Go Back  Bike Forums > Bike Forums > Cyclocross and Gravelbiking (Recreational)
Reload this Page >

Trek Checkpoint -- Any long-term experiences or reviews?

Notices
Cyclocross and Gravelbiking (Recreational) This has to be the most physically intense sport ever invented. It's high speed bicycle racing on a short off road course or riding the off pavement rides on gravel like :The Dirty Kanza". We also have a dedicated Racing forum for the Cyclocross Hard Core Racers.

Trek Checkpoint -- Any long-term experiences or reviews?

Old 05-09-19, 02:52 PM
  #101  
HarborBandS
HarborBandS
 
Join Date: Jun 2018
Location: Chicago Western Suburbs
Posts: 401
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 41 Times in 27 Posts
I was able to do a longer test ride of a Checkpoint SL5 at a local bike shop yesterday. They let me take the bike out for a half hour in a residential area.

My purpose: To try to get the rear IsoSpeed to flex under power, and to see if I could really notice it doing anything at all (I hadn't noticed it much at all my first test ride last fall).

The Bike: 2020 Trek Checkpoint SL5 in size 56. All stock, but this one had Ultegra shifters and brakes for some reason (it must have shipped while the newer 105 R7020 groupset was in short supply)

About Me: Not built like a "roadie"... 5'-11" and 195 lbs, muscular build. Used to race hard-tail mountain bikes in the '90's, but now in my 40's and much slower and more risk averse.

First test: Sprint from a slow roll. It felt stiff and responsive. Like a road bike.

Second test: Out of saddle sprint up a hill. I'm in Illinois, so the "hill" was a slight grade for a few hundred yards maybe 5%. That's all that was available in this location. Again, I noticed no flex in the frame.

Third test: Steady power up a hill. I stayed in the saddle and tried the same hill again with a slightly strenuous amount of power applied. Again, I did not notice anything flexing abnormally.

At this point I was really wondering if the IsoSpeed was a gimmick that did anything at all.

The next thing I did was to find pavement that was cracked, uneven, ground up, potholes, etc. I road over any obstacle I could find I did notice that typical dull carbon absorption of bumps, more of a "thud" than a metal "tink". Vibrations were deadened instead of propagated. Did the frame move under me? Not that I could tell.

Next test: Across some mowed grass at a park. No, it's not a rough section of gravel, but it was the best I was going to get from this short ride in a residential area. At this point I could feel that the ride was certainly smoother than my older aluminum Trek, and perhaps a LITTLE smoother than other carbon frames I've ridden, but I really think the tires and air pressure were a bigger factor.

My conclusion after my somewhat limited experience on the bike (for my style of riding, ability to perceive movement, body, and frame size) is that the rear IsoSpeed on the Checkpoint makes a minor impact. But I also think I'm just not really that sensitive to bumps after so many years on a hard tail mountain bike. I only notice their cumulative impact on my joints after long 20+ mile rides, and I wasn't able to replicate that on my shorter test ride.

So the Trek Checkpoint is back on my list for consideration, though I'm probably now moving my purchase out to Spring of 2021, so I guess we will see what options are around next year at this time. Based on the popular reviews of the Checkpoint, I wouldn't be surprised to see a few changes.
HarborBandS is offline  
Old 05-09-19, 03:49 PM
  #102  
jfranci3
Senior Member
 
Join Date: Apr 2009
Posts: 106
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
I have a 58 Checkpoint SL after my Crockett frame was generously warrantied and I upgraded a bit (trek is the best). I got the carbon frame for the ISO rear, as I planned on using the bike an endurance bike too.

After spending some time with it, I wouldn't do CF again. The CF frame has nicer cable routing (hosed cable end-to-end is nice for sandy areas and crossing water), more bottle cage bosses, uses a seat mast, and the Di2 battery compartment (which is great for tube storage), but it rides the same as my basic Emonda ALR and my Crockett (with Specy zigzag seat post) on the same tires/wheels at 85psi. On rough pavement and hitting potholes, there's no difference. In contrast, I was getting abused on my Crockett on road tires until I bought the SBC zig zag seat post. I'd save the money and get the 300-series ALR frame and a fancy seat post (if needed) if I were to do it again. The seat mast is a particular PITA as I need a bit more setback and can't just change the post. I don't have thigh gap and my legs also rub the wider CF tubes.

I've got 43mm tires on there, and I wouldn't go over 45mm after having a look at it. You can run a bit larger, but I managed to sand the paint off my old bike running too large of tires and 43mm manages on soft sand.


