New cassette worn down after only 400 miles of road use
#1
Newbie
Thread Starter
Join Date: Feb 2019
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
New cassette worn down after only 400 miles of road use
I have a mid-level name-brand 11-speed carbon-fibre road bike with a Shimano 105 cassette, KMC chain, and Praxis crank. I bought the bike new from an authorized dealer 3 months ago and have put around 400 miles on it, almost entirely on paved New Jersey (read: non-mountainous) roads in good weather. I keep my bike clean and well-lubricated. I'm not a racer.
My LBS discovered that the three smallest cogs of the cassette are badly worn away, to the point that the cassette already needs to be replaced. The other cogs are like new.
The LBS says I must be using those three smallest cogs "too much," whatever that means. I'm not a particularly strong rider, so I can't imagine that I'm riding in the highest gears all that often, particularly not when I'm powering up hills and putting the most pressure on the cassette. And no, I don't cross-chain.
How can three cogs of a nearly brand-new, name-brand, factory-installed cassette be shot after only 400 miles? Does that really happen? Or could there be something wrong with the frame or another component that might have caused the cassette to degrade so quickly? I tried asking these questions to the bike manufacturer, but they told me it's really not their problem.
My LBS discovered that the three smallest cogs of the cassette are badly worn away, to the point that the cassette already needs to be replaced. The other cogs are like new.
The LBS says I must be using those three smallest cogs "too much," whatever that means. I'm not a particularly strong rider, so I can't imagine that I'm riding in the highest gears all that often, particularly not when I'm powering up hills and putting the most pressure on the cassette. And no, I don't cross-chain.
How can three cogs of a nearly brand-new, name-brand, factory-installed cassette be shot after only 400 miles? Does that really happen? Or could there be something wrong with the frame or another component that might have caused the cassette to degrade so quickly? I tried asking these questions to the bike manufacturer, but they told me it's really not their problem.
#2
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,704
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 851 Post(s)
Liked 1,083 Times
in
755 Posts
Only 400 miles on a 105 cassette and as you claim well lubricated and not hard use would tell me something is very wrong. As far as using cogs too much I do big ring-small cog cross chaining frequently which would cause more wear and still get around 12k miles out of a 105 10sp cassette. I'm wondering if a used cassette was on there when you bought it. Could also be a freak factory defect from Shimano. Also do a google search for "105 11sp cassette defects" or "excessive wear" etc. and see if this is a common problem with other riders.
#3
Full Member
Join Date: Nov 2016
Location: SoCal
Posts: 489
Bikes: 2014 Bruce Gordon Rock&Road, 1995 Santana Visa Tandem, 1990 Trek 520, 2012 Surly LHT
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Likes: 0
Liked 43 Times
in
35 Posts
It is really hard to tell visually when a cassette is worn; there is a lot of shaping of the cogs that can be interpreted as wear when in fact they are manufactured that way to facilitate quick shifting. Before you do anything, have them disassemble the cassette and then lay the individual 3 smallest "worn" cogs next to "new" identical cogs. Bet they look the same.
If there is no shifting issue when riding, then I would go to another store and get their opinion. Better yet, find a rider you trust (and that has no financial reason to sell you something) and have them look at the cassette and ride the bike.
Likes For Eggman84:
#4
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Then get them to change the cassette under warranty.
Then find a different shop.
-Tim-
Likes For TimothyH:
#5
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
+1 to all of the above. I get 6000 -7000 miles on a 105 cassette and chain, all in a hilly area, and I use the 16T cog a LOT. Even at that distance the shifting is still fine when I replace them. I don't think Superman could wear out a cassette in 400 miles. As Tim said, you need a different shop.
#6
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,004
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4343 Post(s)
Liked 3,004 Times
in
1,629 Posts
1. Maybe it's not really worn out and the LBS is wrong. Probability 99%
2. Maybe the LBS put a used cassette on your new bike. Probability 1%
3. Maybe something is wrong with your new chain that caused premature wear. Probability <1%
4. Maybe it was a defective cassette that was doomed to fail regardless of your use. Probability <1%
Likes For DiabloScott:
#7
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,955
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4845 Post(s)
Liked 3,973 Times
in
2,580 Posts
Is your LBS the authorized dealer you bought the bike from? If not, that sounds like either they're pulling a fast one on you or simple incompetence. If they are one and the same, I'd raise the warrantee issue. Yes, those cogs are wear parts. But what they are telling you doens't happen that fast unless you really work at it.
Ben
Ben
#9
Newbie
Odd. Why was the bike in the shop at all with such low miles on it? I trust no bad jamming of the chain at any point. Double check for any recalls on the bike or the mech. Can you post a pic of the supposedly worn cogs?
Many LBS are outstanding but our LBS is sadly known for upselling as much as they possibly can
Many LBS are outstanding but our LBS is sadly known for upselling as much as they possibly can
#10
Senior Member
Come on, now somebody say, "You should have ridden it more before getting your free check-up."
#11
Newbie
No the "complimentary check up" is not done here. Can't imagine anyone I know taking the time to bring their bike in if there was nothing wrong with it either.
