ISO and for trade thread part 5
08-03-19, 06:09 PM
#1451
Senior Member
08-05-19, 02:32 AM
#1452
Senior Member
ISO / desperately WTB two dust caps for ca. 1950's Lyotard pedals.
These dust caps have an internal thread (MKS replacements don't work).
Please note that the more common Lyotard dust cap with octagonal shape and text written on top (as shown here) will not fit in my case, my pedals are slightly different with the thread ever-so-slightly smaller. What I believe is the correct dust cap model (here's hoping...) can be seen in this picture below. I've searched everywhere. Anyone have spares of these?
These dust caps have an internal thread (MKS replacements don't work).
Please note that the more common Lyotard dust cap with octagonal shape and text written on top (as shown here) will not fit in my case, my pedals are slightly different with the thread ever-so-slightly smaller. What I believe is the correct dust cap model (here's hoping...) can be seen in this picture below. I've searched everywhere. Anyone have spares of these?
08-05-19, 09:32 AM
#1453
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,481
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7333 Post(s)
Liked 2,430 Times
in
1,419 Posts
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
08-05-19, 03:23 PM
#1454
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,020
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4501 Post(s)
Liked 6,367 Times
in
3,663 Posts
ISO / desperately WTB two dust caps for ca. 1950's Lyotard pedals.
These dust caps have an internal thread (MKS replacements don't work).
Please note that the more common Lyotard dust cap with octagonal shape and text written on top (as shown here) will not fit in my case, my pedals are slightly different with the thread ever-so-slightly smaller. What I believe is the correct dust cap model (here's hoping...) can be seen in this picture below. I've searched everywhere. Anyone have spares of these?
These dust caps have an internal thread (MKS replacements don't work).
Please note that the more common Lyotard dust cap with octagonal shape and text written on top (as shown here) will not fit in my case, my pedals are slightly different with the thread ever-so-slightly smaller. What I believe is the correct dust cap model (here's hoping...) can be seen in this picture below. I've searched everywhere. Anyone have spares of these?
08-05-19, 10:47 PM
#1455
Senior Member
08-06-19, 03:46 PM
#1457
TXHC
Have: Shimano FC-M900 XTR cranks arms 170mm 110/74bcd
good condition with light rub
i have some 46/36/26 Biopace chainrings and nuts/bolts if desired
Want: equivalent level 130bcd crankset for use with 103mm bottom bracket
prefer 165 or 170
thanks!
good condition with light rub
i have some 46/36/26 Biopace chainrings and nuts/bolts if desired
Want: equivalent level 130bcd crankset for use with 103mm bottom bracket
prefer 165 or 170
thanks!
08-07-19, 07:45 AM
#1458
Newbie
Have: A bunch of classic 700c tubular rims (all 36h):
Mavic GP4, GL330
Wolber/Super Champion Arc en ciel (both polished and matte silver)
Also 27 in Weinmann non-concave (flat?) clinchers
ISO: 700c Mavic MA2 36h.
For a wheel building project, but open to wheel sets as well
Thanks!
Mavic GP4, GL330
Wolber/Super Champion Arc en ciel (both polished and matte silver)
Also 27 in Weinmann non-concave (flat?) clinchers
ISO: 700c Mavic MA2 36h.
For a wheel building project, but open to wheel sets as well
Thanks!
Last edited by TrboDieselPwrd; 08-07-19 at 02:35 PM.
08-07-19, 10:57 AM
#1459
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,330
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 516 Times
in
280 Posts
08-07-19, 11:11 AM
#1460
Senior Member
Join Date: Nov 2010
Location: Magnolia State, 100° with 110% humidity
Posts: 1,230
Bikes: American, Italian, and Japanese.. in no particular order.
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 276 Times
in
128 Posts
ISO: used Shimano 8 - 10spd bar end shifter pods with/without shift levers.
thank you
thank you
08-07-19, 02:35 PM
#1461
Newbie
08-09-19, 07:00 AM
#1462
Senior Member
ISO / desperately WTB two dust caps for ca. 1950's Lyotard pedals.
These dust caps have an internal thread (MKS replacements don't work).
Please note that the more common Lyotard dust cap with octagonal shape and text written on top (as shown here) will not fit in my case, my pedals are slightly different with the thread ever-so-slightly smaller. What I believe is the correct dust cap model (here's hoping...) can be seen in this picture below. I've searched everywhere. Anyone have spares of these?
These dust caps have an internal thread (MKS replacements don't work).
Please note that the more common Lyotard dust cap with octagonal shape and text written on top (as shown here) will not fit in my case, my pedals are slightly different with the thread ever-so-slightly smaller. What I believe is the correct dust cap model (here's hoping...) can be seen in this picture below. I've searched everywhere. Anyone have spares of these?
__________________
Chris
Crapmaster Emeritus
Chris
Crapmaster Emeritus
08-09-19, 07:15 AM
#1463
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
Not exactly C&V, but I know I'm not the only Campy 10s user here 
ISO: Campy/Fulcrum 10s (yes, it covers 9-12) Campy cassette freehub body for standard/12mm axle (prefer new or very few miles)
Have: same for for OS (17mm) axle, new
ISO: Campy/Fulcrum 10s (yes, it covers 9-12) Campy cassette freehub body for standard/12mm axle (prefer new or very few miles)
Have: same for for OS (17mm) axle, new
08-09-19, 07:09 PM
#1464
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2412 Post(s)
Liked 4,373 Times
in
2,086 Posts
I have an unusual ISO list, and it's not for me (well, not the end user anyway...the journey is my thing though!). I don't usually mention it, but I currently work at a university-based non-profit for kids bike riding/bike safety.
We recently tapped out the bike budget by buying three, brand-new Trek Precaliber bikes for our bike rodeos, but a nearby co-op - Recyclable Bicycle Exchange of Ft. Lauderdale (if you haven't been there, you need to go) - had these 650C Andante kids' lugged steel track bikes which were made roughly 15-20 years ago for the Brian Piccolo Park Velodrome. They have about 40 (half 650C, half 700C), and nobody has shown interest in them for ages.
Well, a C&V'er gotta do what a C&V'er gotta do - I convinced the staff that we needed some, and Jeff at RBX donated three of them to us - three, as I've got no budget to work with, and because only three of them were built with road fork crowns (don't worry about the blades, they are Columbus road blades).
That said, my master plan is to convert them into city-style singlespeeds and post gradual build logs on our site, ibikesafe.org. I'm pretty much turning them into a Raleigh Space Riders with Columbus tubing. To do that, I'm going to need a few bits. If anyone would be willing to help out with this, I'd really appreciate it.
This is what I'm going to need for each:
Would be eternally grateful for the assistance.
-Kurt
We recently tapped out the bike budget by buying three, brand-new Trek Precaliber bikes for our bike rodeos, but a nearby co-op - Recyclable Bicycle Exchange of Ft. Lauderdale (if you haven't been there, you need to go) - had these 650C Andante kids' lugged steel track bikes which were made roughly 15-20 years ago for the Brian Piccolo Park Velodrome. They have about 40 (half 650C, half 700C), and nobody has shown interest in them for ages.
Well, a C&V'er gotta do what a C&V'er gotta do - I convinced the staff that we needed some, and Jeff at RBX donated three of them to us - three, as I've got no budget to work with, and because only three of them were built with road fork crowns (don't worry about the blades, they are Columbus road blades).
That said, my master plan is to convert them into city-style singlespeeds and post gradual build logs on our site, ibikesafe.org. I'm pretty much turning them into a Raleigh Space Riders with Columbus tubing. To do that, I'm going to need a few bits. If anyone would be willing to help out with this, I'd really appreciate it.
This is what I'm going to need for each:
- A singlespeed freewheel
- 650C tires
- The one definite C&V part: Kids-sized North Road handlebars. Will probably need stems too, as the road stems are probably 26.0, and the North Roads likely 25.4.
Would be eternally grateful for the assistance.
-Kurt
__________________
Likes For cudak888:
08-10-19, 02:18 AM
#1465
Senior Member
08-10-19, 06:15 AM
#1466
Senior Member
08-11-19, 12:52 AM
#1468
Senior Member
Alright! Really appreciate you guys having a look though.
08-13-19, 10:21 AM
#1470
'84 and '09 Pinarellos
Join Date: Jul 2008
Location: Seattle, WA
Posts: 393
Bikes: '84 Pinarello Record Equipe rebuilt with Campy Chorus/ Record; 2009 Pinarello Paris/ Campy SR 11sp; Litespeed Tuscany w Campy SR 11 speed
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 3 Times
in
1 Post
08-13-19, 10:34 PM
#1472
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2412 Post(s)
Liked 4,373 Times
in
2,086 Posts
Have tried asking for this as a unit, now asking around for just the spindle:
I am ISO one Campagnolo English 68-SS spindle, 114.5mm long (post CPSC). Don't care what logo it has. Must have nice races.
Got a few offers going on eBay, but if you have one, tell me what you're looking for.
-Kurt
I am ISO one Campagnolo English 68-SS spindle, 114.5mm long (post CPSC). Don't care what logo it has. Must have nice races.
Got a few offers going on eBay, but if you have one, tell me what you're looking for.
-Kurt
__________________
08-15-19, 05:25 AM
#1473
Newbie
ISO 10x1x137mm Axle
ISO of QR rear axle for Shimano HB-1050 freewheel hub. Axle is 10x1x137mm. Also need cones, bearings & QR skewer.
08-15-19, 07:06 PM
#1474
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2412 Post(s)
Liked 4,373 Times
in
2,086 Posts
Still looking for a 27.2 Super Record seatpost in trade for a 26.8 Super Record seatpost.
-Kurt
-Kurt
__________________
08-16-19, 02:53 PM
#1475
Junior Member
Join Date: Aug 2019
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ISO Vintage Soviet Road Bike
I'm looking for a vintage Karkhov XB3, please let me know if you have one or any other vintage Soviet road bike. I will gladly pay for shipping
