Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Where are you? What time is it? Am I bent?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Where are you? What time is it? Am I bent?

Old 01-23-20, 10:33 AM
  #1  
jonwvara 
Senior Member
Thread Starter
 
jonwvara's Avatar
 
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,046

Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 368 Post(s)
Liked 46 Times in 35 Posts
Where are you? What time is it? Am I bent?

I'm overhauling an old (mid-80s, Japanese-made) Bianchi Randonneur that I picked up a year or two ago for a friend who is planning a cross-country tour. It has some miles on it but seems to be in pretty good shape.

A previous owner took an electric engraving tool to the handlebars and inscribed "Where are you?" to the left of the stem and "What time is it?" to the right. (My father once borrowed such a tool from the local police department and inscribed his social security number on everything moveable in the house as a burglar-deterring measure. This would have been in the mid-70s, I guess, before the invention of identity theft.)

Maybe those were meant to be Zen koans, the contemplation of which would while away tedious miles while on a tour. It did occur to me that engraving the bars in that way might not be a great idea in terms of stress risers, etc., but because it was part of the history of the bike I was tempted to leave the bars in place.

Until I looked at them more closely. They seem to be slightly (and slightly unevenly) bent downward--maybe bent slightly toward the front as well.

What gives? It's too symmetrical to be crash damage. Can something like that happen over time just from hand pressure? It seems unlikely to me. In any case, I will be replacing the bars. The SR stem, on the other hand, seems fine.


__________________
www.redclovercomponents.com

"Progress might have been all right once, but it has gone on too long."
--Ogden Nash

Last edited by jonwvara; 01-23-20 at 10:38 AM.
jonwvara is offline  
Old 01-23-20, 11:32 AM
  #2  
Spaghetti Legs 
Senior Member
 
Join Date: Dec 2014
Location: Central Virginia
Posts: 3,626

Bikes: Numerous

Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 997 Post(s)
Likes: 0
Liked 218 Times in 125 Posts
That’s weird. Randonneur bars tend to flare upwards a bit so that the drop are wider than the tops. The bend looks asymmetric to me. I have a set of Cinelli 64-40’s that are bent upward from the middle sleeve on one side and I have applied all kinds of brutal force to straighten it without a budge.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '85 Moser, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘85 Pinarello Record
Spaghetti Legs is offline  
Old 01-23-20, 12:17 PM
  #3  
Drillium Dude 
NNNN
 
Drillium Dude's Avatar
 
Join Date: Jul 2009
Location: Bothell, WA
Posts: 10,065

Bikes: 1973 Colnago Super, 1973 Colnago Super concept, 1979 Medici Pro Strada, 1979 Dennis Sparrow, 1980 Alpina, 1981 Bianchi Super Leggera, 1983 Colnago Mexico, 1985 Casati Perfection, 1985 Somec Super Corsa, 2002 Bill Davidson custom

Mentioned: 184 Post(s)
Tagged: 0 Thread(s)
Quoted: 1426 Post(s)
Liked 524 Times in 301 Posts
Unevenly applied tape, lines in the background from the floorboards, and lack of full bar/stem photo makes it somewhat difficult (for me anyway) to make out what's going on in the photos. They seem bent, but I can't authoritatively comment because the composition is messing with my eyes!

DD
__________________
My Flickr pics: http://www.flickr.com/photos/30331021@N08/

Drillium Dude is offline  
Old 01-23-20, 12:22 PM
  #4  
3speedslow
Senior Member
 
3speedslow's Avatar
 
Join Date: Oct 2010
Location: Jacksonville, NC
Posts: 7,775

Bikes: A few

Mentioned: 105 Post(s)
Tagged: 0 Thread(s)
Quoted: 1402 Post(s)
Liked 185 Times in 142 Posts
Usually it’s the French bars being accused of being bent.
3speedslow is offline  
Likes For 3speedslow:
Old 01-23-20, 07:40 PM
  #5  
droppedandlost 
small ring
 
droppedandlost's Avatar
 
Join Date: Jul 2012
Location: SKC, PNW
Posts: 387

Bikes: yup

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 55 Times in 36 Posts
__________________
droppedandlost is offline  
Likes For droppedandlost:
Old 01-23-20, 08:05 PM
  #6  
canklecat
Me duelen las nalgas
 
canklecat's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 10,558

Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel

Mentioned: 179 Post(s)
Tagged: 0 Thread(s)
Quoted: 3344 Post(s)
Liked 720 Times in 494 Posts
Sounds like something a local cycling friend would use as a hashtag on his Strava logs. Most of his Strava and Facebook posts sound like Zen koans composed under the influence of mushrooms. And may very well be.
canklecat is online now  
Old 01-23-20, 08:16 PM
  #7  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 12,850

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 543 Post(s)
Liked 273 Times in 145 Posts
I like the two questions engraved on the bars. Gives a glimpse into the life of a cross country road rider. No sense of time, out in the middle of nowheresville. Cool stuff.
OldsCOOL is offline  
Old 01-23-20, 08:17 PM
  #8  
SJX426 
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 6,610

Bikes: '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '90 De Rosa Professional, '91 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 560 Post(s)
Liked 85 Times in 64 Posts
Vice and 2x4 works well for bending all kinds of steel and AL. I created a splayed handlebar for a mtb project that worked well.
P1030009, on Flickr
First time I showed this, someone asked "you can bend aluminum?" Duh yeah! how do you think they were shaped to begin with? Just like a steel fork.
__________________
Bikes don't stand alone. They are two tired.
SJX426 is offline  
Old 01-23-20, 08:53 PM
  #9  
francophile 
PM me your cotters
 
francophile's Avatar
 
Join Date: Jun 2015
Location: ATL
Posts: 2,898
Mentioned: 60 Post(s)
Tagged: 0 Thread(s)
Quoted: 779 Post(s)
Liked 205 Times in 157 Posts
I'll be interested to see if you find more questions under the tape. Like, "what's that ringing sound?" and "why does my ass hurt?"

That said, some rando bars have that much shape to them. Pulled the wildest pair I've ever seen off a L. Bobet I acquired several years ago. But those were chromed steel, if memory serves.

That said, lots going on with that picture, not limited to the badly wrapped bar tape. Between it appearing to wrap the wrong direction on one side, the other lines in the background from the floor, and the off-center angle of the shot, it's hard to say. I'd love to see a head-on photo with a straight edge across the top and a grid behind it.

Park's frame/form straightening tool is great for free-bending bars into various shapes. But then again, depending on where you need to bend, cheater bars of various diameters work too ....
francophile is offline  
Likes For francophile:
Old 01-23-20, 09:28 PM
  #10  
jonwvara 
Senior Member
Thread Starter
 
jonwvara's Avatar
 
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,046

Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 368 Post(s)
Liked 46 Times in 35 Posts
Originally Posted by Drillium Dude View Post
Unevenly applied tape, lines in the background from the floorboards, and lack of full bar/stem photo makes it somewhat difficult (for me anyway) to make out what's going on in the photos. They seem bent, but I can't authoritatively comment because the composition is messing with my eyes!

DD
Originally Posted by francophile View Post
I'll be interested to see if you find more questions under the tape. Like, "what's that ringing sound?" and "why does my ass hurt?"

That said, some rando bars have that much shape to them. Pulled the wildest pair I've ever seen off a L. Bobet I acquired several years ago. But those were chromed steel, if memory serves.

That said, lots going on with that picture, not limited to the badly wrapped bar tape. Between it appearing to wrap the wrong direction on one side, the other lines in the background from the floor, and the off-center angle of the shot, it's hard to say. I'd love to see a head-on photo with a straight edge across the top and a grid behind it.

Park's frame/form straightening tool is great for free-bending bars into various shapes. But then again, depending on where you need to bend, cheater bars of various diameters work too ....
I am rightly chastised for a bad photo. I will post another when I have a chance, minus the bar tape and with a straight edge and grid backdrop as proposed above.
__________________
www.redclovercomponents.com

"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
jonwvara is offline  
Likes For jonwvara:
Old 01-23-20, 09:37 PM
  #11  
Reynolds 
Passista
 
Reynolds's Avatar
 
Join Date: Jul 2005
Posts: 6,765

Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 102 Times in 71 Posts
Looks like it was bent on purpose by the PO, and not too well at that. The engraving doesn' look good either.
Reynolds is offline  
Old 01-24-20, 12:30 AM
  #12  
Drillium Dude 
NNNN
 
Drillium Dude's Avatar
 
Join Date: Jul 2009
Location: Bothell, WA
Posts: 10,065

Bikes: 1973 Colnago Super, 1973 Colnago Super concept, 1979 Medici Pro Strada, 1979 Dennis Sparrow, 1980 Alpina, 1981 Bianchi Super Leggera, 1983 Colnago Mexico, 1985 Casati Perfection, 1985 Somec Super Corsa, 2002 Bill Davidson custom

