Vintage Shimano 105 1050 group derailleur cables
#1
Junior Member
Thread Starter
Vintage Shimano 105 1050 group derailleur cables
I have a 1987 Cannondale SR 500 with the old 1050 Simano 105 Groupset. I need to replace the rear derailleur cable as it is fraying and will break soon. What cable do I need to buy and where can I get it? Thanks!!!
#2
Senior Member
Join Date: Jul 2014
Posts: 1,490
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1083 Post(s)
Liked 687 Times
in
441 Posts
You might consider replacing all the cables on the bike at the same time, and also the cable housing, if it's all original to the bike (36 years old). Jagwire is the way to go.
Likes For Jeff Neese:
#3
Junior Member
Thread Starter
These should be the ones. Jagwire Slick Stainless Steel Shift/Shifter Cables Set
You might consider replacing all the cables on the bike at the same time, and also the cable housing, if it's all original to the bike (36 years old). Jagwire is the way to go.
You might consider replacing all the cables on the bike at the same time, and also the cable housing, if it's all original to the bike (36 years old). Jagwire is the way to go.
#4
Senior Member
Join Date: Mar 2012
Posts: 982
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 506 Post(s)
Likes: 0
Liked 639 Times
in
357 Posts
These should be the ones. Jagwire Slick Stainless Steel Shift/Shifter Cables Set
#5
Junior Member
Thread Starter
It sat for a few decades then i resurrected it and ride almost every day now, but thanks for the comments! Yes, I need a new bike just for the gearing. Lol.