What 10s cassette should I get ?
#1
Newbie
Thread Starter
What 10s cassette should I get ?
I need to replace my cassette and am looking for a new (3x)10 speed cassette. Now I'm running a SRAM PG1020 which works fine for me. I have a budget of maximum 60 euro.
I looked on different stores and it looks like I have many options. I tried to find and read comparisons before different cassettes but have barely found any useful info. This are my options, I made a small chart where the average price of the cassette is also displayed :
Do you guys have any experience with any of these ? What would you recommend me ?
I looked on different stores and it looks like I have many options. I tried to find and read comparisons before different cassettes but have barely found any useful info. This are my options, I made a small chart where the average price of the cassette is also displayed :
Do you guys have any experience with any of these ? What would you recommend me ?
#4
Banned
you got the graph, it gives you no answers? what is sold in the bike shop you like to visit... ??
cassettes are a consumable, they wear out in normal use.. why not another Sram, it was Adequate was it not?
go cheap, its up to you.
... online expressions of obsessing. {lots of computer workers seem to do that, here.)
....
cassettes are a consumable, they wear out in normal use.. why not another Sram, it was Adequate was it not?
go cheap, its up to you.
... online expressions of obsessing. {lots of computer workers seem to do that, here.)
....
#5
Senior Member
Join Date: Oct 2015
Location: Knoxville
Posts: 95
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Depends on what your front rings are. I run SRAM 1170 11-36 on one bike with a 52/36 front setup and a SRAM Red 22 Wifli RD and it is great. Also have a SRAM 1070 11-32 10 speed on another that I use with a 50/34 setup with an Ultegra medium cage RD with no issues. Yes, they both look like pizza trays, but I can sit in the saddle and spin for a long time with either one. Don't move very fast, but can get into a nice rhythm. Comes in handy when doing a 50 mile ride with 10,000+ feet of climbing.
#6
Senior Member
Join Date: Jan 2011
Posts: 2,977
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1638 Post(s)
Liked 741 Times
in
495 Posts
I agree with fietsbob.
I would stick with a 36t cassette as your derailleur may not be able to handle a 42t.
I would stick with a 36t cassette as your derailleur may not be able to handle a 42t.
__________________
nine mile skid on a ten mile ride
nine mile skid on a ten mile ride
#9
Newbie
Thread Starter
I'm gonna stay with 11-36t. What I'm trying to ask is if these are all of the same quality and material, or do I 'get what I pay for' ?
#11
Senior Member
Join Date: Sep 2015
Location: /dev/null
Posts: 675
Bikes: Soma Double Cross Disc (2017), red Hardrock FS (circa 1996)
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 217 Post(s)
Liked 155 Times
in
102 Posts
I have used Sunrace 8s and 9s, great cassettes, never had a problem with them. Another info you may want to look at is the progression (exact sequence) of the cogs. Here is some list, may not be totally up to date: https://www.sheldonbrown.com/k10.shtml. For example, some 11-36 cassettes have 11-12-13 and bigger gaps somewhere in the middle, others have 11-13-15 and smaller gaps in the middle.
#12
Senior Member
Join Date: Mar 2013
Location: Tucson Az
Posts: 1,678
Bikes: 2015 Ridley Fenix, 1983 Team Fuji, 2019 Marin Nail Trail 6
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 227 Times
in
137 Posts
Bottom line (generally).
Lighter and stronger, more expensive.
I see three different lines in both Shimano and Sram in that chart. As you go up in price, you go up in quality.
Only you can decide if it's worth it for you to spend the money on higher end components.
If it were me and I had a bike with a pg1020, per the chart, I'd buy the pg1030 and be happy. Assuming you have Sram Apex, a Sram Force pg1070 would be a case of overkill.
Lighter and stronger, more expensive.
I see three different lines in both Shimano and Sram in that chart. As you go up in price, you go up in quality.
Only you can decide if it's worth it for you to spend the money on higher end components.
If it were me and I had a bike with a pg1020, per the chart, I'd buy the pg1030 and be happy. Assuming you have Sram Apex, a Sram Force pg1070 would be a case of overkill.
Last edited by Wileyrat; 09-08-17 at 04:07 PM.
#13
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,635
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,532 Times
in
1,003 Posts
My guess.. without knowing really.. is functionally equivalent, but the more expensive ones are lighter-weight alloys that may not wear as long?
#14
In the wind
The more expensive ones are generally lighter because the steel cogs are mounted on an aluminium carrier, so they wear about the same as the cheaper all-steel models.
Sometimes the larger cogs are aluminium, for example the SRAM XG-1080, but I don't think any of those are in the chart.
Sometimes the larger cogs are aluminium, for example the SRAM XG-1080, but I don't think any of those are in the chart.