FS spring cleaning II some Campy parts + etc
05-18-15, 11:34 AM
#1
Senior Member
Thread Starter
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
FS spring cleaning II some Campy parts + etc
ALL SOLD. thanks!
[strike]Campy Victory derailleurs
1 RD, 1 FD clamp-on, 1 FD braze-on.
all in very good condition. no rusty or damaged part except some minimal ride-rubs. tangy springs.
pulleys have no cracks.
RD/clamp-on FD combo SOLD
braze-on FD still avail. $20 SHIPPED OBO
Campy Chorus 9 speed crankset 52/39in really good condition
(was going to put on my Bianchi build, replaced w a Record set)
170mm length. 9/16 x 20 pedal threads, English aka BSC aka ISO
arms in extremely good condition, excepts a bit of scratches (no pedal rub) next to the logo on the drive side arm.
logo prints in tact, no visible messes otherwise. clean and shiny anodized surface throughout.
rings are not terribly worn, more than half of life seems left.
dark parts on the photos are dirts, may be cleaned up before ship.
SOLD & SHIPPED OUT
Tange Levin NJS threaded HSNEW IN BOX
this is the better version, direct copy of Campy NR headset—with the lettering on the locknuts.
never used or installed, just wrapped in the original box. chrome finish.
English, 1x 24 tpi 1" standard cups (cup ø 30mm, steerer ø 22.2mm)
27.1mm ø crown-race aka JIS. stack height = 37.5mm (in written but my measurement says 38.5mm-ish)
SOLD & SHIPPED OUT
PAYPAL family/gift preferred, unless you insist regular sale transaction.
pm me on any inquiry or offers. multiple order discount, of course.[/strike]
[strike]Campy Victory derailleurs
1 RD, 1 FD clamp-on, 1 FD braze-on.
all in very good condition. no rusty or damaged part except some minimal ride-rubs. tangy springs.
pulleys have no cracks.
RD/clamp-on FD combo SOLD
braze-on FD still avail. $20 SHIPPED OBO
Campy Chorus 9 speed crankset 52/39in really good condition
(was going to put on my Bianchi build, replaced w a Record set)
170mm length. 9/16 x 20 pedal threads, English aka BSC aka ISO
arms in extremely good condition, excepts a bit of scratches (no pedal rub) next to the logo on the drive side arm.
logo prints in tact, no visible messes otherwise. clean and shiny anodized surface throughout.
rings are not terribly worn, more than half of life seems left.
dark parts on the photos are dirts, may be cleaned up before ship.
SOLD & SHIPPED OUT
Tange Levin NJS threaded HSNEW IN BOX
this is the better version, direct copy of Campy NR headset—with the lettering on the locknuts.
never used or installed, just wrapped in the original box. chrome finish.
English, 1x 24 tpi 1" standard cups (cup ø 30mm, steerer ø 22.2mm)
27.1mm ø crown-race aka JIS. stack height = 37.5mm (in written but my measurement says 38.5mm-ish)
SOLD & SHIPPED OUT
PAYPAL family/gift preferred, unless you insist regular sale transaction.
pm me on any inquiry or offers. multiple order discount, of course.[/strike]
Last edited by orangeology; 05-26-15 at 09:25 AM.
05-18-15, 12:55 PM
#2
Wherever I may roam....
Join Date: Oct 2009
Location: Topton Pa
Posts: 1,853
Bikes: A few bikes
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm not very familiar with stack heights. I need something with a low stack height for my Trek. Would this work?
05-18-15, 01:08 PM
#3
incazzare.
If you know the height you need you'll be able to make a more educated guess, but my '83 Trek came with a Levin.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
05-18-15, 01:40 PM
#4
Hump, what hump?
Join Date: Dec 2003
Location: SC midlands
Posts: 1,934
Bikes: See signature
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 227 Times
in
145 Posts
PM sent.
__________________
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports
05-18-15, 04:23 PM
#5
Senior Member
Thread Starter
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
let me actually measure the height tonight, @RobE30 .
getting some discrepancies here and there, the 37.5mm was based on Velomine site description.
stay tuned, please.
05-19-15, 08:40 AM
#6
Senior Member
Thread Starter
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
@RobE30
my caliper says 38.5mm-ish ±. could give/take a bit as it's pre-assemble measurement i guess?
my caliper says 38.5mm-ish ±. could give/take a bit as it's pre-assemble measurement i guess?
05-19-15, 02:27 PM
#7
Senior Member
Thread Starter
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
updated with price reduction for the remainders
05-19-15, 08:13 PM
#8
Member
Join Date: Feb 2015
Location: Maryland
Posts: 38
Bikes: 2014 Diamondback Haanjo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 8 Times
in
2 Posts
I'd be interested in the clamp on FD and the RD. Tried to send PM but I'm still too much of a newbie for that apparently.
05-20-15, 09:06 AM
#10
Senior Member
Thread Starter
Join Date: Aug 2011
Location: NYC+NNJ
Posts: 1,302
Bikes: i don't have a bike. a few frames, forks and some parts. that's all
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 52 Times
in
33 Posts
updated with sold items. the sale has been successful.
only remainder is braze-on FD now.
only remainder is braze-on FD now.
Thread
Thread Starter
Forum
Replies
Last Post
Brewsmith
Classic and Vintage Sales
5
08-02-18 08:23 AM
Brewsmith
Classic and Vintage Sales
6
03-31-18 01:20 PM
Stevensb
Classic and Vintage Sales
1
02-17-15 08:08 PM