Mentioned: 184 Post(s)
Tagged: 0 Thread(s)
Quoted: 1426 Post(s)
Liked 524 Times in 301 Posts
Originally Posted by jonwvara View Post
I am rightly chastised for a bad photo. I will post another when I have a chance, minus the bar tape and with a straight edge and grid backdrop as proposed above.
Aw, man - I'm sorry if it sounded as if I were chastising you. I really did simply mean that the perspectives really messed with my ability to discern accurately what was going on

DD
__________________
My Flickr pics: http://www.flickr.com/photos/30331021@N08/

Drillium Dude is offline  
Old 01-24-20, 01:07 AM
  #13  
downtube42
Senior Member
 
downtube42's Avatar
 
Join Date: Oct 2008
Location: Portland, OR
Posts: 2,093

Bikes: Volae Team, '83 Bianchi Nuovo Racing v2,'74ish Windsor Carrera Sport, Priority Eight, Nimbus MUni, Trek Roscoe 6

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 127 Post(s)
Liked 146 Times in 86 Posts
I wonder if the engraver was a randonneur who rode grand brevets. When your mind is gone from sleep deprivation, it's good to have a reminder of the two most important things. The world shrinks down to time and location. Food and water come into play, but those are just a means to the end: time and distance.

I can't decide if they are bent from the pics. If they truly are, I guess I'd sadly replace them. The patina is grand.
downtube42 is offline  
Likes For downtube42:
Old 01-24-20, 06:15 AM
  #14  
jonwvara 
Senior Member
Thread Starter
 
jonwvara's Avatar
 
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,046

Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 368 Post(s)
Liked 46 Times in 35 Posts
Originally Posted by Drillium Dude View Post
Aw, man - I'm sorry if it sounded as if I were chastising you. I really did simply mean that the perspectives really messed with my ability to discern accurately what was going on

DD
No offense taken! Not sure why I used "chastised." I was showing off, I guess. I just snapped a quick couple of photos without thinking much about it, and didn't really look at them before posting. Now that I have looked at them, it's hard to imagine how I could have done a worse job in terms or introducing optical-illusion inducing externalities. Oops.
__________________
www.redclovercomponents.com

"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
jonwvara is offline  
Likes For jonwvara:
Old 01-24-20, 06:32 AM
  #15  
jonwvara 
Senior Member
Thread Starter
 
jonwvara's Avatar
 
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,046

Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 368 Post(s)
Liked 46 Times in 35 Posts
Originally Posted by downtube42 View Post
I wonder if the engraver was a randonneur who rode grand brevets. When your mind is gone from sleep deprivation, it's good to have a reminder of the two most important things. The world shrinks down to time and location. Food and water come into play, but those are just a means to the end: time and distance.

I can't decide if they are bent from the pics. If they truly are, I guess I'd sadly replace them. The patina is grand.
Well, it is the "Randonneur" model....

I like that hypothesis so much that that I am going to accept it as settled fact. These bars are going on the museum wall of my shop, along with my prototype triplizers, the mangled frame I was riding when I t-boned a large bulldog on a high-speed descent, and the nice Holdsworth Mistral frame that I bought for a song before discovering that it had a slight kink in the down tube.

It could also be that the engraving was done in the immediate aftermath of a ride--that would explain why the writing is so shaky. Maybe even during a ride, with a battery-powered tool.
__________________
www.redclovercomponents.com

"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
jonwvara is offline  
Old 01-24-20, 06:43 AM
  #16  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: City of Lakes
Posts: 1,870

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 454 Post(s)
Liked 118 Times in 83 Posts
Originally Posted by Drillium Dude View Post
I really did simply mean that the perspectives really messed with my ability to discern accurately what was going on
DD
Heh. Welcome to my world.
__________________
"If we don't change direction soon, we'll end up where we're going." -Irwin Corey
Hudson308 is offline  
Old 01-24-20, 06:57 AM
  #17  
Salamandrine 
Senior Member
 
Join Date: Oct 2015
Location: Los Angeles
Posts: 5,446

Bikes: 78 Masi Criterium, 68 PX10, 2016 Mercian King of Mercia, Rivendell Clem Smith Jr

Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 1962 Post(s)
Liked 183 Times in 142 Posts
Originally Posted by jonwvara View Post
What gives? It's too symmetrical to be crash damage. Can something like that happen over time just from hand pressure?
Yes. I happens.
It's probably not so much constant pressure. More likely it was a heavy rider and rough roads and potholes. Usually I've seem this with French bike boom era bikes. (as others have mentioned)

That bar may be a cheap replacement from a junk bin. I vaguely recall Bianchi randonneur bikes having bars with an engraved crest, but it's been a long long time, and that could be wrong.

Despite the name, I've never heard of anyone riding brevets in the 80s, at least in the US. Centuries, yeah.

Last edited by Salamandrine; 01-24-20 at 07:01 AM.
Salamandrine is offline  
Old 01-24-20, 08:50 AM
  #18  
Trakhak
Senior Member
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 1,859
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 449 Post(s)
Liked 82 Times in 58 Posts
Used to see bars bent exactly like that back when I worked in bike stores in the '70s. Always cheap aluminum bars drawn in an unvarying small diameter.

If you ever wondered what phenomenon prompted the development of bulge-formed or sleeved, larger-diameter handlebars, you're looking at it.

Last edited by Trakhak; 01-24-20 at 08:55 AM.
Trakhak is offline  
Old 01-24-20, 03:45 PM
  #19  
jonwvara 
Senior Member
Thread Starter
 
jonwvara's Avatar
 
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,046

Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 368 Post(s)
Liked 46 Times in 35 Posts
Here are a couple of additional photos. Ruling out a grid on a piece of cardboard was mildly satisfying, but I think we're still left with, "yeah, those look like they might possibly be bent a little bit, maybe. Or not? Hard to say."

I'm going to call them wall hangers and move on. Nice Weinmann levers, though.

__________________
www.redclovercomponents.com

"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
jonwvara is offline  
Old 01-24-20, 05:04 PM
  #20  
desconhecido 
Senior Member
 
Join Date: Mar 2010
Posts: 1,659
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 342 Post(s)
Liked 53 Times in 45 Posts
That's an impressive shape. Heat could help do that. Maybe he rode to Hell and back.
As long as I'm making silly jokes: "Nice Weinmann levers." A phrase I don't often hear.
desconhecido is offline  
Old 01-24-20, 05:27 PM
  #21  
xiaoman1 
Senior Member
 
xiaoman1's Avatar
 
Join Date: Mar 2014
Location: Weird Coast City of the Angeles
Posts: 2,597

Bikes: Paramounts, PX-10s, Mondias, Motobecane Grand Record, Specialized Allez Carbon, and Nishiki Tri-A

Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 479 Post(s)
Likes: 0
Liked 183 Times in 132 Posts
It still appears to be bent
xiaoman1 is offline  
Old 01-24-20, 05:52 PM
  #22  
RobbieTunes 
Half drunk? Finish!
 
RobbieTunes's Avatar
 
Join Date: Dec 2007
Location: Very Southern Indiana
Posts: 26,976
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 374 Post(s)
Liked 777 Times in 502 Posts
Does anybody really know what time it is?
__________________
Robbie ♪♫♪...☻
I have unfinished business.

RobbieTunes is offline  
Likes For RobbieTunes:
Old 01-24-20, 05:55 PM
  #23  
Salamandrine 
Senior Member
 
Join Date: Oct 2015
Location: Los Angeles
Posts: 5,446

Bikes: 78 Masi Criterium, 68 PX10, 2016 Mercian King of Mercia, Rivendell Clem Smith Jr

Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 1962 Post(s)
Liked 183 Times in 142 Posts
With the picture and grid, it looks a little too even to be unintentional. Those are usually more irregular. Looks like someone bent the drops of a rando bar down until they were parallel, and ended up with a weird and slightly irregular track bar.
Salamandrine is offline  
Old 01-24-20, 06:19 PM
  #24  
Cougrrcj 
Over forty victim of Fate
 
Cougrrcj's Avatar
 
Join Date: Jul 2011
Location: NE Ohio
Posts: 3,222

Bikes: A few...

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 352 Post(s)
Liked 81 Times in 52 Posts
Originally Posted by RobbieTunes View Post
Does anybody really know what time it is?
Does anybody really care?
__________________
'75 Fuji S-10S bought new, 52k+ miles and still going!
'84 Univega Gran Tourismo
'84 Univega Viva Sport
'86 Miyata 710
'90 Schwinn Woodlands
Huffy MTB - for trips to corner store
Unknown brand MTB of questionable lineage aka 'Mutt Trail Bike'
Plus or minus a few others from time-to-time
Cougrrcj is offline  
Likes For Cougrrcj:
Old 01-24-20, 08:03 PM
  #25  
unworthy1
Stop reading my posts!
 
unworthy1's Avatar
 
Join Date: Sep 2004
Posts: 10,464
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 421 Post(s)
Liked 84 Times in 69 Posts
looks to me like a 'track/pista bend' and soft alloy bars where one side got shoved forward so the bar ends aren't on the same line. Not the kind of bend you want for touring/radonneur because of limited hand positions IMO
unworthy1 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.