Nice Italvega frame in rough shape or just an old gas pipe?
#1
CL Addict
Thread Starter
Join Date: Oct 2007
Location: Evanston, IL
Posts: 1,067
Bikes: '50s Leon Cattrysse - late 50s Raleigh Lenton Sports - 1960/61 Raleigh Lenton Grand Prix - '72 Canadian Tire Company Supercycle - '74 Raleigh International - '83 Nishiki Cresta - '84 Centurion Turbo - '86 v. Herwerden (Chesini) - '87 Specialized Sirr
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 96 Times
in
59 Posts
Nice Italvega frame in rough shape or just an old gas pipe?
I have been hanging on to a nice mid 1960s Campagnolo Record group and am casually looking for a frame to hang it on.
Would this be a decent candidate?
https://www.ebay.com/itm/Italvega-Co....m46890.l49292
Would this be a decent candidate?
https://www.ebay.com/itm/Italvega-Co....m46890.l49292
__________________
#2
Senior Member
Join Date: Jun 2009
Location: Brooklyn, NY
Posts: 512
Bikes: 1970s Coppi/Fiorelli beater, 1973 Raleigh Competition, 1972 Bob Jackson, 1970 Cilo Sprint-X, 1985 Fuji Touring Series IV, 1969 Legnano Roma
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 217 Post(s)
Liked 198 Times
in
129 Posts
Not gas pipe, but I don't think one of Italvega's higher end frames - the triangular Columbus foil decal denoted a "lesser" tubing, I read somewhere.
#3
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
triangle sticker means "tre-tubi" 3 main tubes are Columbus (most likely SL) and the remainder something like Falck. It's not a thoroughbred but definitely above "gaspipe" grade. And the workmanship on these Torresini-built frames is generally very good, too.
Sidebar: a lot of these stickers were in French but the tubing was not metric...just an oddity.
Sidebar: a lot of these stickers were in French but the tubing was not metric...just an oddity.
#4
Senior Member
Join Date: Jan 2016
Posts: 3,452
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 878 Post(s)
Liked 2,296 Times
in
1,283 Posts
It is entry level for the brand , but still a decent bike. The tre tubi frame is nice and should give a nice ride . The higher end models came with Campagnolo forged drop outs and fork tips, yours look to be stamped . The lug work and the fact that it is Columbus tubing makes this more than a “gas pipe” bike.
#5
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
That would be a fun project.
#6
CL Addict
Thread Starter
Join Date: Oct 2007
Location: Evanston, IL
Posts: 1,067
Bikes: '50s Leon Cattrysse - late 50s Raleigh Lenton Sports - 1960/61 Raleigh Lenton Grand Prix - '72 Canadian Tire Company Supercycle - '74 Raleigh International - '83 Nishiki Cresta - '84 Centurion Turbo - '86 v. Herwerden (Chesini) - '87 Specialized Sirr
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 96 Times
in
59 Posts
Any guess of the model and year?
__________________
#7
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
Gran Turismo ca. 1973
chainset Etablissements Peyrard (NERVAR) model 53-65
gear ensemble Campag Gran Turismo
wheel set Gnutti large flange one-piece alloy shell hubs, QR, 36 spoke
FIAMME yellow label rims
Sheffield model 663 pedals
3TTT Tourist stem/bar set
also produced in metallic brown and in green flambouyant
next model up the range: Nuovo Record
-----
Gran Turismo ca. 1973
chainset Etablissements Peyrard (NERVAR) model 53-65
gear ensemble Campag Gran Turismo
wheel set Gnutti large flange one-piece alloy shell hubs, QR, 36 spoke
FIAMME yellow label rims
Sheffield model 663 pedals
3TTT Tourist stem/bar set
also produced in metallic brown and in green flambouyant
next model up the range: Nuovo Record
-----
Last edited by juvela; 03-05-21 at 11:40 AM. Reason: addition
Likes For juvela:
#8
CL Addict
Thread Starter
Join Date: Oct 2007
Location: Evanston, IL
Posts: 1,067
Bikes: '50s Leon Cattrysse - late 50s Raleigh Lenton Sports - 1960/61 Raleigh Lenton Grand Prix - '72 Canadian Tire Company Supercycle - '74 Raleigh International - '83 Nishiki Cresta - '84 Centurion Turbo - '86 v. Herwerden (Chesini) - '87 Specialized Sirr
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 96 Times
in
59 Posts
this.
