Need help identifying barnfind bicycle
#1
Newbie
Thread Starter
Join Date: Jun 2023
Location: Piney Creek
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Need help identifying barnfind bicycle
We found and old Kent bicycle in an abandoned building. It is a 26 inch womens single speed. It had labels indicating it was made in Holland. It is weathered but most of the paint is intact enough to be legible and indicates the brand. It has a headlight. the chain guard has "Rite Kite" on it and next the stem it says "Power Ride". On the bottom of the crank we find three numbers stamped. They are difficult to read but appear to be 263 This forum will not let me post the pictures or a link to my Onedrive. If you think you can help please message me and I will provide a link to the photos. Thank you in advance for any help you might give.
#2
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
I don't think you can get a more precise ID than what you have --it's a Kent ladies bike with 26” wheels (i would be more specific: what tire size exactly?), made in Holland.
Kent is not a manufacturer. They import cheap bikes made all over the world. It sounds like yours was made in the 60’s or early 70’s.
Kent is not a manufacturer. They import cheap bikes made all over the world. It sounds like yours was made in the 60’s or early 70’s.
__________________
www.rhmsaddles.com.
www.rhmsaddles.com.
#3
Senior Member
Join Date: Oct 2022
Posts: 1,378
Bikes: a couple
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 563 Post(s)
Liked 863 Times
in
456 Posts
We found and old Kent bicycle in an abandoned building. It is a 26 inch womens single speed. It had labels indicating it was made in Holland. It is weathered but most of the paint is intact enough to be legible and indicates the brand. It has a headlight. the chain guard has "Rite Kite" on it and next the stem it says "Power Ride". On the bottom of the crank we find three numbers stamped. They are difficult to read but appear to be 263 This forum will not let me post the pictures or a link to my Onedrive. If you think you can help please message me and I will provide a link to the photos. Thank you in advance for any help you might give.
#4
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
the most likely manufacturer is Batavus
the rear hub is probably a Fichtel & Sachs product whether badged as Torpedo, Sachs, Centrix, etc
it should bear a date marking on the shell
-----
the most likely manufacturer is Batavus
the rear hub is probably a Fichtel & Sachs product whether badged as Torpedo, Sachs, Centrix, etc
it should bear a date marking on the shell
-----
Likes For juvela:
#5
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
I don't think you can get a more precise ID than what you have --it's a Kent ladies bike with 26” wheels (i would be more specific: what tire size exactly?), made in Holland.
Kent is not a manufacturer. They import cheap bikes made all over the world. It sounds like yours was made in the 60’s or early 70’s.
Kent is not a manufacturer. They import cheap bikes made all over the world. It sounds like yours was made in the 60’s or early 70’s.
-----
T-Mar writes on the Kent marque here -
"Kent was never a "house brand". The Kent brand dates back to 1958 and since it's beginning has been owned by Kent International. The company is headquartered in New Jersey, where the bicycles were originally manufactured. Over the years, the bicycles also been manufactured by various Asian sources, though the company has recently brought back manufacturing to a California factory. The Kent brand was marketed through various large retail chains, which may have given the impression that it was a house brand but these retailers did not own the brand, so Kent should not be considered a house brand. It's worth noting that Kent International has revived and now owns two brands familiar to many C& V members; Shogun and Takara."
__________________
https://www.bikeforums.net/21337799-post17.html
manufacturing bicycles today on U.S. soil
https://kent.bike/
-----
Likes For juvela:
#6
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
-----
James -
i note that there is a pushbutton switch mounted on the handlebar to control the headlamp but there is no obvious power source for the lamp. is there a battery, or provision for one, inside the lamp housing?
note the cycle's interesting propstand. it bears an external sleeve on the shaft so that length can be adjusted with the aid of a binder collar. no need to hacksaw off a portion of one's ESGE or Greenfield. stand can be moved from one cycle to another with a differing bottom bracket height and still be a good fit.
are you able to determine the purpose of the fitting on the top of the "top tube" (portage grip!) in the centre of the frame?
according to what T-Mar has written regarding the Kent marque 1958 would have been the first year for operation of Kent International, based in Fairfield New Jersey.
wonder if it possible there may have been a second Kent marque (just wylde speculation ).
-----
James -
i note that there is a pushbutton switch mounted on the handlebar to control the headlamp but there is no obvious power source for the lamp. is there a battery, or provision for one, inside the lamp housing?
note the cycle's interesting propstand. it bears an external sleeve on the shaft so that length can be adjusted with the aid of a binder collar. no need to hacksaw off a portion of one's ESGE or Greenfield. stand can be moved from one cycle to another with a differing bottom bracket height and still be a good fit.
are you able to determine the purpose of the fitting on the top of the "top tube" (portage grip!) in the centre of the frame?
according to what T-Mar has written regarding the Kent marque 1958 would have been the first year for operation of Kent International, based in Fairfield New Jersey.
wonder if it possible there may have been a second Kent marque (just wylde speculation ).
-----
Last edited by juvela; 06-14-23 at 11:07 AM. Reason: spellin'
#7
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
#9
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,271
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3814 Post(s)
Liked 3,345 Times
in
2,182 Posts
I don't think you can get a more precise ID than what you have --it's a Kent ladies bike with 26” wheels (i would be more specific: what tire size exactly?), made in Holland.
Kent is not a manufacturer. They import cheap bikes made all over the world. It sounds like yours was made in the 60’s or early 70’s.
Kent is not a manufacturer. They import cheap bikes made all over the world. It sounds like yours was made in the 60’s or early 70’s.
-----
had looked for these links earlier regarding Kent International without success
here they are now
company opened a manufacturing plant in South Carolina in 2016
there is an article about it in Forbes Magazine here -
https://www.forbes.com/sites/forbest...h=40cf913f13e8
forum post -
https://www.bikeforums.net/21538753-post1368.html
-----
#10
Senior Member
Join Date: Sep 2010
Location: Rupert's Land
Posts: 1,243
Bikes: 1981 Raleigh GP, 1985 Norco Bush Pilot, . . .
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Liked 187 Times
in
136 Posts
The Kent trademark name was created by Philkam Cycle Supply Co. Inc. of Newark, New Jersey in August 1958.
Philkam Cycle began in 1947, but the family business extends back to 1909 with Abraham Kamler. This is how the current Kent International can claim over 100 years of experience.
https://en.wikipedia.org/wiki/Kent_International
Philkam Cycle began in 1947, but the family business extends back to 1909 with Abraham Kamler. This is how the current Kent International can claim over 100 years of experience.
https://en.wikipedia.org/wiki/Kent_International
Last edited by Hummer; 06-23-23 at 01:17 AM. Reason: wording correction and spelling
Likes For Hummer:
#13
Senior Member
Join Date: Sep 2010
Location: Rupert's Land
Posts: 1,243
Bikes: 1981 Raleigh GP, 1985 Norco Bush Pilot, . . .
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Liked 187 Times
in
136 Posts
Another Kent made in Holland from ebay. Serial number on the dropout. Centrix hub by Gottschalk.
Kent Ride Rite
Kent Ride Rite
Kent Ride Rite
Kent Ride Rite
#14
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,007
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,609 Times
in
1,765 Posts
Although made in Holland, they were made exclusively for the North-American market. No Dutchman would recognize it, and matching it to a manufacturer is difficult without additional information.
Batavus and Union are likely suspects, though.
Batavus and Union are likely suspects, though.
Likes For non-fixie: