Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Restored my high school bike

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Restored my high school bike

Old 09-18-20, 01:02 PM
  #1  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Restored my high school bike

Hi all,

Been working on my high school bike over the "quarantine" months, a 1985 or so Nishiki Custom Sport, Kawamura frame.
Original to the bike are the calipers, headset and bars. All other vintage parts came from a Schwinn Prelude that I had laying around. Lots of Mother's mag polish to get them where they are.
I'm very happy with how this turned out, rides as well as I remember, such a great frame (last ridden 25 years ago). Glad I decided to finally
resurrect it. Need to sleeve the derailleur cables within the brazed on bottom bracket guides, they're rubbing on the bottom bracket, and tighten some spokes (vintage 105 hubs),
but it came together very well and was well sorted from the first test ride









. I'm hoping to either find a good sub compact crank in the future for not too much money and perhaps change
the rear gearing as well to deal with the hills around here, but that can wait until spring. The paint is still a bit fragile, our humid summer did it no favors in setting up, so I'll let it cure over the winter
and touch up any rash from installing components. These were really great bikes and with a little TLC are perfectly usable today.

Patrick
DownByLaw is offline  
Old 09-18-20, 01:05 PM
  #2  
branko_76 
Senior Member
 
branko_76's Avatar
 
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,745

Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 701 Post(s)
Liked 667 Times in 417 Posts
Awesome restoration !
branko_76 is offline  
Old 09-18-20, 01:09 PM
  #3  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
Very nice. My high school bike was a Nishiki as well but not as nice as this. For a crank, why not run a 110/74 bcd shimano triple as a double? You can either run it as a 110 bcd double (with a low of 34) or as a 110/74 bcd double if you want to go really low. Those are easy to find and relatively cheap. Or just run it as a triple.
bikemig is offline  
Old 09-18-20, 01:21 PM
  #4  
kermie
Full Member
 
kermie's Avatar
 
Join Date: Jul 2016
Location: Denver CO
Posts: 234

Bikes: 2014 Fuji Cross 2.0 LE, 1993 Santana Vision, 1993 Specialized Allez Pro, 1993 Trek 930, 1985 Panasonic DX3000

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 74 Times in 55 Posts
Very nice job!!
kermie is offline  
Old 09-18-20, 02:58 PM
  #5  
sced
South Carolina Ed
 
Join Date: Mar 2007
Location: Greer, SC
Posts: 3,884

Bikes: Holdsworth custom, Macario Pro, Ciocc San Cristobal, Viner Nemo, Cyfac Le Mythique, Giant TCR, Tommasso Mondial, Cyfac Etoile

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 343 Post(s)
Liked 286 Times in 136 Posts
Extra special
sced is offline  
Old 09-18-20, 03:09 PM
  #6  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by bikemig
Very nice. My high school bike was a Nishiki as well but not as nice as this. For a crank, why not run a 110/74 bcd shimano triple as a double? You can either run it as a 110 bcd double (with a low of 34) or as a 110/74 bcd double if you want to go really low. Those are easy to find and relatively cheap. Or just run it as a triple.
Thanks, that's a good idea. Perhaps I'll make it a true triple.

Patrick
DownByLaw is offline  
Old 09-18-20, 03:10 PM
  #7  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by branko_76
Awesome restoration !
Thank you. I found it very satisfying and learned a lot. I might make this a regular endeavor.
DownByLaw is offline  
Likes For DownByLaw:
Old 09-18-20, 03:11 PM
  #8  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by kermie
Very nice job!!
Thanks, it really turned out how I had envisioned.

Patrick
DownByLaw is offline  
Old 09-18-20, 03:11 PM
  #9  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by branko_76
Awesome restoration !
Thanks so much.

Patrick
DownByLaw is offline  
Old 09-18-20, 11:37 PM
  #10  
cv350
Junior Member
 
Join Date: Aug 2020
Posts: 81
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Liked 47 Times in 30 Posts
Wow! Excellent restoration. Kudos for bringing it back, ready to roll. Great backstory and history— thanks for sharing. Brings back memories!
cv350 is offline  
Old 09-18-20, 11:49 PM
  #11  
SurferRosa
señor miembro
 