Excellent! Thank you.
I also found this. You learn something every day.
-----
Gran Turismo ca. 1973
gear ensemble Campag Gran Turismo
wheel set Gnutti large flange one-piece alloy shell hubs, QR, 36 spoke
FIAMME yellow label rims
Sheffield pedals
3TTT stem/bar set
also produced in metallic brown and in green flambouyant
next model up the range: Nuovo Record
-----
Gran Turismo ca. 1973
gear ensemble Campag Gran Turismo
wheel set Gnutti large flange one-piece alloy shell hubs, QR, 36 spoke
FIAMME yellow label rims
Sheffield pedals
3TTT stem/bar set
also produced in metallic brown and in green flambouyant
next model up the range: Nuovo Record
-----
I also found this. You learn something every day.
Models[edit]
Models manufactured under the Italvega marque include (in order of increasing quality):- Viva Sport
- Nuovo Sport
- Nuovo Record
- Super Record
- Super Speciale
- Super Light
__________________
#9
Senior Member
Join Date: Sep 2010
Location: La Habra, California
Posts: 788
Bikes: Italvega Super Speciales and Superlights
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 355 Post(s)
Liked 345 Times
in
174 Posts
triangle sticker means "tre-tubi" 3 main tubes are Columbus (most likely SL) and the remainder something like Falck. It's not a thoroughbred but definitely above "gaspipe" grade. And the workmanship on these Torresini-built frames is generally very good, too.
Sidebar: a lot of these stickers were in French but the tubing was not metric...just an oddity.
Sidebar: a lot of these stickers were in French but the tubing was not metric...just an oddity.
Agree workmanship was pretty good, even on lower models.
This is a 1970-71, maybe early 72 Italvega Gran Turismo model, age mainly be 4 digit serial number AND flat head badge. The Gran Turismo is identified by the Tre-tubing sticker and 3 butted tubes, flat fork crown, stamped fork ends and dropouts without hanger, twin short seat tube chrome bands with chrome stay socks and fork sock. It is equipped with lower level cottered steel cranks, Campagnolo matchbox front derailleur and Valentino rear derailleur, weinmann or universal center pull brakes and usually lower 3TTT or other stem. 2nd or 3rd from bottom. Touring geometry.
the similar Nuovo Record has same tre-Tubing Columbus frame but with better sloping crown fork, Campagnolo rear dropouts but stamped front fork ends. It has same chrome scheme but long tall continuous chrome seat band. Equipped with alloy Stronglight cranks usually, Campagnolo NR derailleur and shifters, used better center pull brakes and stem/bars. A level up. Between touring and racing geometry.
the later twin to the Gran Turismo was the upmarket Gran Rally (see member Kabuki12), tre-tubing frame but with Campagnolo dropouts front and rear, similar but slightly taller twin chrome seat bands and front/rear chrome socks, alloy Cotter-less cranks (Stronglight usually but some with Campagnolo groups), center pull brakes, touring geometry and gearing, eyelets for rack and fender mounts.
Subject bike is decent frame, depends on if fits well and you have parts to complement what is there which is more than a frame only. Also depends on your budget.
__________________
Italvega and Torpado Enthusiast
Italvega and Torpado Enthusiast
#10
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
wrt rear mech -
owned a green example as a personal machine
it came fitted with the Gran Turismo rear mech
every other example of this model have had the opportunity to see came with this mech
if Torresini fitted some with Valentino rear mech perhaps it was something which varied by model year...?
