First real Classic, need help!
#1
Member
Thread Starter
Join Date: Jul 2017
Location: Québec City
Posts: 28
Bikes: 2016 Marinoni Pista, 1981 Ompax Dura Pro, 1989 Atala Chorus, 1970's John Doe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
First real Classic, need help!
Hi folks, I'm new here!!
So I just bought a really nice 1972(??) classic steel road bike from a guy who inherited it from is uncle and tought it was made of Aluminium! The bike is about 22,xx pound so I can understand him haha
The components are the following
Frame : ??? Reynolds 531 or Colombus SL...
Front Hub : Campagnolo - Round holes
Rear Hub : Campagnolo Record
RD : Campagnolo Nuovo Record Patent 72
FD : Shimano 600
Rear Dropouts : Campagnolo
Front Dropouts : Campagnolo
Crankset : Campagnolo Nuovo Record
Pedals : Campagnolo
Seat Post : Campagnolo
Saddle : Cinelli Unicanitor
Brakes : Universal Super 68
Stem and Handlebar : 3TTT record 95mm
I am very curious about the frame tho, it has been repainted and doesn't have any detail/carving that can help me identify the brand/Model. I did a little research and it doesn't seem to be any sort of Raleigh or classic italian bike (colnago bianchi, bottechia, cinelli etc..) The most logical choice in Québec would be a Marinoni but there is no ¨Fleur de Lys¨ anywhere. There is a carving under the BB case that says T 0311
Edit : There is also M.G and O.O carved with small dots under the BB, could it be an ealry Marinoni?
Anyway I need your help to identify this frame, see pictures below!
So I just bought a really nice 1972(??) classic steel road bike from a guy who inherited it from is uncle and tought it was made of Aluminium! The bike is about 22,xx pound so I can understand him haha
The components are the following
Frame : ??? Reynolds 531 or Colombus SL...
Front Hub : Campagnolo - Round holes
Rear Hub : Campagnolo Record
RD : Campagnolo Nuovo Record Patent 72
FD : Shimano 600
Rear Dropouts : Campagnolo
Front Dropouts : Campagnolo
Crankset : Campagnolo Nuovo Record
Pedals : Campagnolo
Seat Post : Campagnolo
Saddle : Cinelli Unicanitor
Brakes : Universal Super 68
Stem and Handlebar : 3TTT record 95mm
I am very curious about the frame tho, it has been repainted and doesn't have any detail/carving that can help me identify the brand/Model. I did a little research and it doesn't seem to be any sort of Raleigh or classic italian bike (colnago bianchi, bottechia, cinelli etc..) The most logical choice in Québec would be a Marinoni but there is no ¨Fleur de Lys¨ anywhere. There is a carving under the BB case that says T 0311
Edit : There is also M.G and O.O carved with small dots under the BB, could it be an ealry Marinoni?
Anyway I need your help to identify this frame, see pictures below!
Last edited by Tha Bastard; 07-28-17 at 05:07 PM. Reason: Pictures didn't work
#2
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
Hmmm...another soon-to-be-surprised Photobucket user
Your photos don't show because PB is requiring that you upgrade to a paid membership in order to use third-party hosting of photos. Sorry to be the bearer of bad news, especially as the component list suggests a pretty cool bike I'd like to get a gander at.
DD
Your photos don't show because PB is requiring that you upgrade to a paid membership in order to use third-party hosting of photos. Sorry to be the bearer of bad news, especially as the component list suggests a pretty cool bike I'd like to get a gander at.
DD
#3
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,539
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 932 Post(s)
Liked 1,309 Times
in
491 Posts
Try using imgur instead of photobucket.
#4
Member
Thread Starter
Join Date: Jul 2017
Location: Québec City
Posts: 28
Bikes: 2016 Marinoni Pista, 1981 Ompax Dura Pro, 1989 Atala Chorus, 1970's John Doe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Oh oh, the pictures are there in the preview so I expected it to work, I'll try Imgur!
Thanks
Thanks
#5
Member
Thread Starter
Join Date: Jul 2017
Location: Québec City
Posts: 28
Bikes: 2016 Marinoni Pista, 1981 Ompax Dura Pro, 1989 Atala Chorus, 1970's John Doe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pictures should work now!
