground, which put the nose up a little bit. i slipped before I did that.

I have swift on my de rosa.... (and on my RIP miyata before) that one has the nose down a degree or so from flat. but no sliding
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)



squirtdad is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.