-----
wrt rear mech -
owned a green example as a personal machine
it came fitted with the Gran Turismo rear mech
every other example of this model have had the opportunity to see came with this mech
if Torresini fitted some with Valentino rear mech perhaps it was something which varied by model year...?
-----
Likes For juvela:
#11
CL Addict
Thread Starter
Join Date: Oct 2007
Location: Evanston, IL
Posts: 1,067
Bikes: '50s Leon Cattrysse - late 50s Raleigh Lenton Sports - 1960/61 Raleigh Lenton Grand Prix - '72 Canadian Tire Company Supercycle - '74 Raleigh International - '83 Nishiki Cresta - '84 Centurion Turbo - '86 v. Herwerden (Chesini) - '87 Specialized Sirr
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 96 Times
in
59 Posts
If it stays this low I might go for it. I only need the obvious consumables. I have everything else and it's my size.
__________________
#12
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
frame bits -
fork crown Agrati nr. 005.8048, part of the "AM" lug ensemble
bottom bracket shell Agrati nr. 000.8507, part of the "AM" lug ensemble
dropouts Agrati nr. 000.8002
fork ends Agrati nr. 000.8010
---
water bottle mount likely achieved with rivnuts since paint is original and undisturbed
-----
frame bits -
fork crown Agrati nr. 005.8048, part of the "AM" lug ensemble
bottom bracket shell Agrati nr. 000.8507, part of the "AM" lug ensemble
dropouts Agrati nr. 000.8002
fork ends Agrati nr. 000.8010
---
water bottle mount likely achieved with rivnuts since paint is original and undisturbed
-----
Likes For juvela:
#13
Senior Member
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times
in
518 Posts
There was a bike made by Trek a couple years ago - I think it was a city/hybrid bike, and the frame was made from some alloy of steel that was not necessarily 4130 or 853 or even 501. It was claimed (on BF iirc) that when Trek representatives were asked, they used 'hi tensile' to describe it. I said to a friend at the time, you can make a crappy bike out of nice materials or a nice bike out of cheap materials. The Trek was obviously a nice bike, even without the 'bling' factor of a known tubing sticker.
Some months later I went to look at an old classical guitar, made in Brasil in 1974. It was obviously a nice instrument with clear sound and easy to play. When I looked closer I realized the top, and likely the back and sides, were made with laminate construction instead of the more prestigious (and expensive, and delicate) solid wood construction. I pointed this out to my friend and he sort of tsk tsked me. "remember what you said about bike frame materials? The same goes for anything - You can make a nice guitar out of cheaper materials, or a crappy guitar out of expensive materials."
This guitar is obviously a nice guitar made out of cheaper materials.
Your frame reminded me of that conversation - maybe a snob might turn up their nose at the 'lesser' model from whatever company, but just because it was affordable doesn't mean it isn't good. The nicely scalloped lugs and chrome stays and fork are obvious hallmarks of a frame that they put together with some care, even if it is less expensive.
Epilogue:
The guitar is now my prized possession. IT stays perfectly in tune unless there is a change in temperature, then tension in the unwound strings seems to follow the temperature swings a little more than the wound strings, but always consistent, and with the most perfect intonation of any guitar I have played. It doesn't sound great, but that's because I can't play worth a damn. I suppose the cheap/expensive vs crap/quality equation works for that too - a decent musician could make nice music with a cheap guitar, but a crappy musician doesn't become a good musician because he has an expensive guitar.
Some months later I went to look at an old classical guitar, made in Brasil in 1974. It was obviously a nice instrument with clear sound and easy to play. When I looked closer I realized the top, and likely the back and sides, were made with laminate construction instead of the more prestigious (and expensive, and delicate) solid wood construction. I pointed this out to my friend and he sort of tsk tsked me. "remember what you said about bike frame materials? The same goes for anything - You can make a nice guitar out of cheaper materials, or a crappy guitar out of expensive materials."
This guitar is obviously a nice guitar made out of cheaper materials.
Your frame reminded me of that conversation - maybe a snob might turn up their nose at the 'lesser' model from whatever company, but just because it was affordable doesn't mean it isn't good. The nicely scalloped lugs and chrome stays and fork are obvious hallmarks of a frame that they put together with some care, even if it is less expensive.
Epilogue:
The guitar is now my prized possession. IT stays perfectly in tune unless there is a change in temperature, then tension in the unwound strings seems to follow the temperature swings a little more than the wound strings, but always consistent, and with the most perfect intonation of any guitar I have played. It doesn't sound great, but that's because I can't play worth a damn. I suppose the cheap/expensive vs crap/quality equation works for that too - a decent musician could make nice music with a cheap guitar, but a crappy musician doesn't become a good musician because he has an expensive guitar.
Likes For ClydeClydeson:
#14
Full Member
Join Date: Jun 2020
Location: Marin County, Alta California
Posts: 385
Bikes: Since new: 86 Rodriguez Tandem, wife's 87 Gitane Team Pro, 92 Burley Rock-n-Roll, 85 Fisher Comp, 88 Puch Pro, two 92 Bridgestone X0-1s; later: 66/67 Gitane Champion du Monde, 70 Gitane Super Corsa, 70 Carre, 87 Gitane Team Pro, 77/78 Ritchey Tandem
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 366 Times
in
161 Posts
Stamped dropouts...not a great candidate for that Record group (unlikely a group of this grade would have been fit to at most a mid-grade bike)...I'd keep hunting if your goal is to find an appropriate frame for your Campy components.
Last edited by Markeologist; 03-05-21 at 01:10 PM. Reason: typo
Likes For Markeologist:
#15
Senior Member
Join Date: Jan 2016
Posts: 3,452
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 878 Post(s)
Liked 2,296 Times
in
1,283 Posts
Rear drops on my 1972 Grand Rally
This was quite the project bike. The rust from years of being left outside in a Central California beach town took its toll. I spent a year on this bike and it was worth it. If you like that bike, you should go ahead with it. Make sure there is no terminal damage from a crash or anything. I paid $100 for this one because I figured the early Campagnolo bits were worth that. When I began taking it apart , I kind of fell in love with the fact that it survived! The bearings still had fresh grease and there was no damage to any of the races. Due to the upgrades someone did to the bike I have a suspicion it may have been raced. Zeus competition seat post and Campy just about everywhere. Cranks are Super Record 175 length. See Rusty Resurection on my blog joesvintageroadbikes.wordpress. I might add, there is very little information on the Grand Rally. I think it may have been a transitional model before the Nuevo Record. What I know about this bike I learned from Bartley aka mech986, he has info on the ItalVega brand.
Last edited by Kabuki12; 03-05-21 at 04:12 PM.
Likes For Kabuki12:
#16
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,752 Times
in
939 Posts
This old Torpado is very similar to the OP's bike. Nothing special when compared to higher end bikes and most certainly not gas pipe, nor is the tube set exotic. That said, I have restored quite a few such bikes and I find them to be interesting projects and just fine to ride. This late sixties Torpado arrived looking like this...
$250 to $300 CND turned it into this (I do all of the work myself, including the brushed on paint job). I am waiting for tires before adjusting the fender lines...
Put another way, I think such bikes to be worthy projects and would not pass up the opportunity to build another one. This is the last Torpado, a step above the grey and red one above, and a treat to ride...
$250 to $300 CND turned it into this (I do all of the work myself, including the brushed on paint job). I am waiting for tires before adjusting the fender lines...
Put another way, I think such bikes to be worthy projects and would not pass up the opportunity to build another one. This is the last Torpado, a step above the grey and red one above, and a treat to ride...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
Likes For randyjawa:
#17
Myrtle Beach Crab
Join Date: Nov 2012
Location: Newport RI
Posts: 825
Bikes: enough one would think, but thinking isn't my strong point
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 271 Post(s)
Liked 541 Times
in
214 Posts
i have 2 gran tourismo's with stamped dropouts, one running sunXCD RD with a hanger, and one with campy with a hanger. nice riders and nothing wrong with these frames...
