Pay it forward...
#1376
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,182
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1199 Post(s)
Liked 1,354 Times
in
716 Posts
@delbiker1 that box should fit in a USPS padded envelope for $8 flat rate shipping
#1377
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,107
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 852 Post(s)
Liked 1,433 Times
in
815 Posts
@delbiker1 that box should fit in a USPS padded envelope for $8 flat rate shipping
#1379
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,184
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 472 Post(s)
Liked 1,028 Times
in
404 Posts
Folding steel panier racks
These were literally saved from the dump and I have no use for them. Free to whomever can use them. You pay shipping from eastern Pennsylvania. As the pix shows there are two, one for each side of a rear rack. Decent shape but some rust as you'd expect from neglect. When opened up the are about 7 1/2" deep. Mounting clips included and the two latches to hold them closed both work. Much like the cages the milk man used when he delivered milk to our front porch (OH, how ancient, how quaint, how hopelessly out of touch with the youth of today!!!)
PM or emails would be best. I don't check this thread and "mentions" quit working on my Safari OS years ago after one of the SW "improvements".
Edit: racks are gone. Now....gone where? Working on it.
PM or emails would be best. I don't check this thread and "mentions" quit working on my Safari OS years ago after one of the SW "improvements".
Edit: racks are gone. Now....gone where? Working on it.
Last edited by Prowler; 10-15-19 at 07:29 PM. Reason: Taken
#1380
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,319
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 985 Times
in
518 Posts
These were literally saved from the dump and I have no use for them. Free to whomever can use them. You pay shipping from eastern Pennsylvania. As the pix shows there are two, one for each side of a rear rack. Decent shape but some rust as you'd expect from neglect. When opened up the are about 7 1/2" deep. Mounting clips included and the two latches to hold them closed both work. Much like the cages the milk man used when he delivered milk to our front porch (OH, how ancient, how quaint, how hopelessly out of touch with the youth of today!!!)
PM or emails would be best. I don't check this thread and "mentions" quit working on my Safari OS years ago after one of the SW "improvements".
PM or emails would be best. I don't check this thread and "mentions" quit working on my Safari OS years ago after one of the SW "improvements".
#1381
Senior Member
Join Date: Jun 2017
Location: West Orange County, CA
Posts: 1,112
Bikes: '84 Peugeot PH10LE
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 397 Post(s)
Likes: 0
Liked 55 Times
in
39 Posts
Much like the cages the milk man used when he delivered milk to our front porch (OH, how ancient, how quaint, how hopelessly out of touch with the youth of today!!!)
Jon
#1383
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,492
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7341 Post(s)
Liked 2,439 Times
in
1,423 Posts
I think we still have Freihofers in the Hudson Valley. We also have Heidelberg bread which I like a lot.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#1384
Senior Member
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,082
Bikes: many
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 1440 Post(s)
Liked 1,383 Times
in
757 Posts
Not sure if Freihofer's is still a going concern (we moved away from the Capital District in 1999), but they used to sponsor a 5k Run for Women every year. (Looks like it's still held.) My wife and a few of her friends used to run it every year.
#1385
Senior Member
Join Date: Nov 2013
Location: Near Pottstown, PA: 30 miles NW of Philadelphia
Posts: 2,184
Bikes: 2 Trek Mtn, Cannondale R600 road, 6 vintage road bikes
Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 472 Post(s)
Liked 1,028 Times
in
404 Posts
According to a UPI article I found, the original Freihofers, in Troy, quit home delivery and those trucks I n 1972. It was then all sold to General Foods in 1987. Like Motobecane, there are bikes labled as such but it's nowhere near the same. Yes, I think whom ever now owns the name may still be putting it on shelves
#1387
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,525
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1506 Post(s)
Liked 3,459 Times
in
1,129 Posts
#1388
Senior Member
Join Date: Jun 2017
Location: West Orange County, CA
Posts: 1,112
Bikes: '84 Peugeot PH10LE
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 397 Post(s)
Likes: 0
Liked 55 Times
in
39 Posts
I'd like the Bike Bag Book if you'll split up the pair. I still have my copy of Anybody's Bike Book so don't really need it.
Jon
Jon
#1389
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,319
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 985 Times
in
518 Posts
I would take anybody's bike book.
__________________
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
Cambodia bikes, Bridgestone SRAM 2 speed, 2012 Fuji Stratos...
#1390
Eccentric Old Man
Join Date: Jan 2014
Location: BelleVegas, IL
Posts: 719
Bikes: 1986 Trek 520 Cirrus, 1979 Schwinn Traveler III, Trek T100, 1995 Trek 970, Fuji America
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Likes: 0
Liked 173 Times
in
87 Posts
#1391
Senior Member
Pair of Mavic CXP30 rims (622/700c 32h) for the price of shipping or free pickup in Houston. These were the rims on a wheelset I bought from Colorado Cyclist in 1997. When I took them apart a couple years ago, there was some light corrosion at the spoke holes, but just a bit of dust, no pitting. Brake track is almost perfect -- I'm not a hard braker. Perfectly serviceable and not ugly beyond their nature. Don't like them, will never use them, and don't want them -- hopefully, somebody feels differently.
Ladder not included.
Ladder not included.
#1392
Eccentric Old Man
Join Date: Jan 2014
Location: BelleVegas, IL
Posts: 719
Bikes: 1986 Trek 520 Cirrus, 1979 Schwinn Traveler III, Trek T100, 1995 Trek 970, Fuji America
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Likes: 0
Liked 173 Times
in
87 Posts
[QUOTE=desconhecido;21233413]Pair of Mavic CXP30 rims (622/700c 32h) for the price of shipping or free pickup in Houston. These were the rims on a wheelset I bought from Colorado Cyclist in 1997. When I took them apart a couple years ago, there was some light corrosion at the spoke holes, but just a bit of dust, no pitting. Brake track is almost perfect -- I'm not a hard braker. Perfectly serviceable and not ugly beyond their nature. Don't like them, will never use them, and don't want them -- hopefully, somebody feels differently.
Ladder not included./QUOTE]
I would be happy to take them.
Ladder not included./QUOTE]
I would be happy to take them.
#1393
Keepin it Wheel
Join Date: Aug 2011
Location: San Diego
Posts: 10,243
Bikes: Surly CrossCheck, Krampus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,415 Times
in
2,524 Posts
Pair of Mavic CXP30 rims (622/700c 32h) for the price of shipping or free pickup in Houston. These were the rims on a wheelset I bought from Colorado Cyclist in 1997. When I took them apart a couple years ago, there was some light corrosion at the spoke holes, but just a bit of dust, no pitting. Brake track is almost perfect -- I'm not a hard braker. Perfectly serviceable and not ugly beyond their nature. Don't like them, will never use them, and don't want them -- hopefully, somebody feels differently.
Ladder not included.
Ladder not included.
#1394
Senior Member
Miyata 700 x 32c wire bead Radial tire. Have no need for it and don't want to go through hassle of shipping or selling.
Anyone in the Calgary area willing to give this a new home? Not sure if they are ridable, but maybe they might serve as a relic to an enthusiast.
if no one is interested, I'll toss them in the garbage.
#1395
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,724
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,401 Times
in
1,203 Posts
Pair of dark anodized Aurora (Trek branding, mid-90's) 700c eyeletted 32 hole rims in very good condition. New rug not included.
Brake track on one shows some wear, other one looks brand new. Yours for the actual cost of shipping, likely around $20, or pick up for free in the DC/NoVA area. Easier/faster to e-mail me at rccardr@cox.net but if not, then...PM
Brake track on one shows some wear, other one looks brand new. Yours for the actual cost of shipping, likely around $20, or pick up for free in the DC/NoVA area. Easier/faster to e-mail me at rccardr@cox.net but if not, then...PM
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#1396
Senior Member
Mailed the two CXP30 rims from Houston to Bellevill, IL today and price was $12.38 for the 3lb 12oz package. Used a box that Niagara had mailed to me with rims in it. Square about the same size as the irms.
#1397
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,506
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2419 Post(s)
Liked 4,381 Times
in
2,090 Posts
Not long ago, dweenk sent me this Sturmey XRF-8 v1 hub (36h) for cost of shipping, with the caveat that the shifter was broken and it wasn't tested.
I fixed the shifter, but after lacing it up for my Gazelle commuter project, it wouldn't grab 4th or 6th. So I took it apart, checked it for wear (found very little), flushed the grease, re-lubed it with ATF and marine grease on the bearings per Dan Burkhart's recommendations, and put it back together. Now, maybe 10% of the time, you may get 4th gear. The other 90% of the time you'll get 2nd (or maybe it's first?), and it'll drive you up the wall. Also, sometimes you might grab a gear (fifth or sixth, IIRC) and get two other wildly different ratios before the pawl(s) for the correct ratio finally lock into place. Full story is somewhere here in this thread: https://www.bikeforums.net/classic-v...e-again-4.html
Whatever the case, I've decided this hub isn't for me. I've checked with dweenk and he gave me the thumbs up to pass it on again for the cost of shipping (a Medium Flat Rate box). You get hub and shifter and whatever problems are associated with them. That's it. Also, no cable anchor bolt; the threads stripped on the original.
The other thing is that you'll have to wait until I can find time to de-lace the wheel (thankfully, a Nexus 7 will work with the same spoke lengths - now to find one...) but if you can wait a week or three, I'm ready to take names for whoever wants to throw their hat into this ring...
-Kurt
I fixed the shifter, but after lacing it up for my Gazelle commuter project, it wouldn't grab 4th or 6th. So I took it apart, checked it for wear (found very little), flushed the grease, re-lubed it with ATF and marine grease on the bearings per Dan Burkhart's recommendations, and put it back together. Now, maybe 10% of the time, you may get 4th gear. The other 90% of the time you'll get 2nd (or maybe it's first?), and it'll drive you up the wall. Also, sometimes you might grab a gear (fifth or sixth, IIRC) and get two other wildly different ratios before the pawl(s) for the correct ratio finally lock into place. Full story is somewhere here in this thread: https://www.bikeforums.net/classic-v...e-again-4.html
Whatever the case, I've decided this hub isn't for me. I've checked with dweenk and he gave me the thumbs up to pass it on again for the cost of shipping (a Medium Flat Rate box). You get hub and shifter and whatever problems are associated with them. That's it. Also, no cable anchor bolt; the threads stripped on the original.
The other thing is that you'll have to wait until I can find time to de-lace the wheel (thankfully, a Nexus 7 will work with the same spoke lengths - now to find one...) but if you can wait a week or three, I'm ready to take names for whoever wants to throw their hat into this ring...
-Kurt
#1398
Senior Member
Join Date: Dec 2007
Posts: 1,373
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 70 Times
in
63 Posts
Anyone interested in vintage tubular tires? have a few matching sets and singles
I'll put up pics and more info if there is interested. They are not dry rotted, though some may need tube repair.
Shipping shouldn't be much folded in a medium box.
I'll put up pics and more info if there is interested. They are not dry rotted, though some may need tube repair.
Shipping shouldn't be much folded in a medium box.
#1399
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,912
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1794 Post(s)
Liked 2,328 Times
in
1,375 Posts
pm sent