Tip: You can be REALLY aggressive in shortening the cable housing between the bars and downtube guide. There are some complaint about it being annoying and hitting your leg, but I've got it internally routed on my bars which open up close to the stem and just the bare min of cable - it's nice and clean. It can rub the paint, so put a clear frame protector sticker there.
jfranci3 is offline  
Old 06-03-19, 07:53 AM
  #103  
Jamg2412
Alberto
 
Jamg2412's Avatar
 
Join Date: May 2018
Location: Aberdeen
Posts: 22

Bikes: Specialized Diverge E5

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 0 Times in 0 Posts
Originally Posted by MAGAIVER View Post
Borrowed a set of 27,5" wheels with 2.2 mtb tires on the local bike shop to test fit on my Checkpoint ALR 4, clearances are good even with the rear dropout all the way forward. No problems with the FD either.
The front wheel the lbs had was a 15mm thru axle so I did not fit it on the bike, rear dropout is all the way forward on thos pictures, Total wheel diameter is just a little bit smaller then the 700c wheel with the 40c Maxxis Ramblers.



What is your tire clearance in the non-drive side and drive-side? is it the same? I have the same frame and the drive side is closer to the tyre.
Jamg2412 is offline  
Old 06-04-19, 02:02 PM
  #104  
MAGAIVER
Senior Member
 
MAGAIVER's Avatar
 
Join Date: May 2009
Location: Brazil, Londrina PR
Posts: 235

Bikes: Kona Unit, Kona Kahuna, Kona Dew DL, Scott Big Jon, Trek Checkpoint ALR4, Sparton ST-500, Haro Team Issue

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Liked 7 Times in 6 Posts
The non drive side has more clearence then the drive side, that picture was taken with the droput fully slammed forward, I moved it back a bit and gained some clearence. Keep in mind that the Continental X-King tire is narrower then most tires on the same claimed width. I am currently using Kenda Small Block 8 Pro 27,5x2.1 and it is wider then the 27,5x2.2 X-Kings.
MAGAIVER is offline  
Old 10-08-19, 05:39 AM
  #105  
z1913
Newbie
 
Join Date: Oct 2019
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I have SL5 for a year now and I am not experiencing any flex on smooth roads.
z1913 is offline  
Old 10-08-19, 05:49 AM
  #106  
z1913
Newbie
 
Join Date: Oct 2019
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I am using Ritchey Venture Max on my SL5 (the cheaper Comp version) and I am very happy with that. Drops is now my favourite bar position!
z1913 is offline  
Old 10-08-19, 06:04 AM
  #107  
z1913
Newbie
 
Join Date: Oct 2019
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Can you please share further experiences with the 27.5 wheels on your checkpoint? I am considering one more wheelset for my SL5 and wondering if 27.5 is a way to go (although Trek officially does not recommend it).
For now I have the stock wheels, I got alu Zipp 30 with 28 Schwalbe Pro One for road riding and would like to get more offroad option too - in the 45-47mm range.
How the bike feels with the 27.5? Any issues, concerns? Thanks a lot!
z1913 is offline  
Old 10-13-19, 07:45 PM
  #108  
Vegas3416
Junior Member
 
Join Date: Mar 2019
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Trek ALR5

Great bike. 500miles on it and love it.
Vegas3416 is offline  
Old 10-13-19, 07:46 PM
  #109  
Vegas3416
Junior Member
 
Join Date: Mar 2019
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Donít have 10 posts so canít post a pic but running 45mm riddlers on mine
Vegas3416 is offline  
Old 10-14-19, 07:36 AM
  #110  
MAGAIVER
Senior Member
 
MAGAIVER's Avatar
 
Join Date: May 2009
Location: Brazil, Londrina PR
Posts: 235

Bikes: Kona Unit, Kona Kahuna, Kona Dew DL, Scott Big Jon, Trek Checkpoint ALR4, Sparton ST-500, Haro Team Issue

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Liked 7 Times in 6 Posts
I never had any issues with mine with 27,5 wheels, works fine but if you`re only going for a 45-47c tire stick to 700c, it'll fit. The only reason to go 650b on the Checkpoint is to use mountain bike tires.
MAGAIVER is offline  
Old 10-27-19, 03:12 AM
  #111  
ciquta
Junior Member
 
Join Date: Jun 2015
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Vegas3416 View Post
Donít have 10 posts so canít post a pic but running 45mm riddlers on mine
what internal rim size?

how much clearance left?
do you think it can get 47mm safely?


thanks for sharing
ciquta is offline  
Old 10-28-19, 05:46 AM
  #112  
Vegas3416
Junior Member
 
Join Date: Mar 2019
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
You could potentially get a 47 in the rear and upfront you might be able to depending on brand of tire but the biggest issue you get upfront is toe clipping and it would be tight at the top of fork as with the 45s I have there is roughly about a finger spacing left. Tight turns you will have more of a chance to clip toe. On mine I do clip sometimes but if you are aware of where you are during pedal stroke itís ok but canít count on that. In rear I have tire all the way pushed up so if I were to move the axle back I would definitely think you could get a 47 in there. Mind you I am running stock wheels but tubeless.
Vegas3416 is offline  
Old 11-04-19, 01:09 PM
  #113  
NyoGoat
Senior Member
 
Join Date: Jan 2008
Location: Utah
Posts: 90

Bikes: CAAD10 105

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Likes: 0
Liked 2 Times in 1 Post
What about racks?