Last edited by cocoabeachcrab; 03-06-21 at 02:02 PM.
Likes For cocoabeachcrab:
Likes For Charles Wahl:
#19
CL Addict
Thread Starter
Join Date: Oct 2007
Location: Evanston, IL
Posts: 1,067
Bikes: '50s Leon Cattrysse - late 50s Raleigh Lenton Sports - 1960/61 Raleigh Lenton Grand Prix - '72 Canadian Tire Company Supercycle - '74 Raleigh International - '83 Nishiki Cresta - '84 Centurion Turbo - '86 v. Herwerden (Chesini) - '87 Specialized Sirr
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 96 Times
in
59 Posts
#20
Senior Member
Join Date: Sep 2010
Location: La Habra, California
Posts: 788
Bikes: Italvega Super Speciales and Superlights
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 355 Post(s)
Liked 345 Times
in
174 Posts
-----
wrt rear mech -
owned a green example as a personal machine
it came fitted with the Gran Turismo rear mech
every other example of this model have had the opportunity to see came with this mech
if Torresini fitted some with Valentino rear mech perhaps it was something which varied by model year...?
-----
wrt rear mech -
owned a green example as a personal machine
it came fitted with the Gran Turismo rear mech
every other example of this model have had the opportunity to see came with this mech
if Torresini fitted some with Valentino rear mech perhaps it was something which varied by model year...?
-----
-----
frame bits -
fork crown Agrati nr. 005.8048, part of the "AM" lug ensemble
bottom bracket shell Agrati nr. 000.8507, part of the "AM" lug ensemble
dropouts Agrati nr. 000.8002
fork ends Agrati nr. 000.8010
---
water bottle mount likely achieved with rivnuts since paint is original and undisturbed
-----
frame bits -
fork crown Agrati nr. 005.8048, part of the "AM" lug ensemble
bottom bracket shell Agrati nr. 000.8507, part of the "AM" lug ensemble
dropouts Agrati nr. 000.8002
fork ends Agrati nr. 000.8010
---
water bottle mount likely achieved with rivnuts since paint is original and undisturbed
-----
This old Torpado is very similar to the OP's bike. Nothing special when compared to higher end bikes and most certainly not gas pipe, nor is the tube set exotic. That said, I have restored quite a few such bikes and I find them to be interesting projects and just fine to ride. This late sixties Torpado arrived looking like this...
$250 to $300 CND turned it into this (I do all of the work myself, including the brushed on paint job). I am waiting for tires before adjusting the fender lines...
Put another way, I think such bikes to be worthy projects and would not pass up the opportunity to build another one. This is the last Torpado, a step above the grey and red one above, and a treat to ride...
$250 to $300 CND turned it into this (I do all of the work myself, including the brushed on paint job). I am waiting for tires before adjusting the fender lines...
Put another way, I think such bikes to be worthy projects and would not pass up the opportunity to build another one. This is the last Torpado, a step above the grey and red one above, and a treat to ride...
Sorry the seller pulled it out from under you and all the bidders.
__________________
Italvega and Torpado Enthusiast
Italvega and Torpado Enthusiast
#21
Full Member
Join Date: Jun 2020
Location: Marin County, Alta California
Posts: 385
Bikes: Since new: 86 Rodriguez Tandem, wife's 87 Gitane Team Pro, 92 Burley Rock-n-Roll, 85 Fisher Comp, 88 Puch Pro, two 92 Bridgestone X0-1s; later: 66/67 Gitane Champion du Monde, 70 Gitane Super Corsa, 70 Carre, 87 Gitane Team Pro, 77/78 Ritchey Tandem
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 366 Times
in
161 Posts
It is specifically asked if this frame is a good candidate for a vintage Campy Record group. I assume that the goal is to match this group with a frame of similar high end quality. I am making an assumption here but since a frame of similar age is being looked at, that is probably a safe assumption. No matter how many low to midgrade bikes somebody has THIS frame is not a good candidate to pair with THAT group.