Come on, now say, "It's impossible for an LBS to use complimentary check ups to sell and upsell things you don't need..."
So why be snotty instead of posting the photo that would allow people to answer the question you posted?
Come on, now say, "It's impossible for an LBS to use complimentary check ups to sell and upsell things you don't need..."
So why be snotty instead of posting the photo that would allow people to answer the question you posted?
#12
Senior Member
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702
Bikes: old clunker
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times
in
83 Posts
It's premature of you to advocate that without knowing the terms of the assumed free check-up.
#13
Senior Member
I suppose just to pile on, but I've got 4k miles on a 105 cassette and.....it's fine. Most people honestly never really wear them out.
#14
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,004
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4343 Post(s)
Liked 3,004 Times
in
1,629 Posts
I hypothesize it was one guy, very low on the experience spectrum, who didn't know what he was looking at... and hopefully not a problem with the LBS as a business.
#15
Senior Member
Presuming you have a name brand bike, warranty service can be had from any dealer who handles that brand. Stores and the home office are real used to the idea that Customer X had a bad experience with Dealer Y. Bike is still under warranty.
#16
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,111
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6262 Post(s)
Liked 4,861 Times
in
3,350 Posts
What problems made you take it to the LBS?
400 miles is in the ball park for when I'd expect to have to adjust the front and back derailleurs on a new bike or new groupset. And for the LBS's around me, a free tune-up of the DR's and functional check of the bike as a whole is what's expected and offered by them when you buy a new bike from them.
400 miles is in the ball park for when I'd expect to have to adjust the front and back derailleurs on a new bike or new groupset. And for the LBS's around me, a free tune-up of the DR's and functional check of the bike as a whole is what's expected and offered by them when you buy a new bike from them.
#17
Newbie
Thread Starter
Join Date: Feb 2019
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
OP here. Everybody take a deep breath, please.
To answer the question of why such a new bike would be in the shop, this was actually the second time I brought the bike in. The first time was for the 10-hour adjustment that the shop I bought the bike from recommends (and provides free of charge) to index the gears if any cable-stretching has happened and to make sure everything is honkey dorey. This time I brought the bike in because it had developed a creaking noise, and the cassette problem was an incidental finding that appears to be unrelated to the creaking because the creaking is timed to the pedal stroke and happens when going uphill and on the large cogs, not the small ones. (Let's leave the creaking issue for another thread, though. We're slowly working through the causes by process of elimination.)
After much back-and-forth, the LBS owner was able to convince Shimano to replace the cassette free of charge, but that offer came with a warning that "next time" it won't be covered. The LBS also replaced the chain, proactively, and without charge. The bike manufacturer was entirely and utterly useless, providing absolutely no support or help and totally disavowing any responsibility for their product, as if I had bought a bag of parts instead of an actual bike. (While the manufacturer has totally let me down, I have to say that the LBS seems to be acting in my best interest and is standing behind the product they sold me.)
Here are a few picture of what I'm told is the worn cassette. (EDIT: I'm told I can't post pictures because I don't have enough points, whatever that means. Oh well. Maybe this will work: The pictures of the cassette are at imgur.com/mQIMju9, imgur.com/bivMgRD, and imgur.com/bzKDXC5 .)
The bike still makes noise. That's next -- and not for this thread.
To answer the question of why such a new bike would be in the shop, this was actually the second time I brought the bike in. The first time was for the 10-hour adjustment that the shop I bought the bike from recommends (and provides free of charge) to index the gears if any cable-stretching has happened and to make sure everything is honkey dorey. This time I brought the bike in because it had developed a creaking noise, and the cassette problem was an incidental finding that appears to be unrelated to the creaking because the creaking is timed to the pedal stroke and happens when going uphill and on the large cogs, not the small ones. (Let's leave the creaking issue for another thread, though. We're slowly working through the causes by process of elimination.)
After much back-and-forth, the LBS owner was able to convince Shimano to replace the cassette free of charge, but that offer came with a warning that "next time" it won't be covered. The LBS also replaced the chain, proactively, and without charge. The bike manufacturer was entirely and utterly useless, providing absolutely no support or help and totally disavowing any responsibility for their product, as if I had bought a bag of parts instead of an actual bike. (While the manufacturer has totally let me down, I have to say that the LBS seems to be acting in my best interest and is standing behind the product they sold me.)
Here are a few picture of what I'm told is the worn cassette. (EDIT: I'm told I can't post pictures because I don't have enough points, whatever that means. Oh well. Maybe this will work: The pictures of the cassette are at imgur.com/mQIMju9, imgur.com/bivMgRD, and imgur.com/bzKDXC5 .)
The bike still makes noise. That's next -- and not for this thread.
#18
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,111
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6262 Post(s)
Liked 4,861 Times
in
3,350 Posts
New Shimano CS5800
New Shimano CS 5800
Not sure that I see any wear. The pics above are my new spare that I just pulled out of the box. All I see in your pics is the normal profiling and shaping of the teeth which is alarming to those that don't realize how drastic Shimano and others get with individually profiling almost every tooth.
However the finish quality of the sprockets doesn't quite look like shimano. Are you certain that's a shimano cassette in your pics?
Last edited by Iride01; 06-05-19 at 04:14 PM.
#19
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,111
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6262 Post(s)
Liked 4,861 Times
in
3,350 Posts
Here are your pics.............
#20
Non omnino gravis
I also don't think it's possible to wear out a cassette in 400 miles, even if you were actively trying to do so. Cassette looks fine to me. And the real thing here is, if the cassette were indeed worn, the chain would be absolutely shot. If the bike shop didn't recommend replacing both, they're just trying to make a quick sale for no reason. Maybe they have a take-off 5800 cassette in the back that they'll try to put on your bike for retail.
Beyond all that, when I pull a cassette because it's noticeably worn (that is, shifting has begun to suffer,) the 11, 12, and 13 are usually in pretty good shape, because they don't get used nearly as often as the 5 cogs in the middle.
Beyond all that, when I pull a cassette because it's noticeably worn (that is, shifting has begun to suffer,) the 11, 12, and 13 are usually in pretty good shape, because they don't get used nearly as often as the 5 cogs in the middle.
#21
Newbie
Thread Starter
Join Date: Feb 2019
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
However the finish quality of the sprockets doesn't quite look like shimano. Are you certain that's a shimano cassette in your pics?
Maybe they have a take-off 5800 cassette in the back that they'll try to put on your bike for retail.
I don't have much experience looking closely at cassettes, so I can't tell how worn the old one was. But the LBS owner and his mechanics are all very experienced, and if they tell me the inner cogs are shot, I have to believe them. Since they're sending the cassette back to Shimano for inspection, they're obviously quite certain about it.
Beyond all that, when I pull a cassette because it's noticeably worn (that is, shifting has begun to suffer,) the 11, 12, and 13 are usually in pretty good shape, because they don't get used nearly as often as the 5 cogs in the middle.
#22
Full Member
Join Date: Apr 2019
Location: Northern NJ
Posts: 419
Bikes: 1987 Pinarello Montello, 1996 Litespeed Classic, 1996 Colnago Master Light, 1997 Litespeed Ultimate, 2006 Opera Leonardo FP, 2006 Pinarello Paris FP, 1984 Pinarello Record, 89-ish Cornelo Profilo
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 148 Post(s)
Liked 119 Times
in
73 Posts
A bad NJ LBS? I'm shocked. Okay, not really. I had a Pinarello dealer cut down a fork for me only they didn't seat it correctly in the frame. I had a colnago dealer tell me how badly my bike needed a tune up by a professional and give it back to me with the brakes so badly aligned they were squealing like a stuck pig. I've found that I'm better off buying whatever Park tool I need and just doing it myself.
Then there's the local shop I had rebuild a wheel for me. I told them I wanted back the zipp hub that came off it. They lost it instead.
Then there's the local shop I had rebuild a wheel for me. I told them I wanted back the zipp hub that came off it. They lost it instead.
#23
Senior Member
I did not read all the posts, however was a new chain installed with the original cassette and tested for skipping?
Had a customer back in 1999 that bought a new Rockhopper from us to commute with. He used the bottom 3 gears. Period, never shifted to lower gears. Within 500 miles he wore them out, hooked and ugly. Smallest cogs wear the quickest, and if used the majority of the time, it will show, but I never take a cog checker or mechanic's eye for fact, I throw a new chain on and try to get those little guys to skip. If they don't then why are they judged as worn out?
Had a customer back in 1999 that bought a new Rockhopper from us to commute with. He used the bottom 3 gears. Period, never shifted to lower gears. Within 500 miles he wore them out, hooked and ugly. Smallest cogs wear the quickest, and if used the majority of the time, it will show, but I never take a cog checker or mechanic's eye for fact, I throw a new chain on and try to get those little guys to skip. If they don't then why are they judged as worn out?
#24
Senior Member
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702
Bikes: old clunker
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times
in
83 Posts
...And that's what's so strange here. The mechanic was certain that I was riding only on the smallest cogs because those are the only ones that appeared worn to him. I know I don't do that. While it makes no sense that any cogs would wear out so quickly, it makes particularly no sense that it would be the smallest cogs. That's why I posted the question, to see if anyone has a theory how this could have happened. The bottom line is that it did happen, and I'm trying to get a handle on why.
#25
Non omnino gravis
No, I mean a take-off: someone bought a bike and had the cassette swapped, so they would put that on your bike as "new," even if it had a handful of miles on it.
If you have a new chain, or just a few links taken off of a shortened chain, you can wrap them around those cogs and find out if they are genuinely worn. If they are, the chain won't want to engage the teeth, or the chain won't sit all the way down to the bottom of the teeth. If the links slide right on, the cogs are fine.
If you have a new chain, or just a few links taken off of a shortened chain, you can wrap them around those cogs and find out if they are genuinely worn. If they are, the chain won't want to engage the teeth, or the chain won't sit all the way down to the bottom of the teeth. If the links slide right on, the cogs are fine.