I just picked up a used SL5. I was looking at both AL and SL models. Now that I have it i'm nervous to install a rack on a carbon frame and i've wondered if I should have gone with the AL model. I intend to commute during the week and then explore on the weekends. Is there high risk of issues long term with running mounted racks and bags to this bike?
NyoGoat is offline  
Old 11-04-19, 01:21 PM
  #114  
jfranci3
Senior Member
 
Join Date: Apr 2009
Posts: 106
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 38 Post(s)
Likes: 0
Liked 2 Times in 2 Posts
Why?
You bought a gravel / adventure bike with rack mounts. You'd run bottle cages on it right? What's the difference?
If you're really paranoid, just run the Bontrager rack. If something magically goes wrong, there's only one neck to choke.


Carbon is not that much different than Aluminum. I'm pretty sure the rack eyelets are stainless embedded in the carbon frame anyway.

Last edited by jfranci3; 11-04-19 at 01:52 PM.
jfranci3 is offline  
Old 11-04-19, 01:29 PM
  #115  
drewtk
Member
 
Join Date: Sep 2019
Posts: 34
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 12 Times in 12 Posts
Originally Posted by NyoGoat View Post
I just picked up a used SL5. I was looking at both AL and SL models. Now that I have it i'm nervous to install a rack on a carbon frame and i've wondered if I should have gone with the AL model. I intend to commute during the week and then explore on the weekends. Is there high risk of issues long term with running mounted racks and bags to this bike?
Carbon fiber is crazy strong - you'll be fine. I had to cut a carbon fiber seat post down once, using a hacksaw. That was way harder than expected.

Back in engineering school, we did lab experiments to test the breaking point of carbon fiber by subjecting it to bending. I can't remember the numbers, but again, the numbers were extremely high so long as you didn't subject the carbon fiber to a sharp impact. We did the test with new carbon fiber samples and another where we dropped steel balls onto the samples from a few feet. Those latter samples did very poorly.
drewtk is offline  
Old 11-04-19, 02:00 PM
  #116  
z1913
Newbie
 
Join Date: Oct 2019
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by NyoGoat View Post
I just picked up a used SL5. I was looking at both AL and SL models. Now that I have it i'm nervous to install a rack on a carbon frame and i've wondered if I should have gone with the AL model. I intend to commute during the week and then explore on the weekends. Is there high risk of issues long term with running mounted racks and bags to this bike?
I did a family touring with mine SL5 with heavy loaded rear racks and I had no issues at all.
z1913 is offline  
Old 11-04-19, 04:21 PM
  #117  
mdcoram
Junior Member
 
Join Date: Oct 2019
Location: Midwest
Posts: 19

Bikes: Merlin Ti, Felt FR3, Trek Fuel EX7, Trek Checkpoint AL

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Liked 3 Times in 3 Posts
Originally Posted by MAGAIVER View Post
Just got My Checkpoint ALR 4 last Week. So far I did 2 50km off-road rides a commuted to work with it a few times. I really like the bike and I'm quite surprised on how smooth it feels.
I usually ride a rigid 29er with wide rims and 2.4 tires off road, the Checkpoint on the stock 35c Kenda tires is not much rougher, I just have to be more carefull on rocky descents.

That country road looks like a blast!
mdcoram is offline  
Old 11-04-19, 04:24 PM
  #118  
mdcoram
Junior Member
 
Join Date: Oct 2019
Location: Midwest
Posts: 19

Bikes: Merlin Ti, Felt FR3, Trek Fuel EX7, Trek Checkpoint AL

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Liked 3 Times in 3 Posts
Originally Posted by NyoGoat View Post
I just picked up a used SL5. I was looking at both AL and SL models. Now that I have it i'm nervous to install a rack on a carbon frame and i've wondered if I should have gone with the AL model. I intend to commute during the week and then explore on the weekends. Is there high risk of issues long term with running mounted racks and bags to this bike?
Your frame is made to handle much more stress than your racks are likely to ever create. Ride and enjoy. Repeat!
mdcoram is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ian401
Cyclocross and Gravelbiking (Recreational)
23
06-25-19 01:16 PM
Abu Mahendra
Cyclocross and Gravelbiking (Recreational)
20
08-03-18 04:25 PM
RockiesDad
Cyclocross and Gravelbiking (Recreational)
64
01-03-18 04:29 AM
trail_monkey
Cyclocross and Gravelbiking (Recreational)
6
07-03-16 09:00 AM
pamaguahiker
Touring
3
10-15-13 09:52 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.