SurferRosa's Avatar
 
Join Date: Dec 2018
Location: Pac NW
Posts: 8,484

Bikes: '70s - '80s Campagnolo

Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times in 3,183 Posts
You should reroute the rear brake cable in front of the front cable and around the non drive-side of the head tube. Looks like you left enough cable to do so. If you wrapped the bars bottom-up, you could reposition both cables on the bottom of the bars as well. Nice paint job. Looks great.
SurferRosa is offline  
Likes For SurferRosa:
Old 09-19-20, 12:07 AM
  #12  
gaucho777 
Senior Member
 
gaucho777's Avatar
 
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,445

Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin

Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 826 Post(s)
Liked 2,048 Times in 545 Posts
Thanks for sharing. Congrats on getting your old bike back on the road. I restored my old high school race bike and it remains my favorite bike to ride. That restoration brought me to this forum. Wishing you many more happy miles on your Nishiki.
gaucho777 is offline  
Old 09-19-20, 12:32 AM
  #13  
gios
Senior Member
 
gios's Avatar
 
Join Date: Jan 2010
Location: NV
Posts: 600

Bikes: 2021 Litespeed T5 105, 1990 Gios Compact Pro 105

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 167 Post(s)
Liked 325 Times in 182 Posts
Great job.
gios is offline  
Old 09-19-20, 03:40 AM
  #14  
viperocco
Full Member
 
viperocco's Avatar
 
Join Date: Sep 2020
Location: Monroe MI
Posts: 203

Bikes: 05 Fuji Outland Pro, Fuji cape may, Giant simple single, Peugeot Corbier, Miyata 215st

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 49 Times in 28 Posts
Looks outstanding!
viperocco is offline  
Old 09-19-20, 04:43 AM
  #15  
KenNC
Full Member
 
KenNC's Avatar
 
Join Date: Oct 2013
Posts: 416
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Liked 114 Times in 63 Posts
That came out great, I'd be interested in hearing what paint and primer you used, and sanding/polishing between and after coats.
KenNC is offline  
Old 09-19-20, 06:22 AM
  #16  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by SurferRosa
You should reroute the rear brake cable in front of the front cable and around the non drive-side of the head tube. Looks like you left enough cable to do so. If you wrapped the bars bottom-up, you could reposition both cables on the bottom of the bars as well. Nice paint job. Looks great.
Thanks, will do.

Patrick
DownByLaw is offline  
Old 09-19-20, 06:24 AM
  #17  
John E
feros ferio
 
John E's Avatar
 
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,764

Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times in 819 Posts
Very nice! One of my college pals bought a 1971 Nishiki Custom Sport shortly after I bought my Nishiki Semi-Pro. His was a gaspipe boat anchor with steel rims and cranks, but 10 years later, the Custom Sport had morphed into a very desirable machine.

If you can find a 110mm BCD touring double crankset, you can go as small as 34T. Pair that with a 48T outer, and with a 13T high on the freewheel, you would still have a 100-gear-inch top gear. The 14T drop in front would be comparable that of a standard 53-39 road double, which your rear derailleur should be able to handle.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
John E is offline  
Old 09-19-20, 06:29 AM
  #18  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by KenNC
That came out great, I'd be interested in hearing what paint and primer you used, and sanding/polishing between and after coats.
Thanks. The paint and clear is Dupl-iColor, a Honda metallic gray, and Dupli-Color primer. Very light sanding on the base coat, just to remove any overspray. I let the base cure for 3 weeks before clear. After clearing I used McGuires ultimate compound
to smooth it out. The painting was the worst part. I screwed it up the first time and had to strip it down to basically bare metal. Very time consuming. I'm glad I did it, but I might choose to have
it media blasted and powder coated if I do it again. Spraying lacquer is very tricky, especially in less than ideal conditions as it was this summer. Very humid and windy at the worst times.

Patrick
DownByLaw is offline  
Old 09-19-20, 06:31 AM
  #19  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by John E
Very nice! One of my college pals bought a 1971 Nishiki Custom Sport shortly after I bought my Nishiki Semi-Pro. His was a gaspipe boat anchor with steel rims and cranks, but 10 years later, the Custom Sport had morphed into a very desirable machine.

If you can find a 110mm BCD touring double crankset, you can go as small as 34T. Pair that with a 48T outer, and with a 13T high on the freewheel, you would still have a 100-gear-inch top gear. The 14T drop in front would be comparable that of a standard 53-39 road double, which your rear derailleur should be able to handle.
Thanks. It's surprising how light the bike is. I'd say 22-23 pounds. Very comfortable and fast. I will look into the gearing options for sure.

Patrick
DownByLaw is offline  
Old 09-19-20, 08:15 AM
  #20  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,672

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
Looks fantastic. So I see primer, then silver, then the grey?
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  
Old 09-19-20, 08:50 AM
  #21  
DownByLaw
Member
Thread Starter
 
Join Date: May 2009
Posts: 40
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 23 Times in 4 Posts
Originally Posted by Classtime
Looks fantastic. So I see primer, then silver, then the grey?
No, primer/gray metallic base then clear coat.
DownByLaw is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.