#6
Senior Member
Join Date: May 2015
Posts: 252
Bikes: 1986 Centurion Facet 105 Equipped, Centurion Carbon-R 105 Equipped,Diamondback Zetec 2.1
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Liked 0 Times
in
0 Posts
Looks like the first bike I bought to start riding around 1985... Univega.
#7
Senior Member
Join Date: Apr 2013
Location: Amsterdam
Posts: 1,662
Bikes: 1980 Koga-Miyata Gentsluxe-S, 1998 Eddy Merckx Corsa 01, 1983 Tommasini Racing, 2012 Gulf Western CAAD10, 1980 Univega Gran Premio
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 600 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
The '72 date on your RD doesn't mean the bike is from 1972, any more than the Shimano 600 FD means its from whatever date is on that component. Most of the bikes I've seen from the 1970s have the cable routing above the bottom bracket. Not sure if there were makers who routed below BB before around 1980 or so, but it seems uncommon at best.
What size is the seat post? Have you shined a light up into the steerer tube to see if you have the SL rifling?
What size is the seat post? Have you shined a light up into the steerer tube to see if you have the SL rifling?
#8
Senior Member
Join Date: Apr 2013
Location: Amsterdam
Posts: 1,662
Bikes: 1980 Koga-Miyata Gentsluxe-S, 1998 Eddy Merckx Corsa 01, 1983 Tommasini Racing, 2012 Gulf Western CAAD10, 1980 Univega Gran Premio
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 600 Post(s)
Likes: 0
Liked 11 Times
in
11 Posts
#9
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
Looks like a small builder, perhaps British. Prugnat 62D lugset. Rounded ends at the fork/stay transitions. Short, stubby flat-topped seatstay caps. Long Campy 1010a dropouts suggest early to mid-70s production. Basic straight-cut BB shell with chain rollers used as cable guides - those right there say low-volume builder to me.
Can anybody ID the fork crown? Haven't see that one before.
What's the BB width and threading?
DD
Can anybody ID the fork crown? Haven't see that one before.
What's the BB width and threading?
DD
#10
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
Unscrew the headset and pull the fork. If it's a Columbus fork there will be a Columbus stamp on the steerer. The chrome fork crown seems to be your most distinguishing feature, but I don't know what it is. It's even possible that the fork isn't original. The frame seems to be of pretty good quality, very possibly either Columbus or Reynolds. That may be all you ever know about it.
__________________
My Bikes
My Bikes
#11
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
I just had a thought: perhaps the under-BB routing eyes, rear stop, gear lever bosses and top tube cable guides were added later. I'm thinking this could be a repaint.
DD
DD
#12
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,790
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3590 Post(s)
Liked 3,401 Times
in
1,935 Posts
Many things about that frame look Italian, or by an Italian émigrée. What is the bottom bracket thread? Determining tubing type can be difficult, but sometimes there are clues. The rifling at the base of the steer tube, mentioned above, is one, and would indicate Columbus tubing:
Sometimes dove stamps can be seen on the tubes, particularly the steer tube. This would also indicate Columbus tubing:
Similarly, Reynolds stamped REYNOLDS 531 on many of their tubes:
But sometimes you just can't tell. And sometimes, builders used a mix of tubing types. So, if you like the bike (and I see little not to like about this bike), enjoy it and don't fret too much about the tubing.
Sometimes dove stamps can be seen on the tubes, particularly the steer tube. This would also indicate Columbus tubing:
Similarly, Reynolds stamped REYNOLDS 531 on many of their tubes:
But sometimes you just can't tell. And sometimes, builders used a mix of tubing types. So, if you like the bike (and I see little not to like about this bike), enjoy it and don't fret too much about the tubing.
#13
Member
Thread Starter
Join Date: Jul 2017
Location: Québec City
Posts: 28
Bikes: 2016 Marinoni Pista, 1981 Ompax Dura Pro, 1989 Atala Chorus, 1970's John Doe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The '72 date on your RD doesn't mean the bike is from 1972, any more than the Shimano 600 FD means its from whatever date is on that component. Most of the bikes I've seen from the 1970s have the cable routing above the bottom bracket. Not sure if there were makers who routed below BB before around 1980 or so, but it seems uncommon at best.
What size is the seat post? Have you shined a light up into the steerer tube to see if you have the SL rifling?
What size is the seat post? Have you shined a light up into the steerer tube to see if you have the SL rifling?
Seat Post is 27, and no I didn't remove the stem yet because I don't have the right tools and don't want to strip anything, but I will do it soon!
#14
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,332
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,841 Times
in
2,232 Posts
Slap some stickers on that Aluminium thing and call it a day!
Seriously tho, can't add to @Drillium Dude, but the headtube lugs are nicely filed thin. The 'stubby seatstay caps' were shorter and sometimes lighter than longer, more elegant ones. And the seatstays are nicely tapered. 1010 rear drop-outs were still being used in the early 80s, at least in UK (but mostly on Club or sport style, not race frames). And yes, paint covers a lot of possible clues or additions.
Seriously tho, can't add to @Drillium Dude, but the headtube lugs are nicely filed thin. The 'stubby seatstay caps' were shorter and sometimes lighter than longer, more elegant ones. And the seatstays are nicely tapered. 1010 rear drop-outs were still being used in the early 80s, at least in UK (but mostly on Club or sport style, not race frames). And yes, paint covers a lot of possible clues or additions.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 07-28-17 at 06:29 PM.
#15
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
It looks similar to an Alan Shorter I used to have, sorry no pics. He used 531 with Campy drops, nice long point lugs, stealth but good stuff. Low rake fork and very similar seat cluster. Kinda vague but it's something.
OP, where did you buy this?
OP, where did you buy this?
#17
Member
Thread Starter
Join Date: Jul 2017
Location: Québec City
Posts: 28
Bikes: 2016 Marinoni Pista, 1981 Ompax Dura Pro, 1989 Atala Chorus, 1970's John Doe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I bought this in Québec City, the dude's uncle (The previous owner) was Québécois for sure but I don't know where he lived or where he got the bike..
#18
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
#19
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
Marinoni commonly used heart cut outs on the lugs. Always? Maybe not.
Contact Marinoni with the serial number and pics, they'll let you know but I don't think so. There's another Quebec small maker whose name escapes me? Gianella had frames rebranded from them.
Contact Marinoni with the serial number and pics, they'll let you know but I don't think so. There's another Quebec small maker whose name escapes me? Gianella had frames rebranded from them.
Last edited by clubman; 07-28-17 at 07:36 PM.
#21
Senior Member
Join Date: Aug 2010
Location: Toronto
Posts: 1,763
Bikes: Pinarello Veneto, Pinarello Montello, Bianchi Celeste
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Looks like a small builder, perhaps British. Prugnat 62D lugset. Rounded ends at the fork/stay transitions. Short, stubby flat-topped seatstay caps. Long Campy 1010a dropouts suggest early to mid-70s production. Basic straight-cut BB shell with chain rollers used as cable guides - those right there say low-volume builder to me.
Can anybody ID the fork crown? Haven't see that one before.
What's the BB width and threading?
DD
Can anybody ID the fork crown? Haven't see that one before.
What's the BB width and threading?
DD
#22
Member
Thread Starter
Join Date: Jul 2017
Location: Québec City
Posts: 28
Bikes: 2016 Marinoni Pista, 1981 Ompax Dura Pro, 1989 Atala Chorus, 1970's John Doe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looks like a small builder, perhaps British. Prugnat 62D lugset. Rounded ends at the fork/stay transitions. Short, stubby flat-topped seatstay caps. Long Campy 1010a dropouts suggest early to mid-70s production. Basic straight-cut BB shell with chain rollers used as cable guides - those right there say low-volume builder to me.
Can anybody ID the fork crown? Haven't see that one before.
What's the BB width and threading?
DD
Can anybody ID the fork crown? Haven't see that one before.
What's the BB width and threading?
DD
Last edited by Tha Bastard; 07-29-17 at 06:10 AM.
#23
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,649
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,703 Times
in
937 Posts
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#24
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
#25
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,866
Bikes: Too many to list here check my signature.
Mentioned: 193 Post(s)
Tagged: 2 Thread(s)
Quoted: 2935 Post(s)
Liked 2,931 Times
in
1,496 Posts
Welcome to the club!!
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk